兰州九州重塑黄土的抗拉变形破坏机理   总被引：3，自引：2，他引：1  

吴旭阳  梁庆国  牛富俊  李国玉 《冰川冻土》2017,39(4):842-849

通过对不同干密度及含水量的重塑黄土进行室内抗拉强度试验,探究轴向压裂法致使试样破坏的机理及一般规律。结果表明,黄土的抗拉变形破坏可分为4种类型：I类,高干密度低含水量（干密度大于1.65 g·cm^-3,含水量小于15%）,抗拉强度介于8~12 kPa;Ⅱ类,低干密度低含水量（干密度小于1.60 g·cm^-3,含水量小于15%）,抗拉强度介于4~8 kPa;Ⅲ类,高干密度高含水量（干密度大于1.65 g·cm^-3,含水量大于17%）,抗拉强度介于4~8 kPa;IV类,低干密度高含水量（干密度小于1.60 g·cm^-3,含水量大于17%）,抗拉强度介于3~4 kPa。I类、Ⅱ类破坏类型属于脆性破坏,Ⅲ类、IV类属于塑性破坏。重塑黄土抵抗变形最弱的含水量为15%。通过对比分析黄土、普通黄黏土、红黏土及膨胀土的抗拉强度发现,在最优含水量处,不同干密度下黄土的抗拉强度均最小。黏性土的持水能力远超过黄土。黏土及膨胀土的抗拉强度均在最优含水量处达到最大值,而黄土的抗拉强度随着含水量的增加持续减小。研究结果对黄土强度特性的理解具有一定的参考意义。  相似文献   

基于SRTM DEM的地形起伏度对天水市黄土滑坡的影响分析   总被引：2，自引：0，他引：2  

宿星  魏万鸿  郭万钦  王思源  王国亚  吴玮江  叶伟林 《冰川冻土》2017,39(3):616-622

以天水市辖区30 m分辨率的SRTM DEM数据为基础,首先利用GIS空间分析模块中邻域统计分析法,依次选取2×2、3×3、4×4、…、28×28、29×29、30×30共29个矩形邻域分析窗口,运用均值变点分析法进行最佳计算单元的计算分析。结果表明：12×12的网格大小（12.96×10⁴ m²）为曲线突变的拐点,作为曲线由陡变缓的阈值,确定12×12的网格大小（12.96×10⁴ m²）为研究区地形起伏度计算的最佳单元,生成研究区地形起伏度分级图。进而采用确定性系数法（CF）、证据权法、信息量法和条件概率法对研究区发育的黄土滑坡灾害与地形起伏度之间的相关关系进行了定量分析。研究结果表明,区内地形起伏度影响因子层中地形起伏度60~120 m的分级因子层为黄土滑坡灾害的易发因子层,而其中60~90 m区间的值最大,为黄土滑坡灾害的优势因子区间,对滑坡的响应最敏感。  相似文献   

A call for Australian loess: discussion and commentary     

Ian Smalley 《Area》2008,40(1):131-134

A study of loess in Australia brings the idea of 'desert' loess back into view. Production of particles in deserts still presents problems, but deserts do make adequate storage regions for loess particles – usually produced in adjacent mountains. Straightforward for Central Asia or China (a particle source in High Asia and convenient deserts en route to eventual deposition), but the Sahara and Australian deserts traditionally present problems. If loess material is allowed to be silt-sized clay agglomerate particles as well as the usual clastic primary minerals, then loess in Australia seems reasonable. Loess acquires its remarkable loessic qualities via aeolian deposition – the nature of the particles is perhaps of lesser importance. A more generalised approach to airborne sediments might be attempted, with two major types of suspension material recognised: large dust (maybe coarse and very coarse silt, say 20–60 µm, or perhaps 4–6 phi) and small dust (fine and very fine silt, 2–8 µm, 7–9 phi). Loess is made from large dust.  相似文献   

