排序方式： 共有31条查询结果，搜索用时 861 毫秒
11.
12.
13.
HDPE圆形升降式网箱下沉时最大倾角的研究 总被引：4，自引：0，他引：4
分析了1种HDPE双浮管圆形升降式网箱的沉降过程,并利用几何分析方法找出该升降式网箱沉降的最大倾角与网箱系统参数之间的关系,制作1个圆形升降式网箱模型,在静水池中进行沉降实验。试验过程中,通过水下摄像及图像处理软件找出网箱沉降时的最大倾角。模型网箱最大沉降倾角的理论计算值为22.77(°),实验观测值20.80(°),二者误差为9.4%,最大倾角的理论计算值和试验测量值基本吻合,说明理论计算方法是可行的。据此,计算出国内常用的周长40 m的HDPE双浮管圆形升降式网箱的最大沉降倾角为31.29(°)。并以周长40 m的双浮管HDPE圆形升降式网箱的尺度参数作为参考,分析该网箱浮绳框边长、沉降水深和网箱直径与网箱最大沉降倾角的关系,得出这三者与沉降倾角呈线性关系的结果,为HDPE双浮管圆形升降式网箱的设计及安全操作提供了理论依据。 相似文献
14.
参照渔业生物学、渔业资源解析学、数量遗传学等有关理论模型，并应用数值模拟方法，对长期选择性捕捞（重点为渔具选择性）是否参与造成了渔业资源的生物学变化（体长、性成熟等）进行某些基础性探索。设计了一个具有一定体长遗传特征的模拟鱼类种群，并利用一种具有固定选择性参数的拖网对其进行长期捕捞。结果表明，多年的持续的捕捞压力使得模拟种群中鱼类体长逐渐减小，减小的幅度随开发率的增大而增大，而终止捕捞后种群的体长并没有发生恢复的迹象，说明这种变化很可能伴随种群遗传的变化，具有自然不可逆性。 相似文献
15.
刺网选择性对鱼类表型性状的选择作用研究 总被引：2，自引：0，他引：2
本研究从刺网选择性对鱼类表型性状的影响入手,应用数值模拟方法,模拟了一个具有一定体长特征的鱼类种群,利用具有多项选择参数(曲线标准差σ,最适体长l0,选择性因素R0)的刺网曲线对其进行长期捕捞作用,并在去除捕捞的情况下探讨这种影响的稳定性。结果表明,刺网捕捞作业长期作用于鱼类种群,会对种群体长组成产生深远的影响,开发率(E)越大,效果越明显。当刺网最适捕捞体长与初始种群优势体长重合时(l0=15),造成种群体长分布峰值的分化;如果l0>15,则导致种群体长组成向小型化方向偏移;反之则会造成种群体长组成向大型化方向偏移;而且这种影响可能伴随遗传因素,具有不可逆性。 相似文献
16.
Particle image velocimetry and numerical simulations of the hydrodynamic characteristics of an artificial reef 总被引：2，自引：0，他引：2
This article reports a particle image velocimetry study and the comparative results of a numerical simulation into the hydrodynamic characteristics around an artificial reef.We reveal the process of flow separation and vortex evolution,and compare the force terms generated by our artificial reef model.The numerical simulation agrees well with experimental results,showing the applicability of computational fluid dynamics to the hydrodynamics of an artificial reef.Furthermore,we numerically simulate the hydrodynamics of the reef model for seven velocities.The results show that the drag coefficient is approximately 1.21 in a self-modeling region for Reynolds numbers between 2.123×104and 9×104.Therefore,the upwelling height and current width of the flow field do not change significantly when the inflow velocity increases.Our study indicates that computational fluid dynamics can be applied to study the hydrodynamics of an artificial reef and offer clues to its construction. 相似文献
17.
小型单拖网渔船V 型网板水动力性能研究 总被引：1，自引：0，他引：1
网板是拖网的重要属具之一, 广泛应用于近岸小型单拖渔船的生产作业中, 其水动力性能的优劣直接关系到拖网的生产效果和经济效益。作者以网板面积1 m2、展弦比0.55的 V 型网板为例进行小型单拖渔船的水动力性能研究。 基于田内相似准则, 相似比为2制作网板模型, 进行循环水槽模型试验, 实验冲角在10～60°范围内, 来流速度在0.2～0.7 m/s, 得出网板升阻力系数等流体动力特性曲线、临界冲角、最大升阻比。结果表明, 该型网板的最大升阻比约为1.86, 达到最大升阻比的临界冲角在15～25°附近, 该结果可为渔业生产操作中网板冲角的设置提供依据。实验结果同时显示, 该型网板的水动力效率略低于其他类型网板, 说明其板型仍有较大的改进空间。 相似文献
18.
The estimation of gear selectivity is a critical issue in fishery stock assessment and management. Several methods have been
developed for estimating gillnet selectivity, but they all have their limitations, such as inappropriate objective function
in data fitting, lack of unique estimates due to the difficulty in finding global minima in minimization, biased estimates
due to outliers, and estimations of selectivity being influenced by the predetermined selectivity functions. In this study,
we develop a new algorithm that can overcome the above-mentioned problems in estimating the gillnet selectivity. The proposed
algorithms include minimizing the sum of squared vertical distances between two adjacent points and minimizing the weighted
sum of squared vertical distances between two adjacent points in the presence of outliers. According to the estimated gillnet
selectivity curve, the selectivity function can also be determined. This study suggests that the proposed algorithm is not
sensitive to outliers in selectivity data and improves on the previous methods in estimating gillnet selectivity and relative
population density of fish when a gillnet is used as a sampling tool. We suggest the proposed approach be used in estimating
gillnet selectivity. 相似文献
19.
Flume experiments and numerical simulation were conducted to characterize the hydrodynamics of a trapezoid artificial reef. Measurements in particle image velocimetry were conducted to observe the formation of upwelling and vortices; and forces for the reef model were measured by load cell. The results of flume experiments agree well with the numerical data. In addition, the flow structure around a reef combining trapezoidal and cubic blocks was simulated numerically under two deployment schemes, showing a more complicated flow structure than that of a stand-alone reef. Relationship between drag coefficient and Reynolds number suggest that the degree of turbulence can be assessed from the value of drag coefficient downstream from the reef. The role of the reef in water flow is to reduce flow velocity and generate turbulence. 相似文献
20.
The present study theoretically as well as experimentally investigates the interaction between waves and an array of porous circular cylinders with or without an inner porous plate based on the linear wave theory.To design more effective floating breakwaters,the transmission rate of waves propagating through the array is evaluated.Each cylinder in the array is partly made of porous materials.Specifically,it possesses a porous sidewall and an impermeable bottom.In addition,an inner porous plate is horizontally fixed inside the cylinders.It dissipates the wave more effectively and eliminates the sloshing phenomenon.The approach suggested by Kagemoto and Yue(1986) is adopted to solve the multiple-scatter problem,while a hierarchical interaction theory is adopted to deal with hydrodynamic interactions among a great number of bodies,which efficiently saves computation time.Meanwhile,a series of model tests with an array of porous cylinders is performed in a wave basin to validate the theoretical work and the calculated results.The draft of the cylinders,the location of the inner porous plate,and the spacing between adjacent cylinders are also adjusted to investigate their effects on wave dissipation. 相似文献