Constraints on the application of carbon isotope thermometry in high- to ultrahigh-temperature metamorphic terranes   总被引：7，自引：0，他引：7  

M. Satish-Kumar  H. Wada  M. Santosh 《Journal of Metamorphic Geology》2002,20(3):335-350

Nine marble horizons from the granulite facies terrane of southern India were examined in detail for stable carbon and oxygen isotopes in calcite and carbon isotopes in graphite. The marbles in Trivandrum Block show coupled lowering of δ¹³C and δ¹⁸O values in calcite and heterogeneous single crystal δ¹³C values (? 1 to ? 10‰) for graphite indicating varying carbon isotope fractionation between calcite and graphite, despite the granulite facies regional metamorphic conditions. The stable isotope patterns suggest alteration of δ¹³C and δ¹⁸O values in marbles by infiltration of low δ¹³C–δ¹⁸O‐bearing fluids, the extent of alteration being a direct function of the fluid‐rock ratio. The carbon isotope zonation preserved in graphite suggests that the graphite crystals precipitated/recrystallized in the presence of an externally derived CO₂‐rich fluid, and that the infiltration had occurred under high temperature and low f_O2 conditions during metamorphism. The onset of graphite precipitation resulted in a depletion of the carbon isotope values of the remaining fluid+calcite carbon reservoir, following a Rayleigh‐type distillation process within fluid‐rich pockets/pathways in marbles resulting in the observed zonation. The results suggest that calcite–graphite thermometry cannot be applied in marbles that are affected by external carbonic fluid infiltration. However, marble horizons in the Madurai Block, where the effect of fluid infiltration is not detected, record clear imprints of ultrahigh temperature metamorphism (800–1000 °C), with fractionations reaching <2‰. Zonation studies on graphite show a nominal rimward lowering δ¹³C on the order of 1 to 2‰. The zonation carries the imprint of fluid deficient/absent UHT metamorphism. Commonly, calculated core temperatures are > 1000 °C and would be consistent with UHT metamorphism.  相似文献   

Charnockitic magmatism in southern India   总被引：2，自引：0，他引：2  

H. M. Rajesh  M. Santosh 《Journal of Earth System Science》2004,113(4):565-585

Large charnockite massifs cover a substantial portion of the southern Indian granulite terrain. The older (late Archaean to early Proterozoic) charnockites occur in the northern part and the younger (late Proterozoic) charnockites occur in the southern part of this high-grade terrain. Among these, the older Biligirirangan hill, Shevroy hill and Nilgiri hill massifs are intermediate charnockites, with Pallavaram massif consisting dominantly of felsic charnockites. The charnockite massifs from northern Kerala and Cardamom hill show spatial association of intermediate and felsic charnockites, with the youngest Nagercoil massif consisting of felsic charnockites. Their igneous parentage is evident from a combination of features including field relations, mineralogy, petrography, thermobarometry, as well as distinct chemical features. The southern Indian charnockite massifs show similarity with high-Ba-Sr granitoids, with the tonalitic intermediate charnockites showing similarity with high-Ba-Sr granitoids with low K₂O/Na₂O ratios, and the felsic charnockites showing similarity with high-Ba-Sr granitoids with high K₂O/Na₂O ratios. A two-stage model is suggested for the formation of these charnockites. During the first stage there was a period of basalt underplating, with the ponding of alkaline mafic magmas. Partial melting of this mafic lower crust formed the charnockitic magmas. Here emplacement of basalt with low water content would lead to dehydration melting of the lower crust forming intermediate charnockites. Conversely, emplacement of hydrous basalt would result in melting at higher {ie565-01} favoring production of more siliceous felsic charnockites. This model is correlated with two crustal thickening phases in southern India, one related to the accretion of the older crustal blocks on to the Archaean craton to the north and the other probably related to the collision between crustal fragments of East and West Gondwana in a supercontinent framework.  相似文献   

Late Pleistocene-Holocene Paleoclimatic History of the Southern Kerala Basin, Southwest India     

