TECTONIC INDICATIONS OF OCCURRENCE OF MODERATE-TO-STRONG EARTHQUAKES IN CHAOHU-TONGLING AREA,ANHUI PROVINCE     

GUO Peng  HAN Zhu-jun  ZHOU Ben-gang  ZHOU Qing  MAO Ze-bin 《地震地质》2018,40(4):832-849

The Chaohu-Tongling area in Anhui Province is a typical moderate-to-strong earthquake active area in the mainland of China. Four earthquakes occurred in this area, displayed as a NNE-trending zonal distribution, including the 1585 M5(3/4) Chaoxian earthquake and the 1654 M5(1/4) Lujiang earthquake, which formed a striking moderate-to-strong seismic activity zone. Field survey, shallow geophysical prospecting, drilling data, collection and dating of chronology samples and comprehensive analysis of fault activity indicate that the Fanshan, Xiajialing and Langcun faults are not active since Quaternary. The NNE-trending Tongling Fault is a buried middle-Pleistocene fault, but it can produce moderate-to-strong earthquakes and control the evolution and development of three en echelon geologic structures. The intensity of the four earthquakes is characterized by southward progressive decrease, which is in accordance with the characteristics that the subsidence range of Wuwei Basin is obviously larger than that of Guichi Basin to its south since late Cenozoic. In terms of deep structure, the characteristics of spatial distribution of Tongling Fault indicate that it corresponds to a NNE-striking Bouguer gravity anomaly gradient belt. So there is a spatial correspondence between the middle-Pleistocene Tongling Fault, the en echelon structures, the differential movement of the neotectonics, the Bouguer gravity anomaly gradient belt and the moderate-to-strong seismic activity belt in the Chaohu-Tongling area, indicating that they should be the tectonic indications of occurrence for moderate-to-strong earthquakes.  相似文献   

汶川M_W7.9地震起始破裂断层几何结构          下载免费PDF全文

宫猛  徐锡伟  李康 《地球物理学报》2020,63(3):1224-1234

本文收集使用紫坪铺水库台网记录到的汶川地震主震P波波形资料,利用P波反投影叠加法获取了2008年5月12日汶川M_W7.9地震起始破裂的时空演化过程.通过分析本次大地震起始破裂阶段(0～1s)破裂点在三维空间内的分布特征,确定了本次大地震起始破裂位置及起始破裂断层几何结构模型.得到以下结果:汶川地震起始破裂点位于31.013±0.002°N、103.392±0.002°E,震源深度为8.2±0.4km,发震时刻为2008年5月12日14∶27∶58.80±0.4.汶川地震起始破裂的最佳断层面走向为NE48°,倾向NW35°,起始阶段破裂的深度范围为地下7.5～9km.  相似文献   

郯庐断裂带肥东北部文集地区构造岩类型与构造变形分析     

袁芳  宋传中  LIN ShouF  石永红  李加好  李振伟  王微  王阳阳 《岩石学报》2020,36(2):601-620

位于郯庐断裂带中南部的肥东地区是郯庐断裂带内韧性剪切带出露的主体区域之一。本文从肥东北部文集地区的构造岩组成及其变形入手,通过详细的野外观测、室内显微构造变形分析来确定该地区构造变形的几何学形态及其涡度、有限应变、分维度、差异应力、应变速率等参数。研究区主要出露角闪岩相肥东变质杂岩,构造岩以糜棱岩和糜棱岩化片麻岩为主,岩石变形强烈。根据极摩尔圆法得到的运动学涡度值为0.729~0.870,指示区域内的韧性剪切活动以简单剪切为主。几何学形态上,肥东北部文集地区构造整体呈一背形展出,其枢纽走向NE-SW,轴面倾向SE,物质及变形强度等方面均表现出一定的规律和对称性。研究区内动态重结晶石英颗粒边界具有统计学上的自相似性,其分维值D在1.143~1.208之间,且自背形核部向两翼,颗粒粒径增大,分维值减小。差异应力Δσ介于17.86~55.18MPa之间,应变速率ε值在1.960×10^-13~7.330×10^-12s^-1之间,且背形核部差异应力和应变速率较两翼大,呈近似对称性分布。通过对比以上构造参数可以发现,区内差异应力和应变速率表现出一定的正相关性,自核部向两翼二者均呈减小趋势;动态重结晶石英颗粒则与应变速率呈负相关性,即核部颗粒细小、两翼增大。本文从几何学、运动学以及显微构造变形分析等方面对该区构造变形展开精细化研究,借此来分析肥东北部地区郯庐断裂带的构造形态和运动学特征,这对进一步认识郯庐断裂带的演化过程及构造模型的建立有着重要的意义。  相似文献   

