Application of the DDM and fracture mechanics model on the simulation of rock breakage by mechanical tools   总被引：2，自引：0，他引：2  

X.C. Tan  S.Q. Kou  P.-A. Lindqvist 《Engineering Geology》1998,49(3-4):277-284

A DDM (displacement discontinuity method) program coupled with a modified energy criterion is used to simulate the development of cracks and chips by indentation tools. In our analysis a cavity model is applied to represent the expansion of crushed rock to the surrounding rock and the cracks are formedin two-dimensional and quasi-static conditions. The model parameters, rock properties and load magnitudes are varied in the numerical calculations. The results show that chips are formed by multiple mechanisms of either tension or shear, or their combinations. The cracks may either propagate to the free surface to form chips or rest in the rock subsurface. The crack development is dependent upon rock and fracture properties, loading force and tool characteristics. The DDM is a convenient tool in the study of rock fragmentation and cracks.  相似文献   

组合切削具产生的预破碎区对钻进效果的影响          下载免费PDF全文

鄢泰宁  段隆臣  Р.К.波格丹诺夫  И.А.斯维什尼科夫 《探矿工程》2010,37(12):5-8

从组合切削具将在岩石中产生预破碎区的论点出发,通过实验定量研究了预破碎区深度与掏槽刃切入深度的关系,得出了预破碎区有利于降低岩石强度及岩石破碎能耗的结论,并用生产试验结果进行了验证。提出了孕镶金刚石钻头钻进Ⅶ～Ⅷ级硬岩时仍存在预破碎区和切削、微切削破岩方式,以及预破碎区并非越大越好的学术观点。  相似文献   

洛南任家滩-荞麦山正长斑岩成因及其对古元古代晚期裂解的指示--岩石化学及锆石U-Pb年龄和Lu-Hf同位素特征     

李毅  李佐臣  赵端昌  赵鹏彬  吕军利  张亚峰 《地质论评》2023,69(5):2023050005-2023050005

华北克拉通南缘的陕西洛南-河南豫西地区出露一系列形成于1.8~1.6Ga的碱性岩,对这些碱性岩的研究有助于提高对华北克拉通南缘古元古代构造环境的认识。本文选取陕西省洛南县任家滩-荞麦山一带碱性侵入体进行系统的岩石学、LA-ICP-MS锆石U-Pb年代学、Lu-Hf同位素分析和岩石地球化学研究,讨论了其成因机制和构造背景。研究表明,任家滩-荞麦山岩体的主体岩性为正长斑岩,加权平均年龄为1689±20Ma（MSWD=0.12）,表明其侵位时代为古元古代。该岩体富碱（Na2O+K2O=7.95% ~ 9.5%）,高钾（K2O=4.67% ~ 8.51%）;稀土元素总量较高（496.15×10-6 ~ 650.16×10-6,平均543.06×10-6）,轻、重稀土元素分馏比较明显,轻稀土元素相对富集（LREE=454×10-6 ~ 605×10-6）,重稀土元素亏损（HREE=39.3×10-6 ~ 45.6×10-6）,具有弱负铕异常;K、Rb、Ba、Th富集,Nb、Ta、P、Ti亏损,并且具有明显的Sr负异常。εHf（t）值<0,TDM1值为2038 ~ 2218Ma,TDM2值为2250 ~ 2516Ma,说明岩浆源区物质与富集地幔有关或受到过地壳物质的混染。因此,任家滩-荞麦山岩体是由地幔玄武质岩浆与地壳基底太华杂岩形成的中酸性花岗质岩浆混合后形成的熔体,经强烈的结晶分异作用形成的,其形成于陆内裂谷的构造环境,是华北克拉通南缘对哥伦比亚超大陆裂解事件的响应。  相似文献   

热-机碎岩孕镶金刚石钻头的设计及试验研究          下载免费PDF全文

常思  刘宝昌  韩哲  王雪琪  白皓亮 《探矿工程》2022,49(2):77-84

为提高钻进效率,合理利用钻进过程中产生的热量,本文采用摩擦热能辅助机械能碎岩（简称：热-机碎岩）的方法,将氮化硅作为摩擦元件引入孕镶金刚石钻头中,以提高钻头工作层的钻进性能。本文通过对钻头水口、摩擦元件的尺寸计算,钻头胎体、结构的设计,制造了一种新型热-机碎岩孕镶金刚石钻头（简称：热-机碎岩钻头）,并与常规六水口钻头和三水口钻头开展了室内钻进试验对比。结果表明,与六水口钻头和三水口钻头相比,热-机碎岩钻头加入摩擦元件后能够因摩擦生热而使岩石产生弱化作用,钻头钻速提高,在相同钻井液流量下最高可比六水口钻头的机械钻速高33.3%。热-机碎岩钻头胎体的磨损程度比三水口钻头小,热-机碎岩钻头可用于强研磨性地层的钻进。  相似文献   

