共查询到20条相似文献，搜索用时 31 毫秒
1.
In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with some subsystems to form the complete integrated deep ocean mining pilot system and perform dynamic analysis, a new method for the dynamic modeling and analysis of the miner is proposed and developed in this paper, resulting in a simplified 3D single-body vehicle model with three translational and three rotational degrees of freedom, while the track-terrain interaction model is built by partitioning the track-terrain interface into discrete elements with parameterized force elements built on the theory of terramechanics acting on each discrete element. To evaluate and verify the correctness and effectiveness of this new modeling and analysis method, typical comparative studies with regard to computational efficiency and solution accuracy are carried out between the traditional modeling method of building the tracked vehicle as a multi-body model and the new modeling method. In full consideration of the particular structure design of the pilot miner, the special characteristics of the seafloor soil and the hydrodynamic force of near-seafloor current, the dynamic simulation analysis of the miner is performed and discussed, which can provide useful guidance and reference for the practical miner system in design and operation. This new method can not only realize the rapid dynamic simulation analysis of the miner but also make possible the integration and rapid dynamic analysis of the complete integrated deep ocean mining pilot system in further researches. 相似文献
2.
Dynamic Analysis of the Seafloor Pilot Miner Based on Single-Body Vehicle Model and Discretized Track-Terrain Interaction Model 总被引：2，自引：1，他引：1
In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with some subsystems to form the complete integrated deep ocean mining pilot system and perform dynamic analysis,a new method for the dynamic modeling and analysis of the miner is proposed and developed in this paper,resulting in a simplified 3D single-body vehicle model with three translational and three rotational degrees of freedom,while the track-terrain interaction model is built by partitioning the track-terrain interface into discrete elements with parameterized force elements built on the theory of terramechanics acting on each discrete element.To evaluate and verify the correctness and effectiveness of this new modeling and analysis method,typical comparative studies with regard to computational efficiency and solution accuracy are carried out between the traditional modeling method of building the tracked vehicle as a multi-body model and the new modeling method.In full consideration of the particular structure design of the pilot miner,the special characteristics of the seafloor soil and the hydrodynamic force of near-seafloor current,the dynamic simulation analysis of the miner is performed and discussed,which can provide useful guidance and reference for the practical miner system in design and operation.This new method can not only realize the rapid dynamic simulation analysis of the miner but also make possible the integration and rapid dynamic analysis of the complete integrated deep ocean mining pilot system in further researches. 相似文献
3.
The Soft Yoke Mooring System (SYMS) is a single point mooring system for shallow water. It is composed of a mooring framework, mooring legs, yoke, and single point, and is located at the Floating Production Storage and Offloading (FPSO) through 13 hinge joints, such as universal joints and thrust bearings. Mooring restoring force, motions and postures of mooring components, and mechanical behaviors of hinge joints are major criteria for the structural design of the SYMS. Aiming at the difficulties of the multibody dynamics in traditional design of the SYMS, a multi-body dynamic mathematical modeling with seven independent degrees of freedom (DOFs) which is applicable to prototype field engineering was developed in this study. The proposed mathematical modeling of the SYMS multibody dynamic system has several advantages: 1. Internal tribological behaviors in hinge joints are considered within the presented multibody dynamics model to illustrate the good dynamic effects of the SYMS. 2. The multibody dynamic model can be applied in field service. Correctness and feasibility of the proposed multibody dynamic simulation method for describing motions and postures of hinges and single-body were validated by the prototype monitoring data. 3. The horizontal restoring force of the SYMS was calculated according to field measurement data. The motion state of each single body and internal stress distributions at each hinge joint in the SYMS are given. 4. The multibody dynamics calculation program can be directly used for the real-time monitoring of mechanical behaviors of the SYMS under the service state. The simulated results can provide real-time guarantee for safety alarming of the system. The vulnerability of the mooring system in service was evaluated based on long-term monitoring data analysis. 相似文献
4.
