Revisiting the morphological method in two-dimensions to quantify bed-material transport in braided rivers     

Gilles Antoniazza  Maarten Bakker  Stuart N. Lane 《地球表面变化过程与地形》2019,44(11):2251-2267

Research in the 1990s showed that bed-material transport rates could be estimated at the reach scale in both one-dimension and, over small spatial scales (10s of m), in two-dimensions. The limit on the latter was the spatial scale over which it was possible to obtain distributed data on morphological change. Here, we revisit the morphological method given progress in both topographical data acquisition and hydraulic modelling. The bed-material transport needed to conserve mass is calculated in both one and two dimensions for a 1600 m × 300 m Alpine braided river “laboratory”. High-resolution topographical data were acquired by laser scanning to quantify Digital Elevation Models (DEMs), and morphological changes caused by the flushing of the water intake were derived from repeated surveys. Based on DEMs of differences, 1D bed-material transport rates were calculated using the morphological method. Then, a 2D hydraulic model was combined with a topographic correction to route sediment through the network of braided channels and to obtain a spatially variable estimate of transport in both downstream and cross-stream directions. Monte Carlo simulation was applied to the routing model parameters, allowing identification of the most probable parameter values needed to minimize negative transport. The results show that within-section spatial compensation of erosion and deposition using the 1D treatment leads to substantial local errors in transport rate estimates, to a degree related to braiding intensity. Even though the 2D application showed that a large proportion of the total transport was actually concentrated into one main channel during the studied low flow event, the proportion of transport in secondary anabranches is substantial when the river starts braiding. Investigations of the effects of DEM resolution, competent flow duration and survey frequency related to ‘travelling bedload’ and sequential erosion-deposition emphasized the critical importance of careful data collection in the application of the morphological method. © 2019 John Wiley & Sons, Ltd.  相似文献   

Strain analysis of a seismically imaged mass‐transport complex,offshore Uruguay     

Michael J. Steventon  Christopher A.‐L. Jackson  David M. Hodgson  Howard D. Johnson 《Basin Research》2019,31(3):600-620

Strain style, magnitude and distribution within mass‐transport complexes (MTCs) are important for understanding the process evolution of submarine mass flows and for estimating their runout distances. Structural restoration and quantification of strain in gravitationally driven passive margins have been shown to approximately balance between updip extensional and downdip contractional domains; such an exercise has not yet been attempted for MTCs. We here interpret and structurally restore a shallowly buried (c. 1,500 mbsf) and well‐imaged MTC, offshore Uruguay using a high‐resolution (12.5 m vertical and 15 × 12.5 m horizontal resolution) three‐dimensional seismic‐reflection survey. This allows us to characterise and quantify vertical and lateral strain distribution within the deposit. Detailed seismic mapping and attribute analysis shows that the MTC is characterised by a complicated array of kinematic indicators, which vary spatially in style and concentration. Seismic‐attribute extractions reveal several previously undocumented fabrics preserved in the MTC, including internal shearing in the form of sub‐orthogonal shear zones, and fold‐thrust systems within the basal shear zone beneath rafted‐blocks. These features suggest multiple transport directions and phases of flow during emplacement. The MTC is characterised by a broadly tripartite strain distribution, with extensional (e.g. normal faults), translational and contractional (e.g. folds and thrusts) domains, along with a radial frontally emergent zone. We also show how strain is preferentially concentrated around intra‐MTC rafted‐blocks due to their kinematic interactions with the underlying basal shear zone. Overall, and even when volume loss within the frontally emergent zone is included, a strain difference between extension (1.6–1.9 km) and contraction (6.7–7.3 km) is calculated. We attribute this to a combination of distributed, sub‐seismic, ‘cryptic’ strain, likely related to de‐watering, grain‐scale deformation and related changes in bulk sediment volume. This work has implications for assessing MTCs strain distribution and provides a practical approach for evaluating structural interpretations within such deposits.  相似文献   