K. Jayalakshmi  K.M. Nair  Hisao Kumai  M. Santosh 《Gondwana Research》2004,7(2):585-594

The South Kerala Sedimentary Basin (SKSB) constitutes one of the most significant landward extensions of the southwest offshore sedimentary basins of India, and is situated between 8^o45^' and 10^o15^' N latitudes. With a maximum width of about 20 km and incorporating a 700 m thick sedimentary succession ranging in age from Early Miocene to Holocene, this belt lies almost entirely under water or alluvium-covered coastal plains. In this study, we use two continuously cored bore holes at Eruva (7.25m deep) and Muthukulam (3m deep) separated by a distance of about 7km to investigate the depositional environment as well as paleo ecology of the depocentre and climatic aspects during the Late Pleistocene and Holocene. Results from C¹⁴ dating of shell fragments from Eruva (depth zone: 2.10–6.64m) yielded ages in the range of 36.2 to 42.5 kyBP corresponding to the late Pleistocene. Wood fragments in the Muthukulam core sample (depth zone: 1.27–3.00m) gave C¹⁴ ages in the range of 3.7 to 7.2 kyBP indicating a Holocene history. The lower half of the Eruva bore hole indicates a marginal marine environment with an abundant supply of terrestrial carbonaceous debris probably corresponding to a period of abnormally high rainfall recorded in many parts of the globe covered by the Asian summer monsoon. The sediments in the upper part of this bore hole indicate a continuation of this environment but with much less input of terrestrial organic carbon. The lower part of the bore hole from this locality, corresponding to the Holocene transgression, is similar to the lower part of Eruva bore hole in the case of TOC. Deposition took place in water bodies with considerable marine influence but receiving high amounts of terrestrial plant debris-mostly in the form of finely divided particles mixed with mud. This transgressive sequence was also deposited during a time when the Asian summer monsoon was abnormally high in intensity as indicated by many examples in India, Africa, Madagascar and elsewhere. It is significant that during the deposition of this part, the sea level was probably the same as present or higher suggesting possible lowering of the stream velocities and resultant deposition of only muddy sediments laden with terrestrial organic material along the coast. The upper part of the section shows a progressively reduced rainfall pattern culminating in a period of very low precipitation with the development of a paleosol, which is traceable all over the SKSB where Late Holocene sediments are available. This period also witnessed aeolian activity modifying the sand ridges in the ridge-runnel systems formed by the Holocene regression.  相似文献   

Future supercontinent assembled in the northern hemisphere     

Masaki Yoshida  M. Santosh 《地学学报》2011,23(5):333-338

  相似文献   

Constraints on the timing and conditions of high‐grade metamorphism,charnockite formation and fluid–rock interaction in the Trivandrum Block,southern India          下载免费PDF全文

E. Blereau  C. Clark  R. J. M. Taylor  T. E. Johnson  I. C. W. Fitzsimons  M. Santosh 《Journal of Metamorphic Geology》2016,34(6):527-549

Incipient charnockites have been widely used as evidence for the infiltration of CO₂‐rich fluids driving dehydration of the lower crust. Rocks exposed at Kakkod quarry in the Trivandrum Block of southern India allow for a thorough investigation of the metamorphic evolution by preserving not only orthopyroxene‐bearing charnockite patches in a host garnet–biotite felsic gneiss, but also layers of garnet–sillimanite metapelite gneiss. Thermodynamic phase equilibria modelling of all three bulk compositions indicates consistent peak‐metamorphic conditions of 830–925 °C and 6–9 kbar with retrograde evolution involving suprasolidus decompression at high temperature. These models suggest that orthopyroxene was most likely stabilized close to the metamorphic peak as a result of small compositional heterogeneities in the host garnet–biotite gneiss. There is insufficient evidence to determine whether the heterogeneities were inherited from the protolith or introduced during syn‐metamorphic fluid flow. U–Pb geochronology of monazite and zircon from all three rock types constrains the peak of metamorphism and orthopyroxene growth to have occurred between the onset of high‐grade metamorphism at c. 590 Ma and the onset of melt crystallization at c. 540 Ma. The majority of metamorphic zircon growth occurred during protracted melt crystallization between c. 540 and 510 Ma. Melt crystallization was followed by the influx of aqueous, alkali‐rich fluids likely derived from melts crystallizing at depth. This late fluid flow led to retrogression of orthopyroxene, the observed outcrop pattern and to the textural and isotopic modification of monazite grains at c. 525–490 Ma.  相似文献   

Spring temperatures in the far-western Nepal Himalaya since AD 1640 reconstructed from Picea smithiana tree-ring widths     

Udya Kuwar Thapa  Santosh K. Shah  Narayan Prasad Gaire  Dinesh Raj Bhuju 《Climate Dynamics》2015,45(7-8):2069-2081

  相似文献   

Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings     

Santosh Kumar Yadav  Guan-lin Ye  Usama Khalid 《Marine Georesources & Geotechnology》2020,38(4):400-416

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.  相似文献   

Analysis on the effect of salinity in underwater wireless optical communication     

Sanjay Kumar  Jinka Venkata Aravind  Santosh Kumar G 《Marine Georesources & Geotechnology》2020,38(3):291-301

Abstract

This article deals with the effect of salinity variation on underwater wireless optical communication (UWOC). Effect of different concentration of salt on underwater optical communication has been carried out experimentally in terms of received power at different link lengths. Based on the analysis of experimental data, a mathematical model has been proposed to describe the saline water channel. A simulation study is performed for different data rates and link lengths. It is seen that with increased salinity the attenuation is higher and the UWOC system performance degrades with higher data rate and increased link length.  相似文献   

Isotope geochemistry and Re–Os geochronology of the Yanjiagou Mo deposit in the central North China Craton     

W.&#x;Y. Sun  S.&#x;R. Li  M. Santosh  X.&#x;Y. Zhang 《Geological Journal》2015,50(4):509-529

