Mooring optimization of floating platforms using a genetic algorithm   总被引：1，自引：0，他引：1  

Mehdi Shafieefar  Aidin Rezvani 《Ocean Engineering》2007,34(10):1413-1421

This paper presents a new procedure for the optimization of the mooring design of floating platforms, in which an automatic design sequence is also established. Regarding the optimization philosophy, the following aspects are dealt with:

• The optimization of the platform heading and its mooring pattern, taking into account the environmental force spreading;

• optimum line length or line tension for each mooring line, associated to the optimization of the mooring line materials and sizes.

Basically, the main goal of this paper is to introduce a new method, which will provide the quickest way to find the best mooring system, defined here as that which minimizes platform responses.A genetic algorithm (GA) is applied in this contribution, and this paper describes exactly the procedure of developing a GA code directed toward the solution of mooring design optimization problems. In order to prove the efficiency and the vast potential of the proposed algorithm as a design tool, sample moorings are analyzed for different environmental conditions and the final results, including the time required to run them, are presented.  相似文献   

琼胶降解菌F-6筛选、培养条件及对条斑紫菜(Porphyra yezoensis)细胞解离作用的研究          下载免费PDF全文

付万冬  韩宝芹  王常红  刘万顺 《海洋与湖沼》2007,38(4):343-350

利用琼胶作为唯一的碳源从青岛太平角海域的海水和红藻样品中筛选分离得到一株高产琼胶酶的海洋菌F-6,对其最适的产酶条件,利用琼胶酶分离条斑紫菜的原生质体和原生质体的培养进行研究。结果表明,通过单次单因子和正交实验确定琼胶降解菌株F-6最适产酶培养基配方为(W/V):琼胶0.7%;酵母粉0.3%;蛋白胨0.5%;NaCl2.0%;K2HPO40.1%;CaCl20.02%;MgSO4·7H2O0.05%;FeSO4·7H2O0.002%;起始pH=7.5,最适的发酵产酶条件为:26℃培养36h。经条件优化后,粗酶液的酶活高达631.6U/ml。发酵液经过6000g离心30min得到粗酶液,粗酶液经过8k分离膜超滤,加入1mol/L渗透剂,0.22μm滤膜过滤除菌后降解条斑紫菜组织块,成功地分离得到大量的紫菜原生质体,其产率为3×106个原生质体/g新鲜紫菜组织。原生质体经初步培养发育成愈伤组织,其成活率为60%。  相似文献   

基于粒子群算法的浮筒配置优化问题的研究   总被引：1，自引：0，他引：1  

张勇德  黄莎白 《海洋技术学报》2004,23(2):58-63

针对传统的验证法在解决浮筒配置问题中存在的计算量大、计算时间长、工作重复性强等缺点，提出了一种将浮筒纵向位置配置和浮筒充气量综合考虑、一体优化的方法。文章将各种合理性校验准则作为约束条件，通过逼近沉艇起浮瞬间和浮起后的平衡状态，来求取各对浮筒的纵向位置和充气量，将浮筒配置问题转换为一个多目标、多约束的最优化问题。在此基础上，根据粒子群优化算法的特点，提出了一种双向搜索策略，来求解浮筒配置优化问题。这种方法简单实用，计算时间短，无需人工干预，算法运行一次可获得多组配置方案供决策人员选择。算例表明用这种方法来解决浮筒配置问题是可行的、有效的。  相似文献   

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls     

Cho-Chung Liang  Hung-Wen Chen  Chan-Yung Jen 《Ocean Engineering》2003,30(15):1941-1967

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.  相似文献   

Regeneration of sand waves after dredging   总被引：2，自引：0，他引：2  

M. A. F. Knaapen  S. J. M. H. Hulscher 《Coastal Engineering》2002,46(4):1096

Sand waves are large bed waves on the seabed, being a few metres high and lying hundreds of metres apart. In some cases, these sand waves occur in navigation channels. If these sand waves reduce the water depth to an unacceptable level and hinder navigation, they need to be dredged. It has been observed in the Bisanseto Channel in Japan that the sand waves tend to regain their shape after dredging. In this paper, we address modelling of this regeneration of sand waves, aiming to predict this process. For this purpose, we combine a very simple, yet effective, amplitude-evolution model based on the Landau equation, with measurements in the Bisanseto Channel. The model parameters are tuned to the measured data using a genetic algorithm, a stochastic optimization routine. The results are good. The tuned model accurately reproduces the measured growth of the sand waves. The differences between the measured weave heights and the model results are smaller than the measurement noise. Furthermore, the resulting parameters are surprisingly consistent, given the large variations in the sediment characteristics, the water depth and the flow field. This approach was tested on its predictive capacity using a synthetic test case. The model was tuned based on constructed predredging data and the amplitude evolution as measured for over 2 years. After tuning, the predictions were accurate for about 10 years. Thus, it is shown that the approach could be a useful tool in the optimization of dredging strategies in case of dredging of sand waves.  相似文献   

