排序方式： 共有48条查询结果，搜索用时 828 毫秒
31.
32.
碎石桩作为处理软弱地基土的一种有效手段，往往需要对其试验效果进行分析。评价碎石桩处理后复合地基的性状是否达到地基处理考核指标，并提出可能调整的方案。论文以四川九寨一黄龙机场高填方地基处理工程为背景，介绍了碎石桩法加固软弱土层的现场试验，并对碎石桩处理后复合地基的加固效果进行了检测分析。包括碎石桩体检测和桩间土检测，最后综合室内土工试验、动力触探测试及载荷试验检测结果得出，碎石桩对本工程软弱地基的处理能达到预期的加固效果。其复合地基承载力高于设计要求，具良好的导水性，能有效排出地基中地下水。目前，该试验成果已用于指导机场地基处理与高填方填筑体施工。同时，它对于其它类似工程亦有借鉴意义。 相似文献
33.
三峡水库区陈家沟滑坡地质特征与防治措施 总被引：4，自引：0，他引：4
在研究了三峡水库区奉节县陈家沟滑坡的工程地质条件及滑坡体基本特征的基础上，介绍了该滑坡的结构及变形特征。从滑坡形成条件、诱发变形因素两方面分析了滑坡形成的原因及诱发坡体失稳的主要因素；据岩土样品的试验值、现场大剪值，结合地区经验值及反算值，确定计算滑坡稳定性及剩余滑坡推力的抗剪强度参数，考虑到未来三峡水库蓄水，在不同工况下对滑坡体进行稳定性计算。结果表明：在天然及暴雨情况下，滑坡整体均处于稳定状态；次级滑坡体在饱水及水库蓄水后，处于临界蠕滑或失稳状态。结合工程实际对滑坡治理进行初步研究，提出回填压脚专档为幸捕以排水的综合治理措施。 相似文献
34.
海洋是地表环境中最重要的碳库,准确估算CO2在海洋与大气之间的交换对于进一步阐明其变化过程机理具有重要意义。利用南海2011—2020年的海温、风速、海平面气压等多种遥感反演数据,基于海-气分压差算法,构建了海-气CO2通量遥感估算模型,并分析其时空变化特征。结果表明：（1） 遥感估算模型在整个南海海域具有较好的通用性,对比实测区域数据,估算结果的平均绝对误差和均方根误差分别为1.04和1.37 mmol/(m2·d);对于源汇区的识别准确率达到90.63%。（2） 南海总体表现为弱碳源,CO2通量的季节变化呈现出夏秋季高、冬春季低的特征,夏季和冬季分别为全年最高和最低。空间分布特征为南北部差异大。碳汇高值区始终位于北部,且冬季为强碳汇,而碳源高值区夏季出现在中南半岛东南部,秋季则转移到南海东北部。（3） 南海三种典型区（北部陆架陆坡、中部海盆、南部陆坡）的CO2通量随时间推移均呈现降低的趋势,且北部下降速度最快。2011—2020年,南海年均向大气净释放碳1.51×107 t,但其碳释放量呈降低趋势,降低速度为2.03×106 t/a,南海总体的“碳源”强度有所减弱。研究结果可为制定碳排放及碳交易政策提供科学参考。 相似文献
35.
Accumulator-Based Deep-Sea Microbe Gastight Sampling Technique 总被引：1，自引：0，他引：1
1.IntroductionPlenty of microbes exist in deep sea(Jiang,2000).They can survive and propagate under theconditions of extraordinary cold or heat and high pressure(Liu,2001).Studies on deep-sea microbesshowthat they have the function of decomposing petroleu… 相似文献
36.
虽然采用遥感图像提取的植被指数在空间上能较好的反映作物的状况,但其不能预测植被指数在空间上的变化范围,如果能从整体上了解不同市县在不同季节的平均植被指数值,就可以对该区域整体植被状态进行量化分析,也就可以从大范围内进行植被指数的预测分析.利用地理信息系统(GIS)和地统计学相结合的地理统计分析模块(ArcGIS Geostatistical Analyst),根据MODIS遥感数据提取的每季度不同市县平均NDVI植被指数,采用Kriging插值的方法分析了海南岛归一化植被指数(NDVI)季节性变化趋势,并 相似文献
37.
基于2000—2015年MODIS NPP遥感数据,利用橡胶产胶潜力模型得到了中国橡胶主产区年橡胶产胶潜力;利用橡胶树种植气候适宜性区划的研究成果,得到了中国橡胶主产区橡胶气候适宜区分布;在此基础上分析了不同气候适宜区橡胶产胶潜力的差异及不同高程上橡胶产胶能力的差异。结果表明:(1)中国橡胶主产区中,云南橡胶产胶潜力最高,海南次之,广东最低;近十多年除云南橡胶产胶潜力呈微弱减少外,海南、广东两省均呈增加趋势;(2)高气候适宜区产胶潜力平均值为103.25g·m-2;中气候适宜区橡胶潜力平均值为99.92g·m-2;(3)在高、中气候适宜区,海拔在500~800m区域的橡胶年产胶潜力整体高于500m以下区域。 相似文献
38.
39.
An integrated dynamic model of China’s deep ocean mining system is developed and the fast simulation analysis of its longitudinal reciprocating motion operation processes is achieved. The seafloor tracked miner is built as a three-dimensional single-body model with six-degree-of-freedom. The track-terrain interaction is modeled by partitioning the track-terrain interface into a certain number of mesh elements with three mutually perpendicular forces, including the normal force, the longitudinal shear force and the lateral shear force, acting on the center point of each mesh element. The hydrodynamic force of the miner is considered and applied. By considering the operational safety and collection efficiency, two new mining paths for the miner on the seafloor are proposed, which can be simulated with the established single-body dynamic model of the miner. The pipeline subsystem is built as a three-dimensional multi-body discrete element model, which is divided into rigid elements linked by flexible connectors. The flexible connector without mass is represented by six spring-damper elements. The external hydrodynamic forces of the ocean current from the longitudinal and lateral directions are both considered and modeled based on the Morison formula and applied to the mass center of each corresponding discrete rigid element. The mining ship is simplified and represented by a general kinematic point, whose heave motion induced by the ocean waves and the longitudinal and lateral towing motions are considered and applied. By integrating the single-body dynamic model of the miner and the multi-body discrete element dynamic model of the pipeline, and defining the kinematic equations of the mining ship, the integrated dynamic model of the total deep ocean mining system is formed. The longitudinal reciprocating motion operation modes of the total mining system, which combine the active straight-line and turning motions of the miner and the ship, and the passive towed motions of the pipeline, are proposed and simulated with the developed 3D dynamic model. Some critical simulation results are obtained and analyzed, such as the motion trajectories of key subsystems, the velocities of the buoyancy modules and the interaction forces between subsystems, which in a way can provide important theoretical basis and useful technical reference for the practical deep ocean mining system analysis, operation and control. 相似文献
40.
The dynamic analysis of a pipe system is one of the most crucial problems for the entire mining system.A discrete element method(DEM)is proposed for the analysis of a deep-ocean mining pipe system,including the lift pipe,pump,buffer and flexible hose.By the discrete element method,the pipe is divided into some rigid elements that are linked by flexible connectors.First,two examples representing static analysis and dynamic analysis respectively are given to show that the DEM model is feasible.Then the three-dimensional DEM model is used for dynamic analysis of the mining pipe system.The dynamic motions of the entire mining pipe system under different work conditions are discussed.Some suggestions are made for the actual operation of deep-ocean mining systems. 相似文献