云南中甸-大具断裂上新发现的地震地表破裂带   总被引：1，自引：0，他引：1  

程理  苏刚  李光涛  尹功明  吴昊  余建强 《震灾防御技术》2019,14(4):797-809

中甸-大具断裂是川滇菱形块体的西南边界，总体走向310°—320°。近年来我们对该断裂进行了1:50000条带状地质填图，发现了断裂活动的地质地貌证据。其中，在丽江大具盆地内（金沙江右岸）沿断裂新发现一处典型地震地表破裂带，长约600m，宽120m左右，主要表现为地表挤压鼓包、挤压垄脊、张裂缝、挤压阶区等，呈NW走向，与中甸-大具断裂走向基本一致。野外工作中，我们详细记录和测量了地表破裂的破裂样式、破裂规模和相关定量数据，利用旋翼无人机测绘了地表破裂带的形态和展布，获得了高精度DEM，分析了地表破裂表现出的运动性质。在已有资料的基础上讨论了地表破裂的形成时代、归属、震级大小，简要分析了其发震断层。新地震地表破裂带的发现为进一步研究中甸-大具断裂活动特征、古地震及地震危险性提供了基础资料。  相似文献   

鲜水河断裂带乾宁段岩石特征与内部结构及其物理-化学性质     

吴琼  李海兵  CHEVALIER Marie-Luce  米桂龙  李超  何祥丽  李亚林 《岩石学报》2021,37(10):3204-3224

断裂带的变形行为和断层滑移机制是目前地震研究关注的热点,断裂带岩石特征、内部结构与物理化学性质是确定断层蠕滑或粘滑行为以及断层滑移机制的基础和关键。本文以鲜水河断裂带乾宁段地表出露的断裂岩为研究对象,通过野外地质调查、室内光学显微镜、扫描电镜、粒度统计、粉末X射线衍射分析（XRD）和薄片X射线荧光光谱分析（XRF）等多种研究方法,对鲜水河断裂带岩石特征、结构构造、物性、矿物成分及化学元素分布开展了详细的分析,并探讨了相关变形行为和滑移机制。分析表明：（1）断裂带核部主要由黑色断层泥、浅黄色及黄色断层角砾岩和灰色碎裂岩、灰色断层角砾岩组成,呈单核对称结构;（2）黑色断层泥厚3~5cm,具有快速滑动结构特征,表现为断层粘滑行为。断层泥可划分出13个滑移带,最窄滑移带厚约40μm,至少代表13期古地震事件;（3）断层泥主要由伊利石、高岭石和石英等矿物组成,其中边部伊蒙混层含量异常高,为最新一次古地震的主滑移带。由于伊利石和伊蒙混层（或蒙脱石）为主要黏土矿物的断层泥渗透率低、孔隙流体压力大,以及发现断层泥楔入脉,表明地震过程中断层滑动存在热增压弱化机制;（4）从断层泥不同滑动带中碎块蚀变程度和矿物分布特征来看,地震主滑动带有向碎裂岩方向迁移的趋势。推测断层在滑动过程中,更趋向于向弱矿物含量高（如伊利石、伊蒙混层）、强矿物含量低（如方解石、高岭石）的围岩一侧迁移。  相似文献   

红河断裂带类微生物状纳米颗粒的发现及其构造意义     

蔡周荣  卢丽娟  黄强太  李建峰  肖阳  杨鹏  陆杏欣  张程  黎雨晗 《大地构造与成矿学》2021,45(2):270-279

通过扫描电镜(SEM)观察,首次在红河断裂带内的花岗糜棱岩中发现类微生物状纳米颗粒。高分辨率平插能谱分析结果表明,该类微生物状纳米颗粒成分中的C元素平均含量约为10%,指示无机成因,并非某些菌类微生物,结合XRD分析结果表明该类纳米颗粒成分来自花岗糜棱岩的造岩矿物。通过对各种形貌特征的纳米颗粒观察、筛查和规律分析,探讨了类微生物状纳米颗粒的形成机理及构造意义,认为其形成过程可以分为岩石破裂形成球粒状纳米颗粒、球粒状纳米颗粒粘聚形成片状、片状纳米颗粒卷曲成管状以及管状纳米颗粒脱落聚集四个阶段,其中后三个阶段为纳米颗粒的后生构造变形阶段,指示红河断裂带构造环境的多期次变化。断裂带内球粒状纳米颗粒可能是在宏观构造应力场作用下的最小变形产物,其结构或变形特征蕴含丰富的宏观构造活动信息,是传统构造地质学研究方法之外的新思路和新手段。  相似文献   