波浪作用下缆船拖带系统非线性运动数值模拟 总被引：1，自引：0，他引：1
基于船舶操纵性运动方程和拖缆的三维动力学运动方程,提出了被拖点位置匹配的方法,建立了拖船—拖缆—被拖船系统整体非线性拖带动力学模型。为了考察被拖船航向稳定性与横向稳性的关系以及波浪载荷作用的影响,被拖船采用水平面四自由度运动方程,并引入了波浪的作用力和力矩。拖船采用PD控制方法较真实地模拟了拖船航向改变的运动过程。对一个拖船—拖缆—被拖船系统(5 000 t的拖船和3 000 t的被拖船)在时域内进行了规则波浪作用下拖带运动的模拟,计算结果表明被拖带船舶在波浪中运动呈现运动稳定、不稳定和临界状态3种可能的特性。根据模拟计算结果,认为波浪中拖带航向稳定是被拖带船舶保持稳性的必要条件。 相似文献
5.
Nonlinear Finite Element Analysis of Ocean Cables 总被引：1，自引：1，他引：1
Nam-ⅡKIM Sang-SooJEON Moon-YoungKIM 《中国海洋工程》2004,18(4):537-550
This study has focused on developing numerical procedures for the dynamic nonlinear analysis of cable structures subjected to wave forces and ground motions in the ocean. A geometrically nonlinear finite element procedure using the isoparamnetrie curved cable element based on the Lagrangian folmulation is briefly summarized. A simple and accurate method to determine the initial equilibrium state of cable systems associated with self-weights, buoyancy and the motion of end points is presented using the load incremental method combined with penalty method. Also the Newmark method is used for dynamic nonlinear analysis of ocean cables. Numerical examples are presented to validate the present numerical method. 相似文献
6.
The dynamic analysis of a pipe system is one of the most crucial problems for the entire mining system.A discrete element method(DEM)is proposed for the analysis of a deep-ocean mining pipe system,including the lift pipe,pump,buffer and flexible hose.By the discrete element method,the pipe is divided into some rigid elements that are linked by flexible connectors.First,two examples representing static analysis and dynamic analysis respectively are given to show that the DEM model is feasible.Then the three-dimensional DEM model is used for dynamic analysis of the mining pipe system.The dynamic motions of the entire mining pipe system under different work conditions are discussed.Some suggestions are made for the actual operation of deep-ocean mining systems. 相似文献
7.
The paper describes model tests of a tanker with two fixed bow-mounted foils (wavefoils), for resistance and motion reduction in waves. Measured ship resistance, wavefoil thrust and ship motions were compared with time-domain simulations. The wavefoil forces were calculated using a slightly modified Leishman–Beddoes dynamic stall model, with a two-way coupling to the ship motions. In typical sea states in head seas, employing the wavefoils reduced ship resistance by 9–17%, according to scaled model test resistance. Heave and pitch were reduced by −11% to 32% and 11% to 25%, respectively. The foils affect the flow around the hull. This should be considered when selecting the wavefoil location in the design process. 相似文献
8.
A time-domain analysis is used to predict wave loading and motion responses for a ship traveling at a constant speed in regular oblique waves. Considered as a distribution of normal velocities on the wetted hull surface, the combined diffraction and radiation perturbations caused by the forward moving ship and her motions are determined simultaneously. This way, the ship-hull boundary condition is exactly fulfilled. The 3-D time domain Green's function is used to express the combined diffraction/radiation potential in terms of impulsive and memory potentials. Application of the Bernoulli equation yields the pressure distribution and accordingly, the necessary hydrodynamic forces. The equations of motion of the ship are then developed and solved in the time domain.Forces and motions at forward speed are predicted for a Wigley ship-hull in head waves and for a catamaran-ferry in oblique waves. Comparison is made with published theoretical and experimental results for the Wigley ship-hull, and the agreement is good. For the catamaran, a self-propelled model is built and tested both in a large towing tank and in a seakeeping basin in order to measure the six-degrees-of-freedom forces, moments and motions at forward speed in regular waves of different directions. For the longitudinal motions, the agreement between measurements and predictions is generally good. For the transverse motions, however, acceptable discrepancy exists. The discrepancy is thought to be mainly due to the exclusion from the analysis of the rudder forces and viscous damping. The inclusion of such nonlinear effects in the time domain simulation involves complex analysis and this problem is left to a future research. 相似文献
9.
