A scanning electron microscope study of the effects of dynamic recrystallization on lattice preferred orientation in olivine     

Kyung-Ho Lee  Zhenting Jiang  Shun-ichiro Karato   《Tectonophysics》2002,351(4)

Effects of dynamic recrystallization on lattice preferred orientation (LPO) in olivine were investigated through the combination of two SEM-based techniques, electron backscattered diffraction (EBSD) technique for crystallographic orientation measurement and backscattered electron imaging (BEI) for dislocation observation. Samples are experimentally deformed olivine aggregates in simple shear geometry. In the sample deformed at T=1473 K and high stresses (480 MPa), only incipient dynamic recrystallization is observed along grain-boundaries. Orientations of these small recrystallized grains are more random than that of relict grains, suggesting an important role of grain-boundary sliding at this stage of recrystallization. In the sample deformed at T=1573 K and low stress (160 MPa), dynamic recrystallization is nearly complete and the LPO is characterized by two [100] peaks. One peak is located at the orientation subparallel to the shear direction and is dominated by grains with high Schmid factor. The other occurs at high angles to the shear direction and is due to the contribution from grains with low Schmid factor. Grains with high Schmid factor tend to have higher dislocation densities than those with low Schmid factor. Based on these observations, we identify two mechanisms by which dynamic recrystallization affects LPO: (1) enhancement of grain-boundary sliding due to grain-size reduction, leading to the modification of LPO caused by the relaxation of constraint for deformation; (2) grain-boundary migration by which grains with lower dislocation densities grow at the expense of grains with higher dislocation densities. Based on the deformation mechanism maps and stress versus recrystallized grain-size relation, we suggest that the first mechanism always plays an important role whereas the second mechanism has an important effect only under limited conditions.  相似文献   

Directional dependence of P- and S-wave propagation and polarization in foliated rocks from the Kola superdeep well: Evidence from laboratory measurements and calculations based on TOF neutron diffraction   总被引：1，自引：0，他引：1  

T.I. Ivankina  H.M. Kern  A.N. Nikitin 《Tectonophysics》2005,407(1-2):25-42

We have measured P- and S-wave velocities on two amphibolite and two gneiss samples from the Kola superdeep borehole as a function of pressure (up to 600 MPa) and temperature (up to 600 °C). The velocity measurements include compressional (Vp) and shear wave velocities (Vs1, Vs2) propagating in three orthogonal directions which were in general not parallel to inherent rock symmetry axes or planes. The measurements are accompanied by 3D-velocities calculations based on lattice preferred orientation (LPO) obtained by TOF (Time Of Flight) neutron diffraction analysis which allows the investigation of bulk volumes up to several cubic centimetres due to the high penetration depth of neutrons. The LPO-based numerical velocity calculations give important information on the different contribution of the various rock-forming minerals to bulk elastic anisotropy and on the relations of seismic anisotropy, shear wave splitting, and shear wave polarization to the structural reference frame (foliation and lineation). Comparison with measured velocities obtained for the three propagation directions that were not in accordance with the structural frame of the rocks (foliation and lineation) demonstrate that for shear waves propagating through anisotropic rocks the vibration directions are as important as the propagation directions. The study demonstrates that proper measurement of shear wave splitting by means of two orthogonal polarized sending and receiving shear wave transducers is only possible when their propagation and polarization directions are parallel and normal to foliation and lineation, respectively.  相似文献   

Boundary effects on the Soil Water Characteristic Curves obtained from lattice Boltzmann simulations     

《Computers and Geotechnics》2016

  相似文献   

晶体点阵参数最小二乘法计算程序     

陈蓉美 《湖南地质》1990,9(1):54-59

作者以最小二乘法理法导出了晶体点阵参数计算的公式,并顾及了X射线粉晶衍射图测定所引起的系统误差修正,从而得到点阵参数的最佳估值。以导出的公式为数学模型编制了PC-1500微机的扩展BASIC语言程序,可适用于各晶系点阵参数的计算,使用方便。  相似文献   

格子玻尔兹曼方法及其在大气湍流研究中的应用     

程雪玲  胡非  赵松年  姜金华 《地球科学进展》2007,22(3):249-260

文章的目的是对格子玻尔兹曼方法进行系统的介绍，格子玻尔兹曼方法(Lattice Boltzmann Method)的出现直接来源于20世纪60年代的元胞自动机(Cellular Automata)思想，而这一方法用于解决流动现象时，又可以追溯到19世纪的分子运动论，求解的是Boltzmann提出的玻尔兹曼输运方程，因此将这一方法称为格子玻尔兹曼方法，之前也被称为格子气自动机(Lattice Gas Automaton)。该方法多用于研究复杂现象，如材料晶体凝聚时的生长过程、城市土地利用的演化等方面。在20世纪70年代由Hardy、Pomeau和Pazzis建立了第一个用于研究流体运动的格子气自动机，此后，这一方法被广泛用来模拟各种流动问题，诸如二相流、孔隙介质中的渗流等，并根据这一方法开发了相应的商业软件PowerFlow。同时，格子玻尔兹曼方法由于其在微观水平描述运动的特点，成为研究湍流的一个很好的数值计算工具，特别是用其进行直接数值模拟(DNS)计算，成为继传统的差分法、有限体积法和谱方法之后的又一有力的手段。而作为大气运动的一个主要现象的大气湍流，比普通湍流更加复杂，在这里着重介绍了大气湍流的特点和应用格子玻尔兹曼方法模拟湍流的发展过程。  相似文献   