Research achievements of the Qinghai-Tibet Plateau based on 60 years of aeromagnetic surveys     

《China Geology》2021,4(1):147-177

The Qinghai-Tibet Plateau (also referred to as the Plateau) has long received much attention from the community of geoscience due to its unique geographical location and rich mineral resources. This paper reviews the aeromagnetic surveys in the Plateau in the past 60 years and summarizes relevant research achievements, which mainly include the followings. (1) The boundaries between the Plateau and its surrounding regions have been clarified. In detail, its western boundary is restricted by West Kunlun-Altyn Tagh arc-shaped magnetic anomaly zone forming due to the arc-shaped connection of the Altyn Tagh and Kangxiwa faults and its eastern boundary consists of the boundaries among different magnetic fields along the Longnan (Wudu)-Kangding Fault. Meanwhile, the fault on the northern margin of the Northern Qilian Mountains serves as its northern boundary. (2) The Plateau is mainly composed of four orogens that were stitched together, namely East Kunlun-Qilian, Hoh-Xil-Songpan, Chamdo-Southwestern Sanjiang (Nujiang, Lancang, and Jinsha rivers in southeastern China), and Gangdese-Himalaya orogens. (3) The basement of the Plateau is dominated by weakly magnetic Proterozoic metamorphic rocks and lacks strongly magnetic Archean crystalline basement of stable continents such as the Tarim and Sichuan blocks. Therefore, it exhibits the characteristics of unstable orogenic basement. (4) The Yarlung-Zangbo suture zone forming due to continent-continent collisions since the Cenozoic shows double aeromagnetic anomaly zones. Therefore, it can be inferred that the Yarlung-Zangbo suture zone formed from the Indian Plate subducting towards and colliding with the Eurasian Plate twice. (5) A huge negative aeromagnetic anomaly in nearly SN trending has been discovered in the middle part of the Plateau, indicating a giant deep thermal-tectonic zone. (6) A dual-layer magnetic structure has been revealed in the Plateau. It consists of shallow magnetic anomaly zones in nearly EW and NW trending and deep magnetic anomaly zones in nearly SN trending. They overlap vertically and cross horizontally, showing the flyover-type geological structure of the Plateau. (7) A group of NW-trending faults occur in eastern Tibet, which is intersected rather than connected by the nearly EW trending that develop in middle-west Tibet. (8) As for the central uplift zone that occurs through the Qiangtang Basin, its metamorphic basement tends to gradually descend from west to east, showing the form of steps. The Qiangtang Basin is divided into the northern and southern part by the central uplift zone in it. The basement in the Qiangtang Basin is deep in the north and west and shallow in the south and west. The basement in the northern Qiangtang Basin is deep and relatively stable and thus is more favorable for the generation and preservation of oil and gas. Up to now, 19 favorable tectonic regions of oil and gas have been determined in the Qiangtang Basin. (9) A total of 21 prospecting areas of mineral resources have been delineated and thousands of ore-bearing (or mineralization) anomalies have been discovered. Additionally, the formation and uplift mechanism of the Plateau are briefly discussed in this paper.©2021 China Geology Editorial Office.  相似文献   

Evidence of multi-stage faulting by clay mineral analysis: Example in a normal fault zone affecting arkosic sandstones (Annot sandstones)     