Two Quasi-periodic Oscillations in ESO 113-G010     

《Chinese Astronomy and Astrophysics》2020,44(1):32-40

  相似文献   

基于垂直剖面函数的天顶对流层延迟插值算法     

徐康  邓兴升 《大地测量与地球动力学》2020,40(1):66-70

通过分析由ERA-Interim气象再分析资料积分方法得到的天顶对流层总延迟随高程变化的规律,提出一种基于垂直剖面函数的天顶对流层延迟(ZTD)插值算法。该算法以ZTD的垂直分布规律为基础,通过垂直剖面函数实现ZTD在高程方向上的精准投影延拓,可以避免因高差较大造成的空间内插结构畸形。采用IGS站提供的高精度对流层产品进行实验验证表明,该算法相对于传统算法能够有效提高ZTD改正值的精度,尤其在高差超过1 km的情况下,相对于反距离加权法精度提升了96%,相对于空间回归法精度提升了79%。  相似文献   

电镀废水改进的CAFE处理工艺设计及案例     

房春生  王殿升  推玥  高晗博  王菊 《吉林大学学报(地球科学版)》2020,50(6):1862-1869

电镀园区废水处理过程中，由于园区企业难以做到彻底的分质分流，导致废水处理出现破络不彻底，次亚磷酸盐、氰化物等出现再络合与难降解等问题，同时，深度处理后，浓水需要进行深度处理，重金属离子浓度、总磷、总氮处理都存在难以达标的情况。本文根据企业电镀废水的典型水质和水量特征，研究设计了改进的CAFE处理工艺，详细论证了各工艺的处理过程、主要设备及相关设计参数，并将该工艺在南通某电镀园区电镀废水处理中进行了实际应用。运行的实践表明，该套设计方案污水处理运行稳定，最终出水的COD_Cr（化学需氧量）、NH₄-N、总铬、六价铬、总镍指标的平均质量浓度分别为34.00、5.41、0.29、0.03、0.05 mg/L，均远远小于电镀废水的排放标准，达到了电镀废水的深度处理要求。  相似文献   

ASO-S卫星工程科学应用系统的数据库设计          下载免费PDF全文

葛蕴翊  黎辉  黄宇  李敬伟  雷仕俊  藏京京  苏杨  封莉  李友平  李瑛  徐遵磊  李翔 《天文学报》2020,61(4):46

先进天基太阳天文台(Advanced Space-based Solar Observatory, ASO-S)卫星是我国首颗太阳观测卫星, 主要观测太阳耀斑和日冕物质抛射以及产生它们的磁场结构. ASO-S卫星的科学应用系统是科学卫星工程的6大系统之一, 它连接科学用户和卫星数据, 为将卫星的科学数据转化为科学成果提供保障. 科学应用系统的数据库是连接软件与海量数据的枢纽, 为科学数据生产和用户服务及运行提供数据层的支撑. 介绍了科学应用系统的数据库架构设计、数据库的选择以及数据库性能优化和表样例. 这里的数据库包括观测计划、工程参数、运维日志、科学数据、定标数据和特征事件识别等数据库. 这些数据库的建设将为ASO-S卫星工程科学应用系统的顺利运行提供数据支撑, 也可以为未来其他科学卫星类似数据库的搭建提供参考和借鉴.  相似文献   

连续台风时期香港区域的水汽变化分析     

周苏娅  闻德保  梅登奎 《大地测量与地球动力学》2020,40(1):82-86

利用香港卫星定位参考站网GNSS观测数据,提取强热带风暴"塔拉斯"与热带风暴"洛克"影响期间各测站天顶方向对流层延迟,反演香港区域大气可降水量;根据香港区域49个天文台气象站提供的实测降雨量数据,分析大气可降水量与实际降雨量的相关性,以及两次台风对香港区域水汽时空分布的不同影响。结果表明,大气可降水量在台风影响前期均上升,在大量降雨后回落,但在连续台风的间歇期间,仍高于台风来临前的水平;水汽累积是大量降雨的前提条件,当水汽累积量相近时,水汽累积时长与累积降雨量呈正相关;台风期间大气可降水量值超过65 mm的区域面积与台风等级相关,台风路径对局部水汽分布有一定的影响。  相似文献   

