Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments     

Nassima Atmaoui  Nina Kukowski  Bernhard Stöckhert  Diethard König 《International Journal of Earth Sciences》2006,95(2):225-238

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.  相似文献   

Evaluation of three waterborne polymers as stabilizers for sandy soil     

Abdullah Al-Khanbashi  Shihab W. Abdalla 《Geotechnical and Geological Engineering》2006,24(6):1603-1625

This study reports on waterborne polymer emulsion systems that were used for structural modification of sandy soils. The first emulsion used was a styrene-acrylic, copolymer emulsion; the second and third were vinyl-acrylic, copolymer-based emulsions. Specimens were prepared by adding different polymer emulsions to the sand and water in prescribed amounts. The performance of the different emulsion systems as sand stabilizers was estimated through measurement of the hydraulic conductivity and compressive strength. Measurements of hydraulic conductivity were conducted in a flexible membrane test apparatus. The hydraulic conductivity for the three emulsions decreased at different rates, with an increase in polymer content up to 3 wt. (i.e., % by weight). Additional increase of polymer content did not introduce significant decrease in hydraulic conductivity, and, at 5 wt.%, the three emulsions had essentially the same effect. Measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. The compressive strength and modulus of elasticity of the examined emulsions increased with a higher concentration of polymer. Scanning electron microscope (SEM) revealed that the reduction in the permeability and the improved mechanical properties can be attributed to three dominant structural changes: the development of interconnecting ties between the sand particles, the development of adhesion between neighboring sand particles in contact, and the covering of the sand particles with a thin polymer film.  相似文献   

鄱阳盆地构造—沉积特征及其演化史   总被引：3，自引：3，他引：3       下载免费PDF全文

梁兴  叶舟  吴根耀  郑华平  徐克定  张廷山  刘家铎 《地质科学》2006,41(3):404

 鄱阳盆地是发育在江南—九岭和怀玉—官帽基底拆离造山带上的白垩-古近纪张扭性断陷盆地,明显受近南北走向的赣江走滑断裂系和前白垩系逆冲断裂系晚期反转的双重因素控制,呈“两坳夹一隆”的区域构造格局。受赣江、进贤—石门街走滑断裂夹持的南昌凹陷,呈近南北向凹凸相间展布格局。进贤—石门街走滑断裂以东地区,“南断北超”型断陷自南而北由北东走向渐转为北北东向展布,其源于晚印支-燕山期北东向逆冲断裂在晚期的反转作用,西缘和北部受赣江断裂系东枝走滑断裂影响明显而发生转向。鄱阳盆地经历了早白垩世晚期(冷水坞组沉积期)拉分盆地、晚白垩世早-中期(周家店组—南雄组沉积早期)走滑张扭断(坳)陷盆地、晚白垩世晚期(南雄组沉积中-晚期)走滑伸展盆地和古近纪坳陷盆地等演化阶段,东南部断陷区(江埠—二甲村凹陷)由于喜马拉雅期的隆升剥蚀而只残存周家店组早期坳陷和周家店组中期—南雄组中期断陷两个发育阶段的沉积。  相似文献   

裂缝性岩石裂缝扩展的光弹构造物理模拟——以南华北盆地户部寨沙河阶组为例   总被引：1，自引：0，他引：1       下载免费PDF全文

颜丹平  周美夫  田崇鲁  汪昌亮  张建增  郭庆银  马寅生  董铁柱 《地质学报》2005,79(5):602-607

以南华北盆地户部寨第三系沙河阶组粉砂岩低渗透储层为例,总结了其中发育的5种类型构造裂缝组合,即:①南北向雁形张节理组成的共轭剪节理带;②东西向雁形张节理组成的共轭剪节理带;③缠结状多组剪切构造裂缝;④组合状交切的多组剪切构造裂缝及张裂缝;⑤散状无序排列的构造裂缝。在此基础上,建立光弹性试验构造物理模型,沿现应力场96°方向,均匀地对该模型逐步增加外载力。结果表明,沿各组合裂缝尖端分别形成对称于裂缝走向、且主轴垂直于裂缝的Ⅰ型等色线条纹;对称于裂缝走向、且主轴平行于裂缝走向的Ⅱ型条纹和斜交于裂缝走向的复合型(Ⅲ型)条纹。第①类组合裂缝尖端以Ⅰ型等色线条纹的拉张应力和张剪应力为主;第②类组合裂缝尖端以复合型(Ⅲ型)等色线条纹的挤压应力为主;第③、④和⑤类组合裂缝尖端的应力分布较为复杂。当模型外载荷接近1000kg时,裂缝尖端起裂,并开始发育显微裂缝,而当外载荷达1100-1200 kg时,沿裂缝尖端部位形成宏观裂缝,并开始扩展。5种类型的裂缝组合扩展发育程度由强至弱依次为:①,③,⑤,②,④。其中第①类共轭裂缝组合起裂最早,扩展最快,裂缝间的连通趋势最好,说明规则分布的构造裂缝组合,在垂直于外施加载衙时更易达到连通的目的。  相似文献   