3D image-based characterization of fluid displacement in a Berea core     

M. Prodanović  W.B. Lindquist  R.S. Seright 《Advances in water resources》2007

Improved network flow models require the incorporation of increasingly accurate geometrical characterization of the microscale pore structure as well as greater information on fluid–fluid interaction (interfaces) at pore scales. We report on three dimensional (3D) pore scale medium characterization, absolute permeability computations for throat structures, and pore scale residual fluid distribution in a Berea core. X-ray computed microtomography combined with X-ray attenuating dopants is used to obtain 3D images of the pore network and to resolve phase distributions in the pore space.  相似文献   

有限元离散模型中的出平面运动形式     

关慧敏  李小军 《华南地震》1993,13(2):1-6

波动在有限元离散模型中传播时,会出现许多不同于连续介质中波动的现象.本文引用经典物理学中晶格动力学的分析方法,由有限元离散形式的出平面波动方程得到频散关系,在此基础上,讨论了集中质量有限元模型中各种可能的出平面运动形式,并分析了考虑时域离散化影响下各种形式可能存在的频率范围.  相似文献   

Wind-Driven, Double-Gyre, Ocean Circulation in a Reduced-Gravity, 2.5-Layer, Lattice Boltzmann Model     

钟霖浩  冯士德  罗德海  高守亭 《大气科学进展》2006,23(4):561-578

A coupled lattice Boltzmann （LB） model with second-order accuracy is applied to the reduced-gravity, shallow water, 2.5-layer model for wind-driven double-gyre ocean circulation. By introducing the secondorder integral approximation for the collision operator, the model becomes fully explicit. The Coriolis force and other external forces are included in the model with second-order accuracy, which is consistent with the discretization accuracy of the LB equation. The feature of the multiple equilibria solutions is found in the numerical experiments under different Reynolds numbers based on this LB scheme. With the Reynolds number increasing from 3000 to 4000, the solution of this model is destabilized from the anti-symmetric double-gyre solution to the subtropic gyre solution and then to the subpolar gyre solution. The transitions between these equilibria states are also found in some parameter ranges. The time-dependent variability of the circulation based on this LB simulation is also discussed for varying viscosity regimes. The flow of this model exhibits oscillations with different timescales varying from subannual to interannual. The corresponding statistical oscillation modes are obtained by spectral analysis. By analyzing the spatiotemporal structures of these modes, it is found that the subannual oscillation with a 9-month period originates from the barotropic Rossby basin mode, and the interarmual oscillations with periods ranging from 1.5 years to 4.6 years originate from the recirculation gyre modes, which include the barotropic and the baroclinic recirculation gyre modes.  相似文献   

孔隙尺度多孔介质流体流动与溶质运移高性能模拟          下载免费PDF全文

周鸿翔  郑延丰  吴劳生  陈铖  曾令藻 《水科学进展》2020,31(3):422-432

深入探究孔隙尺度下的流体流动特性和溶质运移规律对石油开采、农田养分管理、地下水污染修复有着重要意义。以人工构建的多孔介质结构和同步辐射X射线显微CT扫描的土壤团聚体(分辨率3.7μm)为研究对象,在空间节点数多达64 000 000的情况下,基于格子Boltzmann模型和GPU并行技术计算得到多孔介质流体运动和溶质运移过程的关键参数,并据此探究多孔介质空间异质性对水力学特性的影响。通过对3组不同结构的多孔介质比较发现,结构复杂程度最高的土壤样品和不规则堆叠的圆球结构的渗透率在100 mD(即10^-13m^2)量级,远低于规则堆叠的圆球结构(>20 000 mD);土壤的迂曲度为1.40~1.60,明显高于规则堆叠的圆球结构。研究结果表明,渗透率大的样品具有较小的迂曲度,这与结构的空间异质性有较强的关系;土壤的渗透率和迂曲度呈现各向异性;在水力梯度一定的前提下,渗透率较大的样品,纵向弥散系数也较大;同时,结构的异质性也会影响溶质的穿透曲线。本研究提出的模拟方法可在土壤结构中进行高效的水流运动和溶质运移模拟,可用于土壤多孔介质在孔隙尺度下的水力学特性研究。  相似文献   

Effect of macropore tortuosity and morphology on preferential flow through saturated soil: A Lattice Boltzmann study     

《Computers and Geotechnics》2014

Unlike micropores where water moves upward or downward based on hydraulic gradient, in macropores, water flows predominantly downward due to the gravity. Therefore, models based on capillary flow are not capable of simulating macropore flow. There are attempts to model the macropore flow using two domains, one for capillary flow and another one for macropores. These models use Richard’s equation for capillary flow and Poiseuille’s law for macropores in which the macropore is approximated to be cylindrical or planar. This study quantifies the magnitudes of the errors induced by this assumption. Influence of macropore shapes and tortuosity was quantified by using a 3D Lattice Boltzmann model, which is capable of simulating fluid flow in micropores as well as macropores of cracked clays. Artificial macropores of constant sectional area and volume, but different shapes were generated in 3D and the influence of macropore shapes, shape related parameters, and tortuosity were systematically investigated. Macropore flow rate decreases with different shapes compared to cylindrical macropores and increase in aspect ratio of sectional shape leads to decrease in macropore flow rate. The maximum effect of bends/turnings along the tortuous macropore was about 25% on overall decrease of flow rate due to tortuosity. However, more detailed study is required on the influence of bends on macropore flow rate. The macropore flow rate reduces by about 70% for tortuosity of 1.41. A prediction equation is verified to predict the flow rate of different shapes and tortuous macropores based on straight cylindrical macropore using aspect ratio and tortuosity factor.  相似文献