The planet formation imager     

John D. Monnier  Stefan Kraus  Michael J. Ireland  Fabien Baron  Amelia Bayo  Jean-Philippe Berger  Michelle Creech-Eakman  Ruobing Dong  Gaspard Duchêne  Catherine Espaillat  Chris Haniff  Sebastian Hönig  Andrea Isella  Attila Juhasz  Lucas Labadie  Sylvestre Lacour  Stephanie Leifer  Antoine Merand  Ernest Michael  Stefano Minardi  Christoph Mordasini  David Mozurkewich  Johan Olofsson  Claudia Paladini  Romain Petrov  Jörg-Uwe Pott  Stephen Ridgway  Stephen Rinehart  Keivan Stassun  Jean Surdej  Theo ten Brummelaar  Neal Turner  Peter Tuthill  Kerry Vahala  Gerard van Belle  Gautam Vasisht  Ed Wishnow  John Young  Zhaohuan Zhu 《Experimental Astronomy》2018,46(3):517-529

The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially sensitive to thermal emission from young exoplanets (and their disks) with a high spectral resolution mode to probe the kinematics of CO and H₂O gas. In this paper, we give an overview of the main science goals of PFI, define a baseline PFI architecture that can achieve those goals, point at remaining technical challenges, and suggest activities today that will help make the Planet Formation Imager facility a reality.  相似文献   

Analysis of Y-component of Geomagnetic Field and SYM-H Index Using Wavelet Multiresolution Analysis     

Santosh Sapkota  Saurav  Sarup Khadka  Gautam  Sabin  Karki  Monika  Adhikari  Binod  Mishra  Roshan Kumar  Klausner  Virginia  Dhungana  Beni Madhav 《Geomagnetism and Aeronomy》2022,62(1-2):125-137

Geomagnetism and Aeronomy - Electrodynamical coupling between the solar wind’s plasma and the Earth’s magnetosphere creates geomagnetic disturbances recorded on the ground. This work...  相似文献   

The role of mechanical stratigraphy in the lateral variations of thrust development along the central Alberta Foothills,Canada     

Hyunjung Lee  Yirang Jang  Sanghoon Kwon  Myong-Ho Park  Gautam Mitra 《地学前缘(英文版)》2018,9(5):1451-1464

Fold-thrust belts generally exhibit significant variations in structural styles such as differences in thrust geometries and frequencies in imbrication. A natural laboratory of this pattern is preserved in the central Alberta Foothills of the Canadian Rockies, where differences in thrust geometries are represented by the existence vs. non-existence of triangle zones. To seek the factors that make this difference in these regions in terms of structural geometry, stratigraphic thickness variations and mechanical stratigraphy of the sedimentary layers, structural interpretation is conducted based on admissible cross-sections and well log interpretations. In northern region, a backthrust is detached from an incompetent layer(viz.Nomad Unit of the Wapiabi Formation), which gets thinner from the Foothills to the Plains, indicating that it is developed where the shale layers are pinched out where triangle zone is developed. Backthrust is also developed in the southern region, where mechanical strengths of strata(viz. Bearpaw Formation)increase toward the foreland. In the central region, however, only forethrusts are developed along the weak continuous decollement layers(viz. Turner Valley and Brazeau formations), forming an imbricate fan without development of the triangle zone. Incompetent layers such as the top Wapiabi(Nomad),Brazeau(Bearpaw), Coalspur and Paskapoo formations are also pinched out laterally, forming fault glide horizons in different stratigraphic levels in each region. These results indicate that, along the transport direction, triangle zone is developed in relation to the stratigraphic pinch out of the Nomad Unit in the northern region, and is formed associated with the variations in strengths of the layers constituting the Bearpaw Formation in the southern region. It is notable that all the glide horizons are developed along incompetent layers. However, triangle zones are not developed in the areas of continuous stratigraphy of the Nomad Unit, which does not serve as a glide horizon in the central region. This suggests that factors such as stratigraphic thickness changes of incompetent layers and mechanical stratigraphy of the sedimentary layers play an important role in the development of lateral variations in thrust system evolution in terms of triangle zone vs. imbricate fan in the central Alberta Foothills.  相似文献   

Stability assessment of jointed rock slope with different crack infillings under various thermomechanical loadings     

Pushpendra Sharma  Amit Kumar Verma  Anil Negi  Manish Kumar Jha  Pradeep Gautam 《Arabian Journal of Geosciences》2018,11(15):431