The Yanjiagou deposit, located in the central North China Craton (NCC), is a newly found porphyry‐type Mo deposit. The Mo mineralization here is spatially associated with the Mapeng batholith. In this study, we identify four stages of ore formation in this deposit: pyrite phyllic stage (I), quartz–pyrite stage (II), quartz–pyrite–molybdenite stage (III), which is the main mineralization stage, and quartz–carbonate stage (IV). We present sulphur and lead isotope data on pyrite, and rhenium and osmium isotopes of molybdenite from the porphyry deposit and evaluate the timing and origin of ore formation. The δ³⁴S values of the pyrite range from ‐1.1‰ to −0.6‰, with an average of −0.875‰, suggesting origin from a mixture of magmatic/mantle sources and the basement rocks. The Pb isotope compositions of the pyrite show a range of 16.369 to 17.079 for ²⁰⁶Pb/²⁰⁴Pb, 15.201 to 15.355 for ²⁰⁷Pb/²⁰⁴Pb, and 36.696 to 37.380 for ²⁰⁸Pb/²⁰⁴Pb, indicating that the ore‐forming materials were derived from a mixture of lower crust (or basement rocks) and mantle. Rhenium contents in molybdenite samples from the main ore stage are between 74.73 to 254.43 ppm, with an average of 147.9 ppm, indicating a mixed crustal‐mantle source for the metal. Eight molybdenite separates yield model ages ranging from 124.17 to 130.80 Ma and a mean model age of 128.46 Ma. An isochron age of 126.7 ± 1.1 Ma (MSWD = 2.1, initial ¹⁸⁷Os = 0.0032 ± 0.0012 ppb) is computed, which reveals a close link between the Mo mineralization and the magmatism that generated the Mapeng batholith. The age is close to the zircon U–Pb age of ca. 130 Ma from the batholith reported in a recent study. The age is also consistent with the timing of mineralization in the Fuping ore cluster in the central NCC, as well as the peak time of lithosphere thinning and destruction of the NCC. We evaluate the spatio‐temporal distribution of the Mo deposits in the NCC and identify three important molybdenum provinces along the northern and southern margins of the craton formed during three distinct episodes: Middle to Late Triassic (240–220 Ma), Early Jurassic (190–175 Ma), and Late Jurassic to Early Cretaceous (150–125 Ma). The third period is considered to mark the most important metallogenic event, coinciding with the peak of lithosphere thinning and craton destruction in the NCC. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Mineralogy and geochemistry of granitoids from Kinnaur region,Himachal Higher Himalaya,India: Implication on the nature of felsic magmatism in the collision tectonics     

Brajesh Singh  Santosh Kumar  Masao Ban  Kazuo Nakashima 《Journal of Earth System Science》2016,125(7):1329-1352

Felsic magmatism in the southern part of Himachal Higher Himalaya is constituted by Neoproterozoic granite gneiss (GGn), Early Palaeozoic granitoids (EPG) and Tertiary tourmaline-bearing leucogranite (TLg). Magnetic susceptibility values (<3 ×10^?3 SI), molar Al₂ O ₃/(CaO + Na₂ O + K ₂O) (≥1.1), mineral assemblage (bt–ms–pl–kf–qtz ± tur ± ap), and the presence of normative corundum relate these granitoids to peraluminous S-type, ilmenite series (reduced type) granites formed in a syncollisional tectonic setting. Plagioclase from GGn (An₁₀–An₃₁) and EPG (An₁₅–An₃₃) represents oligoclase to andesine and TLg (An₂–An₁₅) represents albite to oligoclase, whereas compositional ranges of K-feldspar are more-or-less similar (Or₈₈ to Or₉₅ in GGn, Or₈₆ to Or₉₇ in EPG and Or₈₇ to Or₉₄ in TLg). Biotites in GGn (Mg/Mg + Fe^t= 0.34–0.45), EPG (Mg/Mg + Fe^t= 0.27–0.47), and TLg (Mg/Mg + Fe^t= 0.25–0.30) are ferribiotites enriched in siderophyllite, which stabilised between FMQ and HM buffers and are characterised by dominant 3Fe\(\rightleftharpoons \)2Al, 3Mg\(\rightleftharpoons \)2Al substitutions typical of peraluminous (S-type), reducing felsic melts. Muscovite in GGn (Mg/Mg + Fe^t=0.58–0.66), EPG (Mg/Mg + Fe^t=0.31?0.59), and TLg (Mg/Mg + Fe^t=0.29–0.42) represent celadonite and paragonite solid solutions, and the tourmaline from EPG and TLg belongs to the schorl-elbaite series, which are characteristics of peraluminous, Li-poor, biotite-tourmaline granites. Geochemical features reveal that the GGn and EPG precursor melts were most likely derived from melting of biotite-rich metapelite and metagraywacke sources, whereas TLg melt appears to have formed from biotite-muscovite rich metapelite and metagraywacke sources. Major and trace elements modelling suggest that the GGn, EPG and TLg parental melts have experienced low degrees (～13, ～17 and ～13%, respectively) of kf–pl–bt fractionation, respectively, subsequent to partial melting. The GGn and EPG melts are the results of a pre-Himalayan, syn-collisional Pan-African felsic magmatic event, whereas the TLg is a magmatic product of Himalayan collision tectonics.  相似文献