10.
This paper presents a predictive model for undrained penetration of cylinders into soft seafloor soils. The penetration depth will depend on the velocity of the cylinder as it touches down at the seafloor, and the net deceleration of the cylinder as it is acted on by forces of self-weight, soil buoyancy, and soil-shearing resistance. The soil-shearing resistance force increases as a function of penetration depth and, due to the dependence of undrained shear strength on strain rate, penetration velocity. This paper presents finite element (FE) simulations that quantify both effects and form the basis of a simplified soil-resisting force model. Strain-rate effects are modeled within a framework of rate-dependent plasticity, with shearing resistance increasing semilogarithmically with increasing strain rate above a certain threshold strain rate. With all forces acting on the cylinder, estimated penetration depths are predicted from simple equations of motion for a single particle. Comparisons to laboratory tests involving penetration of cylinders into soft reconstituted marine clay show reasonable agreement between model predictions and measurements. 相似文献
11.
浮基多体系统自激运动响应的时域分析方法 总被引：2，自引：2，他引：2
浮基多体系统上部机构作业时不仅存在多体系统内部各物体间的耦合作用 ,还存在浮基与流场间的耦合作用。本文将浮基在流场中引起的辐射势表示为浮基加速度与时域规范化速度势乘积的卷积形式 ,导出流体动压力及静水系泊恢复力与浮基运动的关系。使用多刚体力学的凯恩方法得到系统的动力学方程。最后给出了在时域中数值求解系统运动响应的具体步骤 相似文献
12.
13.
The analytical method developed by Svendsen (1968) for a forced heave motion is extended to the general problem of wave induced heave, roll and sway motions of a long ship at a depth of water which is only slightly larger than the draught of the ship. This corresponds, for example, to the situation of a fully loaded ship in a harbour area.After linearization of the problem, the water motion is considered for each of the three individual motions and for the wave reflection-transmission problem for a fixed ship. The ensuing results for the forces on the ship are then synthesized to form the equations of motion, which are presented with all coefficients given, including mooring forces.Analytical and numerical results are given for the three components of motion, for the associated resonance frequencies, and for the hydrodynamic masses and moments of inertia. Finally, the assumptions used are analyzed and evaluated by comparison with measurements and with other results for a special case. 相似文献
14.
This study investigates the coupling effects of six degrees of freedom in ship motion with fluid oscillation inside a three-dimensional rectangular container using a novel time domain simulation scheme. During the time marching, the tank-sloshing algorithm is coupled with the vessel-motion algorithm so that the influence of tank sloshing on vessel motions and vice versa can be assessed. Several factors influencing the dynamic behavior of tank–liquid system due to moving ship are also investigated. These factors include container parameters, environmental settings such as the significant wave height, current velocity as well as the direction of wind, wave and flow current acting on the ship. The nonlinear sloshing is studied using a finite element model whereas nonlinear ship motion is simulated using a hybrid marine control system. Computed roll response is compared with the existing results, showing fair agreement. Although the two hull forms and the sea states are not identical, the numerical result shows the same trend of the roll motion when the anti-rolling tanks are considered. Thus, the numerical approach presented in this paper is expected to be very useful and realistic in evaluating the coupling effects of nonlinear sloshing and 6-DOF ship motion. 相似文献
15.
This paper proposes a geometrically exact formulation for three-dimensional static and dynamic analyses of the umbilical cable in a deep-sea remotely operated vehicle (ROV) system. The presented formulation takes account of the geometric nonlinearities of large displacement, effects of axial load and bending stiffness for modeling of slack cables. The resulting nonlinear second-order governing equations are discretized spatially by the finite element method and solved temporally by the generalized- implicit time integration algorithm, which is adapted to the case of varying coefficient matrices. The ability to consider three-dimensional union action of ocean current and ship heave motion upon the umbilical cable is the key feature of this analysis. The presented formulation is firstly validated, and then three numerical examples for the umbilical cable in a deep-sea ROV system are demonstrated and discussed, including the steady configurations only under the action of depth-dependent ocean current, the dynamic responses in the case of the only ship heave motion, and in the case of the combined action of the ship heave motion and ocean current. 相似文献
16.