基于小波统计特性的遥感图像像素与特征联合最优融合方法   总被引：8，自引：0，他引：8  

肖刚  敬忠良  HenryLeung  王淑 《遥感学报》2005,9(4):381-386

遥感影像的IHS融合方法由于匹配误差导致光谱畸变和退化,而小波变换在变换域具有良好的分频特性,小波系数的统计特性反映了遥感影像的边缘、线和区域等显著特征。提出了基于小波统计特性的遥感影像的像素和特征联合最优融合方法,在IHS空间,对强度分量I的高频部分利用多分辨率小波融合方法进行影像的高频细节特征融合,低频部分选取光谱信息和空间分辨率评价指标作为融合权系数求优指标,进行像素级最优融合,实验结果证明了该方法的有效性。  相似文献   

南疆西部山区一次特大暴雨特征分析     

胡翠珍 《沙漠与绿洲气象(新疆气象)》2002,25(3):9-11

通过对2001年9月22－23日南疆西北部山区特大暴雨的环流背景、物理量场、卫星云图分析，揭示了这场特大暴雨的物理机制和各要素场特征。  相似文献   

A satellite-based climatology of fog and low-level stratus in Germany and adjacent areas   总被引：1，自引：0，他引：1  

Jrg Bendix 《Atmospheric Research》2002,64(1-4)

A 10-year fog climatology of Germany and adjacent areas, based on NOAA-Advanced Very High-Resolution Radiometer (AVHRR) data, is presented. Maximum fog frequency is obtained for the Lake Constance area; minimum fog occurrence, accounting for basins and river valleys, is located in the Lower Rhine area. This is a transition zone between coastal advection fog and the more continental radiation fog of the lower mountain range. Fog persistence is estimated by a comparison of night and day maps. Using the bispectral approach of Nakajima and Nakajima [J. Atmos. Sci. 52, (1995) 4043], the potential of weather satellite data for climatologies of fog's optical and microphysical properties is examined. Maps of fog optical depth, effective radius and liquid water path (LWP) are computed from well-illuminated noon images and the resulting data set is statistically evaluated. Typical features of advection fog are obtained for the coastal areas of the North and Baltic Seas, while the fog of the pre-Alpine basins reveals characteristics of continental radiation fog. The results are in general accordance with field observations of various sources.  相似文献   

Damaging properties of ground motions and prediction of maximum response of structures based on momentary energy response     

Norio Hori  Norio Inoue 《地震工程与结构动力学》2002,31(9):1657-1679

Dynamic damaging potential of ground motions must be evaluated by the response behaviour of structures, and it is necessary to indicate what properties of ground motions are most appropriate for evaluation. For that purpose, the behaviour of energy input process and hysteretic energy dissipation are investigated in this study. It is found that the momentary input energy that is an index for the intensity of input energy is related to the characteristics of earthquakes such as cyclic or impulsive, and to the response displacement of structures immediately. On the basis of these results, a procedure is proposed to predict inelastic response displacement of structures by corresponding earthquake input energy to structural dissipated damping and hysteretic energy. In this procedure the earthquake response of structures is recognized as an input and dissipation process of energy, and therefore structural properties and damaging properties of ground motions can be taken into account more generally. Lastly, the studies of the pseudodynamic loading test of reinforced concrete structure specimens subjected to ground motions with different time duration are shown. The purpose of this test is to estimate the damaging properties of ground motions and the accuracy of the proposed prediction procedure. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

H2O-CH4-H2-CO2-CO-O2在高温、高压和高密度条件下的状态方程     

胡家文 《地球化学》2002,31(4):389-394

为了计算高温，高压和高密度流体的热力学性质，提出了一个具有19个参数的维里型状态方程，其中参数与温度间的函数关系采用由Sutherland位能函数导出的维里系数近似式。除临界点附近以外，在已报道的pVT数据所覆盖的大部分超临界区域内，该方程均可适用。用该方程对H2O，CH4，H2，CO2，CO和O2等流体pVT关系的计算结果令人满意，其中pVT上限分别为：91-610GPa,1.6-11.0cm^3/mol,4000-5000K。计算体积的平均偏 小于0．8％，最大偏差小于5．4％。  相似文献   

成矿流体演化与成矿物理化学   总被引：7，自引：0，他引：7  

费红彩  肖荣阁 《矿物岩石地球化学通报》2002,21(2):139-144

成矿流体是富含挥发分 (CO2 、CH4等 )是具有较高含盐度的特殊地质流体。本文讨论了在流体演化过程中挥发分的来源 ,指出主要来自水岩作用、有机质分解及地幔去气和岩浆 ;碱金属及卤素同样具有多来源的性质 ,以海水、含盐系淋滤、建造水为主要来源 ,含盐系重熔可以形成富含碱金属的成矿流体。流体演化过程中氢氧同位素、硫同位素的分馏主要与温度、水岩比值或硫源丰度有关。一个重要的结论是 ,成矿流体的形成主要与地质作用有关 ,而流体来源是次要的。海底热水流体的地球化学特征以高δ3 4 S值、中稀土富集及正铕异常为特征。本文总结了热水流体成矿物理化学条件 ,指出水热流体物相点 :1) 10 80℃ ,7.5× 10 8Pa水溶液与硅酸岩熔浆分熔点 ;2 )水溶液的第二个临界点是气水溶液的超临界点 (374.15℃ ,2 .2 1× 10 7Pa) ;3)水溶液的沸点 (≥ 10 0℃ ,≥ 1× 10 5Pa) ;4)水溶液的冰点 (≤ 0℃ ,1× 10 5Pa) ;5 )H2 O CO2 体系的不混溶温度点 (2 6 6℃ ,2 .15×10 8Pa[1 3 ] 等是重要的成矿相变点。  相似文献