利用超快速精密星历约束的北斗卫星实时精密定轨     

范磊  施闯  李敏 《大地测量与地球动力学》2018,38(9):937-942

以广播星历为起算轨道的北斗卫星实时滤波精密定轨往往需要较长收敛时间，针对此，提出利用超快速精密星历约束的实时精密定轨方法。通过MGEX跟踪网全球分布的51个测站连续7 d的实测数据，利用平方根信息滤波对北斗卫星实时精密轨道进行确定，并以3 d解事后轨道作为参考，评估北斗卫星实时滤波轨道精度。结果表明，利用广播星历作起算轨道时，北斗实时滤波轨道平均需要经过15 h收敛才能达到稳定，而新方法在这段时间内轨道变化较为平稳，未出现明显的收敛现象，并且7 d时间内GEO卫星在切向、法向和径向上RMS分别优于2.5 m、20 cm和30 cm，IGSO和MEO卫星在3个方向上分别优于30 cm、15 cm和10 cm。
  相似文献   

基于高斯两步移动搜寻法的村镇避难场所可达性研究     

但文羽  肖映辉  胡周灵  詹庆明 《地球信息科学学报》2018,20(10):1412-1421

避难场所可达性是指避难场所与受灾居民之间的通达性,即灾害发生时,避难人员通过避难疏散通道到达避难场所的难易程度,是评价避难场所布局合理性的重要指标。本研究结合高斯两步移动搜寻法和网络分析法,从供需双向出发对村镇地区避难场所进行可达性分析。2种方法的结合,既充分考虑了需求点与设施点的相互作用,又充分考虑了设施点的吸引力随距离的衰减关系,并基于实际道路,以步行疏散时间作为搜索半径,降低了传统研究中因忽略供需间相互作用及实际距离而引起的可达性结果的误差。最后,以神农架松柏镇区为例,验证该方法的实际应用价值。结果表明,该方法能够有效测定村镇地区避难场所的空间可达性,同时,基于GIS软件可以直观地揭示研究区域内避难场所可达性空间分布差异。该方法可为制定科学的村镇防灾减灾规划提供方法支持。  相似文献   

Bearing capacity of offshore umbrella suction anchor foundation in silty soil under varying loading modes     

Qi Yang  Guanglai Pan  Quandi Wang 《Marine Georesources & Geotechnology》2018,36(7):781-794

Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified.  相似文献   

基于圆柱多段拟合的隧道中轴线提取方法研究     

荆海峰  李广云  王力  杨文锋 《大地测量与地球动力学》2018,38(2):211-215

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理，并将点云按隧道走向分成不同区段；然后对各区段依据轴线与表面点云法线垂直关系，提取精度较低的中轴线；最后对各区段利用圆柱多段拟合，提取精度较高的中轴线。实验表明，隧道中轴线的提取在一定的采样区间具有较高的稳定性，对直线和弯曲的圆形隧道有良好的适用性，算法可靠，精度较高。  相似文献   

青海湖流域植被盖度时空变化研究     

高黎明  张乐乐 《地球信息科学学报》2019,21(9):1318-1329

高寒区植被变化一直是气候和生态学领域关注的热点问题。本研究基于MODIS NDVI数据计算的植被覆盖度数据和高分辨率气象数据,分析了青海湖流域2001-2017年植被覆盖度分布格局及动态变化,探讨了其对气候变化、人类活动和冻土退化的响应。结果表明：① 近十几年青海湖流域植被覆盖度整体表现为增加趋势,不同植被类型增幅存在差异性,草地增幅最大,达到6.1%/10a,其它植被类型增幅在2%~3%/10a之间;② 流域局部地区仍存在植被退化现象,研究期植被退化面积表现为先增加后减小的变化趋势。2006-2011年重度退化区集中在青海湖东岸,2011-2017年重度退化区集中在流域的西北部,这些区域是青海湖流域荒漠分布区,植被覆盖度较低,是今后生态恢复需重点关注的区域;③ 气候变化是流域植被覆盖度变化的主导因素,气候变化对青海湖流域主要植被类型覆盖度变化的贡献率为84.21%,对草原、草甸和灌丛植被覆盖度变化的贡献率分别为81.84%、87.47%和75.96%;④ 人类活动对流域主要植被类型覆盖度变化的贡献率为15.79%,对草原、草甸和灌丛植被覆盖度变化的贡献率分别为18.16%、12.53%和24.04%,环青海湖地区人类活动对植被恢复有促进效应,在青海湖流域北部部分地区人类活动的破坏力度仍大于建设力度;⑤ 冻土退化对青海湖流域草甸和灌丛植被覆盖度变化影响很小,主要影响草原植被覆盖度变化,冻土退化造成草原植被覆盖度增长速率减小了1.2%/10a。  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

Wave tank and bench-top control testing of a wave energy converter     

《Applied Ocean Research》2019

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.  相似文献   

Damage assessment for submarine photoelectric composite cable under anchor impact     

《Applied Ocean Research》2018

The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering.  相似文献   

Modelling the poroelastoplastic behaviour of soils subjected to internal erosion by suffusion     

Quentin Rousseau  Giulio Sciarra  Rachel Gelet  Didier Marot 《国际地质力学数值与分析法杂志》2020,44(1):117-136

Granular soils subjected to seepage flow may suffer suffusion, ie, a selective internal erosion. Extending the classical approach of poromechanics, we deduce a new form of the Clausius-Duhem inequality accounting for dissipation due to suffusion, and we deduce restrictions on the constitutive laws of the soil. We suggest (a) a possible coupling between the seepage forces and the suffusion kinetics and (b) an extension of an existing elastoplastic model for the skeleton mechanical behaviour. Numerical integrations of the elastoplastic model are carried out under drained axisymmetric triaxial and oedometric conditions. As a result, we prove that the extended model is able to qualitatively reproduce the suffusion induced strains and the strength reduction experimentally observed. Predictions on the oedometric behaviour of suffusive soils are also provided.  相似文献