This paper proposes a geometrically exact formulation for three-dimensional static and dynamic analyses of the umbilical cable in a deep-sea remotely operated vehicle(ROV) system. The presented formulation takes account of the geometric nonlinearities of large displacement, effects of axial load and bending stiffness for modeling of slack cables. The resulting nonlinear second-order governing equations are discretized spatially by the finite element method and solved temporally by the generalized-a implicit time integration algorithm, which is adapted to the case of varying coefficient matrices. The ability to consider three-dimensional union action of ocean current and ship heave motion upon the umbilical cable is the key feature of this analysis. The presented formulation is firstly validated, and then three numerical examples for the umbilical cable in a deep-sea ROV system are demonstrated and discussed, including the steady configurations only under the action of depth-dependent ocean current, the dynamic responses in the case of the only ship heave motion, and in the case of the combined action of the ship heave motion and ocean current. 相似文献
17.
Responses of a four-legged offshore platform to wave forces are analysed by taking account of one torsional motion around the vertical axis which passes the centre of gravity of the structure, and two translational motions in the horizontal plane. Applying the spring-mass system with one degree-of-freedom to each mode of motion, a calculation method for predicting resultant dynamic displacements of the topdeck is developed. Both the inline force and the transverse force are considered as external forces. The calculated results are found to agree with experiments. Furthermore, the influence of seven important factors on the dynamic response is examined by the calculations. It is shown that the combination pattern of the direction factor of the transverse force is of importance in dynamic analysis. 相似文献
18.
Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice floes and a moving ship. The pancake ice floes are modelled with three-dimensional （3-D） dilated disk elements considering the buoyancy, drag force and additional mass induced by the current. The ship hull is modelled with 3D disks with overlaps. Ice loads on the ship hull are determined through the contact detection between ice floe element and ship hull element and the contact force calculation. The influences of different ice conditions （current velocities and directions, ice thicknesses, concentrations and ice floe sizes） and ship speeds are also examined on the dynamic ice force. The simulated results are compared qualitatively well with the existing field data and other numerical results. This work can be helpful in the shil3 structure design and the navigation securitv in ice-covered fields. 相似文献
19.
The motions of a high speed craft are highly influenced by speed and dynamic forces that begin to be important for high Froude numbers. Classical ship motions theories and some seakeeping programs do not include the effect of these dynamic forces that mainly affect to the damping of vertical motions, and have to be corrected to model high speed crafts. In any other way, the use of these theories or programs would be unrealistic. In this paper, some theories that can be used to predict the seakeeping behaviour of high speed crafts, considering dynamic forces, are studied and validated against seakeeping tests of some fast monohulls models. Tests and results focus on vertical motions in head seas, which are the most severe for these fast crafts. Experimental results of vertical motions are compared with numerical calculations and conclusions about the range of application of the presented theories are obtained. 相似文献
20.
AbstractDeep-sea mining (DSM) is an advanced technology. This article is focused on the dynamic analysis of a coupled vessel/riser/equipment system of a DSM based on radial basis function (RBF) neural network approximations while considering vessel dynamic positioning (DP) and active heave compensation (AHC). A coupled model including the production support vessel (PSV), lifting riser, and slurry pump is established containing simulated DP and AHC models. Furthermore, dynamic simulations are implemented to obtain the results of the vessel motions, thruster forces, pump motions and riser tensions. Using optimal Latin hypercube sampling, an RBF neural network approximation model is established, the input includes environmental factors and the output includes the dynamic responses of the pump motion and riser tension. Calculations are performed using RBF network approximations instead of a coupled model. The obtained results show that the PSV wave frequency (WF) motions have significant influence on the dynamic responses of the subsea system. Moreover, the current load affects the compensation effect. The RBF network approximation model can be used to reduce the required calculation time. 相似文献