《Journal of Structural Geology》2015

Fault affecting silicoclastic sediments are commonly enriched in clay minerals. Clays are sensitive to fluid–rock interactions and deformation mechanisms; in this paper, they are used as proxy for fault activity and behavior. The present study focuses on clay mineral assemblages from the Point Vert normal fault zone located in the Annot sandstones, a Priabonian-Rupelian turbidite succession of the Alpine foredeep in SE France. In this area, the Annot sandstones were buried around 6–8 km below the front of Alpine nappes soon after their deposition and exhumed during the middle-late Miocene. The fault affects arkosic sandstone beds alternating with pelitic layers, and displays throw of about thirty meters. The fault core zone comprises intensely foliated sandstones bounding a corridor of gouge about 20 cm thick. The foliated sandstones display clay concentration along S–C structures characterized by dissolution of K-feldspar and their replacement by mica, associated with quartz pressure solution, intense microfracturation and quartz vein precipitation. The gouge is formed by a clayey matrix containing fragments of foliated sandstones and pelites. However, a detailed petrographical investigation suggests complex polyphase deformation processes. Optical and SEM observations show that the clay minerals fraction of all studied rocks (pelites and sandstones from the damage and core zones of the fault) is dominated by white micas and chlorite. These minerals have two different origins: detrital and newly-formed. Detrital micas are identified by their larger shape and their chemical composition with a lower Fe–Mg content than the newly-formed white micas. In the foliated sandstones, newly-formed white micas are concentrated along S–C structures or replace K-feldspar. Both types of newly formed micas display the same chemical composition confirmed microstructural observations suggesting that they formed in the same conditions. They have the following structural formulas: Na_0.05 K_0.86 (Al _1.77 Fe_0.08 Mg_0.15) (Si_3.22 Al_0.78) O₁₀ (OH)_2. They are enriched in Fe and Mg compared to the detrital micas. Newly-formed chlorites are associated with micas along the shear planes. According to microprobe analyses, they present the following structural formula: (Al_1,48 Fe_2,50 Mg_1,84) (Si_2,82 Al_1,18) O₁₀ (OH)₈. All these data suggest that these clay minerals are synkinematic and registered the fault activity. In the gouge samples, illite and chlorite are the major clay minerals; smectite is locally present in some samples.In the foliated sandstones, Kubler Index (KI) ((001) XRD peak width at half height) data and thermodynamic calculations from synkinematic chlorite chemistry suggest that the main fault deformation occurred under temperatures around 220 °C (diagenesis to anchizone boundary). KI measured on pelites and sandstones from the hanging and footwall, display similar values coherent with the maximal burial temperature of the Annot sandstones in this area. The gouge samples have a higher KI index, which could be explained by a reactivation of the fault at lower temperatures during the exhumation of the Annot sandstones formation.  相似文献   

Polygonal deformation bands     

《Journal of Structural Geology》2015

We report for the first time the occurrence of polygonal faults in sandstone, which is compelling given that layer-bound polygonal fault systems have been observed so far only in fine-grained sediments such as clay and chalk. The polygonal faults are shear deformation bands that developed under shallow burial conditions via strain hardening in dm-wide zones. The edges of the polygons are 1–5 m long. The shear deformation bands are organized as conjugate faults along each edge of the polygon and form characteristic horst-like structures. The individual deformation bands have slip magnitudes ranging from a few mm to 1.5 cm; the cumulative average slip magnitude in a zone is up to 10 cm. The deformation bands heaves, in aggregate form, accommodate a small isotropic horizontal extension (strain <0.005). The individual shear deformation bands show abutting T-junctions, veering, curving, and merging where they mechanically interact. Crosscutting relationships are rare. The interactions of the deformation bands are similar to those of mode I opening fractures. The documented fault networks have important implications for evaluating the geometry of km-scale polygonal fault systems in the subsurface, top seal integrity, as well as constraining paleo-tectonic stress regimes.  相似文献   

Structural style in a young flexure-induced oblique extensional system,north-western Bonaparte Basin,Australia     

《Journal of Structural Geology》2015

In the north-western Bonaparte Basin (North West Shelf of Australia) Neogene to Recent flexure-induced extension superimposed obliquely over the Mesozoic rift structures. Thus, the area offers a good opportunity to investigate the dynamics and architecture of oblique extension fault systems. Analysis of basin-scale 2D and 3D seismic data along the Vulcan sub-basin shows that Neogene deformation produced a new set of extensional, en échelon faults, at places accompanied by the reactivation of the Mesozoic faults. The pre-existing Mesozoic structures strongly control the distribution of the Neogene-Recent deformation, both at regional and local scales. Main controls on the Neogene-Recent fault style, density and segmentation/linkage include: (1) the orientation of the underlying Mesozoic structures, (2) the obliqueness of the younger extension relative to the rift-inherited faults, and (3) the proximity to the Timor Trough. Three types of vertical relationships have been observed between Mesozoic and Neogene-Recent faults. Hard linkages seems to develop when both fault systems trend parallel, therefore increasing risks for trap integrity. It is suggested that the orientation of maximum horizontal stress (S_Hmax) relative to the Mesozoic faults, forming hydrocarbon traps, is critical for their potential seal/leak behaviour. Stratigraphic growth across the faults indicates that main fault activity occurred during the Plio-Pleistocene, which corresponds to the timing of tectonic loading on Timor Island and the development of lithospheric flexure. Synchronism of normal faulting with flexural bending suggests that extensional deformation on the descending Australian margin accompanied the formation of the Timor Trough.  相似文献