Hydrodynamic optimization of ship hull forms     

Scott Percival  Dane Hendrix  Francis Noblesse   《Applied Ocean Research》2001,23(6):1429

An extremely simple CFD tool is used to compare the calm-water drags of a series of hull forms and to define ‘optimized’ monohull ships for which the total (friction+wave) calm-water drag is minimized. The friction drag is estimated using the classical ITTC formula. The wave drag is predicted using the zeroth-order slender-ship approximation. Comparisons of theoretical predictions and experimental measurements for a series of eight hull forms show that—despite the extreme simplicity of the method that is used here to estimate the friction drag and the wave drag—the method is able to rank the drags of a series of hull forms roughly in accordance with experimental measurements. Thus, the method may be used, with appropriate caution, as a practical hull form design and optimization tool. For purposes of illustration, optimized hull forms that have the same displacement and waterplane transverse moment of inertia as the classical Wigley hull, taken as initial hull in the optimization process, are determined for three speeds and for a speed range.  相似文献   

热稳定κ-卡拉胶酶产生菌Bacillus sp. Car19的发酵条件优化     

谢买胜  李江  林学政  何培青 《海洋科学》2016,40(11):7-16

对一株分泌热稳定κ-卡拉胶酶印尼热泉菌进行了种属鉴定, 并采用响应面法对该菌发酵产酶条件进行了优化。鉴定结果表明, 该菌株属于芽孢杆菌属(Bacillus), 命名为Bacillus sp. Car19(GeneBank: KT865196)。发酵条件优化结果显示, 9个环境因子影响Bacillus sp. Car19产酶量。其中影响Bacillus sp. Car19产酶量的三个主要因素分别为培养温度、培养基中Cu²⁺浓度和培养基中NaCl浓度。综合次要因素对Bacillus sp. Car19产酶影响, Bacillus sp. Car19最佳产酶发酵条件为: 培养温度52.31℃、Cu²⁺浓度6.93 mmol/L、NaCl浓度37.03 g/L, 培养基pH为6, 接种量1%, 培养时间36h, 半乳糖浓度0.3 g/L,硝酸铵浓度7g/L, 卡拉胶浓度0.5g/L。优化后发酵上清液酶活力达到15.21 U/mL, 与优化前相比提高了1.5 倍。  相似文献   

SHORT COMMUNICATION APPLICATION OF THE POWELL METHOD TO THE OPTIMIZATION OF FLOW INJECTION SYSTEMS     

M.DELVALLE  J.ALONSO  M.POCH  J.BARTROLí 《地理学报(英文版)》1988,(Z1)

This paper describes the application of the Powell algorithm to the optimization of a flow injectionsystem configuration.The performance of this algorithm has been compared with the modified simplexmethod.The system studied is the determination of ammonia,based on the indophenol blue reaction.Alinear combination of sensitivity and sample throughput is used as the objective function because of itssimultaneous optimization capability.Results obtained show that the proposed method may reach theoptimal conditions with a lower number of experimental evaluations.  相似文献   

MULTIVARIATE RESPONSE SURFACE MODELLING BY PRINCIPAL COMPONENTS ANALYSIS     

N.BRATCHELL 《地理学报(英文版)》1989,(3)

Analysis of multivariate response data by modelling the principal components of the response has beenapplied to two sets of data. In both cases principal components analysis revealed the relationships amongthe response variables and exploited them to simplify the problem of modelling and optimizing themultivariate response. The models and optima obtained from the principal components comparedfavourably with the individual models and simultaneous optima.  相似文献   

大型地下洞室不同开挖效应的动态仿真分析   总被引：3，自引：0，他引：3  

于德海  彭建兵 《地质与勘探》2005,41(2):93-96

针对云南锡业集团公司个旧锡矿地下采场洞室的开挖技术条件,采用非线性三维有限元法,对其动态开挖过程进行了仿真模拟分析,并优化选择了地下采场洞室的开挖顺序.结果表明,不同的开挖顺序,对围岩的稳定性具有显著的影响.  相似文献