Effects of continuous flow centrifugation on measurements of trace elements in river water: intrinsic contamination and particle fragmentation     

Patrick Ross  Davide Vignati  Janusz Dominik 《水文研究》2006,20(13):2745-2754

Continuous flow centrifugation (CFC) is a well‐established technique used in natural surface water studies to collect large amounts of suspended solids, thus allowing a broad spectrum of measurements. However, a potential contamination or changes in the particle size distribution during the centrifugation may restrain the use of CFC effluents for element analysis in the colloidal and dissolved fractions. In this paper we evaluate the possibility of using the effluent of a Westfalia centrifuge (type KA2‐06‐075, 9700 rpm) for such analysis. This evaluation is based on two laboratory experiments with deionized and tap water and two field experiments in rivers. Elemental concentration changes across the CFC were assessed from the CFC influent and effluent after a filtration at 0·45 µm. Significant increases were found, mainly in the field experiments at a high suspended solids level and a slightly acid pH. A hypothesis was made on the origin of these increases as a superposition of a centrifuge intrinsic contamination and a particle fragmentation effect. A numerical model based on elemental concentration measurements (inductively coupled plasma mass spectrometry) gave a particle fragmentation level of 0·55% (mass percentage of particles broken up into smaller fragments during centrifugation). In another experiment, a direct particle counting (single particle counter) shows an excess of particles smaller than 500 nm in the CFC effluent, corresponding to a fragmentation level of 0·11%. In consequence, the use of CFC effluent for element analysis is possible in low‐turbidity river or lake waters, but should be carefully considered in waters with high suspended matter contents. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Conduit-vent structures and related proximal deposits in the Las Cañadas caldera, Tenerife, Canary Islands     

Carles Soriano  Inés Galindo  Joan Martí  John Wolff 《Bulletin of Volcanology》2006,69(2):217-231

The Las Cañadas caldera wall and the outer slopes of the caldera provide three-dimensional exposures of numerous proximal-welded fallout deposits and have been mapped in detail. As a result, some parts of the Ucanca and Guajara Formations of the stratigraphy of Martí et al. (1994) have been divided into members that correspond to individual eruptions. Mapping has also revealed the occurrence of conduit-vent structures associated with proximal-welded fallout deposits. Conduit-vent structures consist of an upper flaring area and a lower narrow conduit. Conduit-vent geometry and dimensions include cylindrical plugs and eruptive fissures steeply dipping towards the caldera depression and elongated vents. The flaring area can be rather asymmetric and is usually filled by down-vent rheomorphic flow of the proximal fallout deposit. The lower conduits are filled by lava plug, agglutination of juveniles onto conduit walls and dyke intrusion with eventual dome extrusion. The eruption dynamics of welded fallout deposits and magma fragmentation within the conduit are consistent with an evolution from explosive to effusive. In this context conduit flow regimes evolve from turbulent to annular flow in which the conduit is progressively choked, and laminar flow leading to the final conduit closure.  相似文献   

Mostly Dormant Comets and their Disintegration into Meteoroid Streams: A Review     

Peter Jenniskens 《Earth, Moon, and Planets》2008,102(1-4):505-520

The history of associating meteor showers with asteroidal-looking objects is long, dating to before the 1983 discovery that 3200 Phaethon moves among the Geminids. Only since the more recent recognition that 2003 EH1 moves among the Quadrantids are we certain that dormant comets are associated with meteoroid streams. Since that time, many orphan streams have found parent bodies among the newly discovered Near Earth Objects. The seven established associations pertain mostly to showers in eccentric or highly inclined orbits. At least 35 other objects are tentatively linked to streams in less inclined orbits that are more difficult to distinguish from those of asteroids. There is mounting evidence that the streams originated from discrete breakup events, rather than long episodes of gradual water vapor outgassing. If all these associations can be confirmed, they represent a significant fraction of all dormant comets that are in near-Earth orbits, suggesting that dormant comets break at least as frequently as the lifetime of the streams. I find that most pertain to NEOs that have not yet fully decoupled from Jupiter. The picture that is emerging is one of rapid disintegration of comets after being captured by Jupiter, and consequently, that objects such as 3200 Phaethon most likely originated from among the most primitive asteroids in the main belt, instead. They too decay mostly by disintegration into comet fragments and meteoroid streams. The disintegration of dormant comets is likely the main source of our meteor showers and the main supply of dust to the zodiacal cloud. Editorial handling: Frans Rietmeijer.  相似文献   

