Implications of the saltation–abrasion bedrock incision model for steady‐state river longitudinal profile relief and concavity     

Leonard S. Sklar  William E. Dietrich 《地球表面变化过程与地形》2008,33(7):1129-1151

The saltation–abrasion model predicts rates of river incision into bedrock as an explicit function of sediment supply, grain size, boundary shear stress and rock strength. Here we use this experimentally calibrated model to explore the controls on river longitudinal profile concavity and relief for the simple but illustrative case of steady‐state topography. Over a wide range of rock uplift rates we find a characteristic downstream trend, in which upstream reaches are close to the threshold of sediment motion with large extents of bedrock exposure in the channel bed, while downstream reaches have higher excess shear stresses and lesser extents of bedrock exposure. Profile concavity is most sensitive to spatial gradients in runoff and the rate of downstream sediment fining. Concavity is also sensitive to the supply rate of coarse sediment, which varies with rock uplift rate and with the fraction of the total sediment load in the bedload size class. Variations in rock strength have little influence on profile concavity. Profile relief is most sensitive to grain size and amount of runoff. Rock uplift rate and rock strength influence relief most strongly for high rates of rock uplift. Analysis of potential covariation of grain size with rock uplift rate and rock strength suggests that the influence of these variables on profile form could occur in large part through their influence on grain size. Similarly, covariation between grain size and the fraction of sediment load in the bedload size class provides another indirect avenue for rock uplift and strength to influence profile form. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Physical sedimentology experiments with sulfuric acid solutions: Implications for Mars?     

Kathleen C. Benison  Deidre LaClair  Jessica Walker   《Earth and Planetary Science Letters》2008,270(3-4):330-337

Physical sedimentology experiments have shown that sulfuric acid solutions may have formed some surface features seen on Mars. Recent data returned from Mars show the presence of jarosite, sulfate salts, hematite, phyllosilicates, and opaline silica, all of which precipitate from some terrestrial sulfuric acid solutions. There is a plethora of geochemical, mineralogical, and sedimentological data indicative of past sulfuric acid systems on Mars, but there has never been a comprehensive study published regarding sulfuric acid as a physical sedimentological agent. In the laboratory, we ran liquids of various compositions over sediments in order to test how these liquids entrain, transport, and deposit sediments. Pure water and concentrated sulfuric acid solutions produced the same general features, such as channels, gullies, and alluvial fans. However, sulfuric acid solutions yielded some distinct sedimentary features not produced by pure water runs. These features, narrow, deeply incised channels of consistent widths, rounded discrete fans, and air bubble “craters”, are similar to some Martian landscape features. These experimental results indicate that acid solutions should be considered a possible sedimentological agent on Mars.  相似文献   

信息渠道对城市居民迁居空间的影响——以南京为例     

秦萧  甄峰 《地理研究》2016,35(10):1846-1856

根据搜寻空间理论,网络渠道能够提供比传统渠道更多的住房信息,减少居民迁居过程中对原住房周边区域的依赖,从而扩大了居民迁居的搜寻范围。但是,与远程办公和住房选择关系的研究相比,学者较少关注网络渠道对居民实际迁居空间的影响。基于南京城区居民迁居活动调查数据,利用三维核密度和多项式逻辑回归模型,重点分析不同信息渠道使用者的迁居时空特征、信息渠道对使用者迁居空间的影响。研究发现,近年来网络渠道已经成为居民迁居过程中的主导住房信息获取方式,其使用者的迁居距离大于传统渠道使用者,丰富了现有关于ICT对居民迁居空间影响的学术研究,也为城市住房信息管理和住房空间规划提供借鉴。  相似文献   

Solution of the propagation of the waves in open channels by the transfer matrix method     

R. Daneshfaraz  B. Kaya   《Ocean Engineering》2008,35(11-12):1075-1079

Many problems in mechanics can be solved by the use of the transfer matrix method. The use of this method in hydraulics engineering is not widespread and only limited studies are available. In this study, linearized St. Venant equations were used and the use of transfer matrix in ocean engineering was investigated for long waves in open channels, and numerical application was carried out. The results obtained through the transfer matrix method, which is quite easy to use, program and comprehend, showed similar results obtained from the characteristics method and finite differences method.  相似文献   

Reflected and transmitted waves in a channel with side porous mattresses     

Wojciech Sulisz 《Coastal Engineering》2008

The problem of wave propagation and wave damping in a channel with side porous mattresses of arbitrary shape protruding from the walls is studied. The solution was achieved by applying 3-D boundary element method and was employed to study wave field in the channel and to analyze the effect of the geometry of the mattresses and physical and hydraulic properties of porous material on wave damping. The results show that wave damping in the channel strongly depends on wave parameters, especially, on the wave number. Wave reflection and transmission decrease with increasing the wave number. The results also show that the wave field in the channel strongly depends on the geometry of the mattresses as well as on physical and hydraulic properties of porous material used to build these wave dampers. The geometry of the mattresses and physical and hydraulic properties of porous material have a moderate effect on wave reflection and a significant effect on wave transmission. The results show that wave transmission down the channel decreases with increasing the length and thickness of the mattresses. Moreover, wave transmission decreases with increasing the porosity and damping properties of porous media used to build the mattresses. The analysis shows that porous mattresses protruding from the channel walls are very efficient in damping water waves propagating down the channel and may be built in channels to reduce high waves and achieve desired wave conditions. Theoretical results are in reasonable agreement with experimental data.  相似文献   