对雅鲁藏布江结合带形成演化的再探讨     

张鑫全  张振利  王金贵  王硕  杨鑫朋  专少鹏  侯德华  张泽国  张立国  程洲 《中国地质》2020,47(4):944-970

通过1∶5万区域地质调查和收集相关资料的综合研究,本文对雅鲁藏布江结合带的形成演化作了进一步的探讨。雅鲁藏布江特提斯洋具有弧后扩张洋盆的性质,在早三叠世至中三叠世中期洋盆初步形成,中三叠世晚期至晚三叠世洋盆全面形成,从早侏罗世至晚白垩世洋盆逐步萎缩,到古新世至始新世关闭。南带的蛇绿岩主要为洋中脊扩张型(MORB型),形成于中三叠世晚期至晚三叠世。北带的蛇绿岩主要为与洋内俯冲相关的俯冲带上盘型(SSZ型),形成于早中侏罗世。带内侏罗纪至白垩纪其他岩浆岩主要为前弧玄武岩类(FAB型)。显示雅鲁藏布江特提斯洋从早侏罗世开始发生了洋内俯冲,并同步向北向冈底斯带之下主动俯冲消减和向南向喜马拉雅地块之下被动俯冲消减,持续发展到晚白垩世,在古新世至始新世俯冲碰撞消亡转化为结合带。  相似文献   

新疆别也萨麻斯矿区钽锰矿的矿物学特征及其TIMS U-Pb定年     

何晗晗  艾尔肯&#;吐尔孙  王登红  王瑞江  陈振宇 《岩矿测试》2020,39(4):609-619

钽矿是我国的紧缺资源,近年来对别也萨麻斯地区钽矿取得了找矿新进展,包括新矿点的发现以及花岗伟晶岩型稀有金属资源的找矿突破。区内伟晶岩脉广泛发育,为探究含矿脉体的成矿时代、查明区内典型铌钽矿物的矿物学特征,本文以L18号伟晶岩脉中的钽锰矿为研究对象,对其物理性质、化学成分、地质年代等进行了分析。应用电子探针测试钽锰矿的化学组成,热电离质谱法(TIMS)测定其U-Pb年龄,确定含矿脉体的形成年代。结果表明,研究区钽锰矿中Ta_2O_5含量为51.58%～74.80%,均值68.49%,Nb_2O_5含量为6.15%～27.63%;部分主量元素分布不均,未表现出规律的分带性,但矿物颗粒中心部位的CaO含量较边部低,横剖面上SiO_2含量相对稳定,TiO_2与WO_3显示不规律波动。这种特征表明钽锰矿并非单纯由结晶分异作用形成,而是可能受到了后期交代作用的影响。钽锰矿的U-Pb年龄为160Ma,说明钽锰矿化发生于晚侏罗世早期,与围岩海西期二云母花岗岩相差甚远,后者并非L18号脉体的成矿母岩。  相似文献   

四川甲基卡锂矿伟晶岩转石分布区“3定2参”大比例尺填图法及其在青藏高原应用的意义   总被引：4，自引：0，他引：4  

刘善宝  王成辉  王登红  代鸿章  马圣钞  于扬  潘蒙  郝雪峰  杨荣 《地质学报》2020,94(1):326-332

我国西部地区无论是新疆阿尔泰还是地处青藏高原的西昆仑地区或是松潘-甘孜成矿带,都是我国伟晶岩型矿床找矿远景区,但要么剥蚀严重,要么第四系覆盖,难以找到好的地质露头。本文以地处青藏高原东南缘的川西甲基卡矿田为例,通过近10年来的实践,探索出一套在第四系覆盖严重但又有伟晶岩转石分布地区的填图找矿方法--"3定2参"1∶2000伟晶岩转石填图法,即:定伟晶岩转石类型、尺度、密度,参考矿区内伟晶岩脉产状和地形条件。实践证明,该方法能够快速有效识别伟晶岩转石类型(冰碛物、坡积物和原地或半原地型),并可进一步确定第四系覆盖区内伟晶岩脉的类型、产状及规模,为钻探工程部署提供依据。2019年在甲基卡经8个钻孔验证,在日西柯第四系覆盖区内发现16条花岗伟晶岩脉,其中锂辉石伟晶岩脉10条,实现了新的找矿突破。这一方法同样在可尔因矿集区适用,并指导2019年"松潘-甘孜成锂带锂铍多金属大型资源基地综合调查评价"项目在上述两个地区实施钻探验证,初步探获新增氧化锂资源量超过15万吨,值得进一步推广应用。  相似文献