A depth average SPH model including μ(I) rheology and crushing for rock avalanches     

Alberto Longo  Manuel Pastor  Lorenzo Sanavia  Diego Manzanal  Miguel Martin Stickle  Chuan Lin  Angel Yague  Saeid Moussavi Tayyebi 《国际地质力学数值与分析法杂志》2019,43(5):833-857

Classical depth-integrated smoothed particle hydrodynamics (SPH) models for avalanches are extended in the present work to include a μ(I)− rheological model enriched with a fragmentation law. With this improvement, the basal friction becomes grain distribution dependent. Rock avalanches, where grain distribution tends to change with time while propagating, are the appropriate type of landslide to apply the new numerical proposal. The μ(I)− rheological models considered in the present work are those of Hatano and Gray, combined with two different fragmentation laws, a hyperbolic and a fractal-based law. As an application, Frank avalanche, which took place in Canada in 1903, is analyzed under the scope of the present approach, focusing in the influence of the rheological and fragmentation laws in the evolution of the avalanche.  相似文献   

中国城市价值链功能分工及其影响因素     

盛科荣  王丽萍  孙威 《地理研究》2020,39(12):2763-2778

价值链的空间重组正在深刻的改变着城市体系的经济景观,建立在价值链分工基础上的城市功能结构的研究已经成为经济地理学的重要课题。将中国上市公司500强企业网络划分为公司总部、商务服务、研究开发、传统制造、现代制造、物流仓储和批发零售七种类型功能区块,研究了中国城市价值链功能分工及其影响因素。结果发现：沿着价值链的功能分工已经成为中国城市体系经济景观的显著特征,功能多样化城市和功能专业化城市并存于中国城市体系,东部地区和城市密集地区的城市在价值链分工中占据了更好的地位;中国城市按照价值链中的优势功能可以划分为九种类型,少数城市转变为承载公司总部、研究开发、商务服务等多样化功能的高等级中心城市,而大量中小城市则转变为传统制造专业化基地;市场潜力、关键资源、区位条件、营商环境等城市属性特征是城市功能分工的重要影响因素,城市资源、区位可达性等属性特征的增强将提高城市成为总部基地、商务中心和研究基地的概率,而降低城市成为传统制造基地的概率。  相似文献   

On the linear elastic responses of the 2D bonded discrete element model     

Gao-Feng Zhao  Qiuyue Yin  Adrian R. Russell  Yingchun Li  Wei Wu  Qin Li 《国际地质力学数值与分析法杂志》2019,43(1):166-182

The bonded discrete element model (DEM) is a numerical tool that is becoming widely used when studying fracturing, fragmentation, and failure of solids in various disciplines. However, its abilities to solve elastic problems are usually overlooked. In this work, the main features of the 2D bonded DEM which influence Poisson's ratio and Young's modulus, and accuracy when solving elastic boundary value problems, are investigated. Outputs of numerical simulations using the 2D bonded DEM, the finite element method, a hyper elasticity analysis, and the distinct lattice spring model (DLSM) are compared in the investigation. It is shown that a shear interaction (local) factor and a geometric (global) factor are two essential elements for the 2D bonded DEM to reproduce a full range of Poisson's ratios. It is also found that the 2D bonded DEM might be unable to reproduce the correct displacements for elastic boundary value problems when the represented Poisson's ratio is close to 0.5 or the long-range interaction is considered. In addition, an analytical relationship between the shear stiffness ratio and the Poisson's ratio, derived from a hyper elasticity analysis and applicable to discontinuum-based models, provides good agreement with outputs from the 2D bonded DEM and DLSM. Finally, it is shown that the selection of elastic parameters used the 2D bonded DEM has a significant effect on fracturing and fragment patterns of solids.  相似文献