Thermoelastic deformation of rock significantly affects the stability of rock slope because thermoelastic strains may cause fracture propagation under favorable condition of failure. Rock slope stability depends on the balance between shear stress and shear resistance along the plane of weakness. Due to warming of rock slopes by heat transfer phenomena, viz. conduction and convection, considerable change in induced stresses (normal and shear) and resistance takes place which further causes instability in rock slope. In this paper, a two-dimensional finite element model has been used to simulate the stability of jointed rock slope containing crack in its upper surface. Four different cases have been simulated on the basis of infilling material (air, water, ice, water and ice) in the crack. Stability of rock slope is examined in terms of shear displacement and factor of safety for different thermal conditions of slope surface. A comparative study has been done for the four cases of infilling material in the crack. The various affecting parameters, viz. shear displacement, factor of safety, shear strength along the joint, and different surface temperature conditions, are illustrated by means of graphs. It has been found that the values of horizontal and vertical displacements are in the range of millimeters. The maximum values of horizontal and vertical displacements are 2.17 mm. Moreover, the maximum values of vertical compressive and tensile stresses are 15.4 MPa and 4.45 MPa respectively for the said four cases. According to the infilling material in the crack, the stability of the rock slope for the given geometry of slope is found in the following order: crack filled with ice < crack filled with ice and water < crack filled with water < empty crack. Validations of numerical results have been done from previous studies, and it has been found that the trends of normal stress, shear strength, and shear displacement along the joint are well matched.  相似文献   

Streamflow trends in Nepal     

M. R. Gautam  K. Acharya 《水文科学杂志》2013,58(2):344-357

Abstract

This study presents the first comprehensive nationwide trend detection of streamflow in Nepal, a country that has been historically understudied despite its critical location as the southern pathway for most of the Himalayan snowpack melt and torrential seasonal monsoon rains. We applied Mann-Kendall and Sen's trend tests using trend-free pre-whitening and bootstrap approaches to two streamflow data sets to deal with serial and cross-correlation. The two data sets comprised 23–33 hydrometric stations with 31 years and more than 20 years of published data, respectively. The test on the 33 stations data set showed that 23% of the streamflow variables studied had statistically significant trends, evenly divided between upward and downward trends. Similarly, in the second, relatively smaller data set, 24% of variables exhibited trends, of which 41% were downward and 59% upward. The higher percentage of observed upward trends in pre-monsoon and winter seasonal average flow is noteworthy given the potential snowmelt contribution in many of the studied sites. Trends were mostly absent in stations draining the larger basins. However, some spatial patterns were seen in the observed trend directions, specifically, a downward trend in the Karnali-Mahakali River basin and an upward trend in the West Rapti River basin, as well as a nationwide absence of trend in the post-monsoon season.

Editor Z.W. Kundzewicz

Citation Gautam, M.R. and Acharya, K., 2011. Streamflow trends in Nepal. Hydrological Sciences Journal, 57 (2), 344–357.  相似文献   

Geochemistry of an ENE–WSW to NE–SW trending ∼2.37 Ga mafic dyke swarm of the eastern Dharwar craton,India: Does it represent a single magmatic event?     

Rajesh K. Srivastava  M. Jayananda  Gulab C. Gautam  V. Gireesh  Amiya K. Samal 《Chemie der Erde / Geochemistry》2014

A vast tract of ENE–WSW to NE–SW trending mafic dyke swarm transects Archaean basement rocks within the eastern Dharwar craton. Petrographic data reveal their dolerite/olivine dolerite or gabbro/olivine gabbro composition. Geochemical characteristics, particularly HFSEs, indicate that not all these dykes are co-genetic but are probably derived from more than one magma batch and different crystallization trends. In most samples the La^N/Lu^N ratio is at ∼2, whereas others have a La^N/Lu^N ratio >2 and show higher concentrations of high-field strength elements (HFSEs) than the former group. As a consequence, we assume that the ENE–WSW to NE–SE trending mafic dykes of the eastern Dharwar craton do not represent one single magmatic event but were emplaced in two different episodes; one of them dated at about 2.37 Ga and another probably at about 1.89 Ga. Trace element modelling also supports this inference: older mafic dykes are derived from a melt generated through ∼25% melting of a depleted mantle, whereas the younger set of dykes shows its derivation through a lower degree of melting (∼15%) of a comparatively enriched mantle source.  相似文献   

Proterozoic Rifting in the Pranhita-Godavari Valley: Implication on India-Antarctica Linkage     