Measuring channel and gully cross-sections with an airborne laser altimeter     

Jerry C. Ritchie  Earl H. Grissinger  Joseph B. Murphey  Jurgen D. Garbrecht 《水文研究》1994,8(3):237-243

A laser altimeter, making 4000 measurements per second, was used to measure channel and gully morphology. The laser measurements provide quick, accurate and readily obtained data on the cross-section and morphology of channels and gullies in relation to the adjacent landscape. Although ground based techniques can be used to make these measurements, using a laser altimeter mounted in an aircraft allows data to be collected faster, with greater density and detail, and in areas with limited access for ground surveys. The laser altimeter data are valuable for measuring channel and gully cross-sections and roughness in relation to the surrounding landscape, for assessing soil loss from gullies and channels, and for providing input to the understanding of gully and channel dynamics in the landscape.  相似文献   

Short‐term spatial and temporal patterns of suspended sediment transfer in proglacial channels,small River Glacier,Canada     

John F. Orwin  C. C. Smart 《水文研究》2004,18(9):1521-1542

Alpine glacial basins are a significant source and storage area for sediment exposed by glacial retreat. Recent research has indicated that short‐term storage and release of sediment in proglacial channels may control the pattern of suspended sediment transfer from these basins. Custom‐built continuously recording turbidimeters installed on a network of nine gauging sites were used to characterize spatial and temporal variability in suspended sediment transfer patterns for the entire proglacial area at Small River Glacier, British Columbia, Canada. Discharge and suspended sediment concentration were measured at 5 min intervals over the ablation season of 2000. Differences in suspended sediment transfer patterns were then extracted using multivariate statistics (principal component and cluster analysis). Results showed that each gauging station was dominated c. 80% of days by diurnal sediment transfer patterns and ‘low’ suspended sediment concentrations. ‘Irregular’ transfer patterns were generally associated with ‘high’ sediment concentrations during snowmelt and rainfall events, resulting in the transfer of up to 70% of the total seasonal suspended sediment load at some gauging stations. Suspended sediment enrichment of up to 600% from channel storage release and extrachannel inputs occurred between the glacial front and distal proglacial boundary. However, these patterns differed significantly between gauging stations as determined by the location of the gauging station within the catchment and meteorological conditions. Overall, the proglacial area was the source for up to 80% of the total suspended sediment yield transferred from the Small River Glacier basin. These results confirmed that sediment stored and released in the proglacial area, in particular from proglacial channels, was controlling suspended sediment transfer patterns. To characterize this control accurately requires multiple gauging stations with high frequency monitoring of suspended sediment concentration. Accurate characterization of this proglacial control on suspended sediment transfer may therefore aid interpretation of suspended sediment yield patterns from glacierized basins. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

河口涨落潮槽水动力特征及河槽类型判定   总被引：4，自引：0，他引：4  

刘高峰  沈焕庭  吴加学  吴华林 《海洋学报》2005,27(5):151-156

在前人对河口冲刷槽研究的基础上,选择长江口南支、新桥水道、南小泓和南港主槽作为典型涨、落潮槽研究对象,以2001年洪季和2003年枯季实测资料为根据,比较分析了长江口涨落潮槽的水流、泥沙、优势流和优势沙等动力特征,结果表明用单一因子分析河槽性质不够全面.提出了一个(无量纲因子)河槽类型系数(λ)来综合表述河槽的多种水文泥沙特征,可以较全面地用多个影响因子来合理地判断河槽类型.  相似文献   

黄河三角洲桩西101站潮沟地貌形态及其水动力学研究   总被引：6，自引：1，他引：6  

尹延鸿  成国栋  范顺庭  王玉荣  朱兰部 《海洋科学》1997,21(5):46-49

在潮沟下游，横跨且生趣与潮沟的横断面设了５个观测站，进行了２４ｈ的水动力测量。结果表明，涨落潮流速流向不对称，在潮沟内，涨落潮流流速差别很大，涨潮流流速最大为９ｃｍ／２，而落潮流流速最大可达３８ｃｍ／ｓ。据推测，潮沟内之所以落潮流流速明显大于涨潮流流速，可能是由于潮沟与岸线斜交有关。  相似文献   

The Equatorial Atlantic Mid-Ocean Channel: An Ultra High-Resolution Image of Its Burial History Based on TOPAS Profiles     

Baraza  J.  Ercilla  G.  Farrán  M.  Casamor  J. L.  Sorribas  J.  Flores  J. A.  Sierro  F.  Wersteeg  W. 《Marine Geophysical Researches》1997,19(2):115-135

Multibeam bathymetric and ultra high-resolution seismic data reveal that the distal course of the Equatorial Atlantic Mid-Ocean Channel (EAMOC) extends further east and south than was previously known, and is controlled by the presence of morphologic highs related to the Fernando de Noronha Fracture Zone. Distal course of the EAMOC is buried by sediments, and does not have bathymetric expression on the seafloor. The channel fill consists of three seismic sequences, suggesting that the recent geological evolution of the channel is composed of successive phases of decreasing sedimentary activity that finally resulted in its complete burial. Tectonic and volcanic activity related to the Fernando de Noronha Fracture Zone and Ridge, together with the effect of strong pulses of the Antarctic bottom water current during the upper Pliocene are suggested to have contributed to the progressive burial and the final abandonment of the EAMOC.  相似文献