Asru K. Chaudhuri  Gautam K. Deb 《Gondwana Research》2001,4(4):592-593

  相似文献   

Landscape Dynamics in North East Region of India (Meghalaya State) Using Spatial Decision Tree Model     

Gautam Talukdar  Suddhasheel Ghosh  P. S. Roy 《国际地球制图》2013,28(1):11-18

Abstract

India has figured with two hotspots ‐ the Western Ghats and the Eastern Himalayas ‐ in an identification of 8 ‘hottest’ biodiversity hotspots (Myers et. al. 2000). The Meghalaya state (study area) in North Eastern India lies within the “Indo‐Burma” area, which is one of the 8 ‘hottest’ biodiversity hotspots. Timber extraction, the age‐old practice of shifting cultivation and mining has been a major cause of extensive changes in this landscape. Human induced disturbance differs from natural disturbance especially in extension, severity and frequency. Spatial presentation of landscape dynamics can be used to infer disturbance regimes horizontally. Disturbance regimes are mostly dominated by landuse practices in Meghalaya and these landuse practices are important contributors for overall interpretation of ecological processes operating within the landscape. In this scenario, the development of models to study landscape dynamics using remote sensing and GIS would be of great importance to ecologists. In this paper, we make an attempt to characterize landscape dynamics using a decision tree based approach. The varying impacts of human interventions reflected in three zones at landscape level have been brought out in the present study. The physiographic zones of Meghalaya (viz. Garo hills, Khasi hills and Jaintia hills) manifest different landscape characteristics and present varying degree of degradation status. Garo hills, experiences maximum shifting cultivation and has shown highest dynamism in the study area followed by Jaintia and Khasi hills. Characterization of landscape dynamics is important in the perspective of decision makers and policy makers in order to prioritize conservation strategies, so that urgent and necessary action can be taken.  相似文献   

Deccan plume,lithosphere rifting,and volcanism in Kutch,India     

Gautam Sen  Michael Bizimis  Reshmi Das  Dalim K. Paul  Arijit Ray  Sanjib Biswas 《Earth and Planetary Science Letters》2009,277(1-2):101-111

Kutch (northwest India) experienced lithospheric thinning due to rifting and tholeiitic and alkalic volcanism related to the Deccan Traps K/T boundary event. Alkalic lavas, containing mantle xenoliths, form plug-like bodies that are aligned along broadly east–west rift faults. The mantle xenoliths are dominantly spinel wehrlite with fewer spinel lherzolite. Wehrlites are inferred to have formed by reaction between transient carbonatite melts and lherzolite forming the lithosphere. The alkalic lavas are primitive (Mg# = 64–72) relative to the tholeiites (Mg# = 38–54), and are enriched in incompatible trace elements. Isotope and trace element compositions of the tholeiites are similar to what are believed to be the crustally contaminated Deccan tholeiites from elsewhere in India. In terms of Hf, Nd, Sr, and Pb isotope ratios, all except two alkalic basalts plot in a tight cluster that largely overlap the Indian Ridge basalts and only slightly overlap the field of Reunion lavas. This suggests that the alkalic magmas came largely from the asthenosphere mixed with Reunion-like source that welled up beneath the rifted lithosphere. The two alkalic outliers have an affinity toward Group I kimberlites and may have come from an old enriched (metasomatized) asthenosphere. We present a new model for the metasomatism and rifting of the Kutch lithosphere, and magma generation from a CO₂-rich lherzolite mantle. In this model the earliest melts are carbonatite, which locally metasomatized the lithosphere. Further partial melting of CO₂-rich lherzolite at about 2–2.5 GPa from a mixed source of asthenosphere and Reunion-like plume material produced the alkalic melts. Such melts ascended along deep lithospheric rift faults, while devolatilizing and exploding their way up through the lithosphere. Tholeiites may have been generated from the main plume head further south of Kutch.  相似文献   

Modeling of particle breakage in a smooth double roll crusher     

Sajjan Kumar Soni  Satish Chandra Shukla  Gautam Kundu   《International Journal of Mineral Processing》2009,90(1-4):97-100

A model has been developed to describe the breakage behavior of particle breakage in a smooth double roll crusher. In addition to this, an empirical relationship has been obtained between Hardgrove Grindability Index (HGI) of material and breakage parameters. The model uses matrix method of breakage process analysis. Experiments were carried out in a laboratory scale smooth double roll crusher using different materials. The model has been verified experimentally and gives product size distribution after breakage which matches with the experimental distribution well within the satisfactory range.  相似文献