封顶覆盖黄土气体渗透特性测试及填埋气一维运移分析     

杨益彪  詹良通  王顺玉  陈云敏  赵云飞 《岩土力学》2015,36(7):1973-1980

黄土在我国西北地区广泛分布,是当地垃圾填埋场封顶覆盖层的主要材料,该材料的气体渗透特性直接影响了覆盖层对填埋气释放的控制效果。利用渗析技术和自制的气体渗透系数测量装置,模拟和测试了干湿气象条件下覆盖黄土服役含水率变化及其对气体渗透系数的影响,并建立填埋气在垃圾体和覆盖层中的一维稳态运移模型,分析了覆盖层气体渗透系数和抽气速率对填埋气释放控制效果的影响。研究结果表明：渗析技术能有效模拟覆盖黄土服役含水率的变化,压实黄土试样的气体渗透系数介于10-17～10-12 m2量级,随服役含水率的增加而降低,且对于压实度比较高的黄土降低得更加明显;覆盖层底部的填埋气压随气体渗透系数的减小而增大,通过覆盖层下部的气体扩散层负压抽气等措施,可有效减小覆盖层底部气压和填埋气的释放量。  相似文献   

西安地区地裂缝带Q3原状黄土流变特性试验研究     

邓亚虹  李丽  慕焕东  王鹏  李飞霞 《岩土力学》2015,36(7):1847-1855

汾渭盆地是我国乃至世界上地裂缝最为发育、灾害最为严重的地区。考虑在漫长的地质历史过程中黄土的流变特性对地裂缝破裂扩展模式的影响,采用分级循环加卸载方式,对西安地区长安地裂缝（fc1）带Q3原状黄土进行了不同围压下的固结不排水三轴流变特性试验,得到了地裂缝带Q3原状黄土的蠕变加、卸载曲线和应变速率与时间关系曲线。试验结果表明,不同围压下地裂缝带Q3原状黄土表现为低应力下为减速蠕变,高应力下为减速蠕变和等速蠕变的特征。并基于统一流变力学模型理论,建立了适用于西安地区地裂缝带Q3原状黄土的三维蠕变本构模型,获得了相应的本构模型参数。该成果为研究隐伏地裂缝破裂扩展模式及其力学机制奠定了基础。  相似文献   

Chronology of the Holocene loess-paleosol section and its deposition and pedogenesis on the south of Chinese Loess Plateau     

JIA Yaofeng  HUANG Chunchang  PANG Jiangli  NIU Junjie 《地理学报》2008,18(4):425-442

Optically stimulated luminescence (OSL) dating for polymineral fine-grained loess samples, collected in Laoguantai (LGT) section on the south of the Chinese Loess Plateau, was made by application of single-aliquot regenerative-dose (SAR) protocol. A ‘Double-SAR’ procedure in which aliquots are subjected to both infrared (IR) and blue stimulations was used, and two sets of equivalent dose (De) determinations were produced and assumed to relate predominantly to feldspathic and quartz fine grain populations respectively. The OSL ages estimated from IRSL signals are smaller than those estimated from [post-IR] OSL signals due to the anomalous fading of feldspar IR signals, based on fading experiment. The young ages of the samples near ground surface may be originated from the post-depositional disturbance by the intensifying humanity’s cultivation since 3.0 ka BP in the Guanzhong Basin, south of the Chinese Loess Plateau. Based on OSL dating, as well as field observations and stratigraphic correlation, we determine the chronology of the LGT loess-paleosol sequence. In combination with climate proxy records, it is indicated that aeolian loess deposition and pedogenesis underwent polyphase changes during the Holocene, likely to have been driven by shifts in the East Asian monsoon. This suggests that aeolian loess deposition is episodic and highly variable, with contributions from non-aeolian processes such as alluvial deposition found in the area.  相似文献   

Chemical weathering intensity and element migration features of the Xiashu loess profile in Zhenjiang, Jiangsu Province     

CHEN Yingyong  LI Xusheng  HAN Zhiyong  YANG Shouye  WANG Yongbo  YANG Dayuan 《地理学报》2008,18(3):341-352

The chemical weathering intensity and element migration features of the Xiashu loess profile in Zhenjiang are studied in this paper. (1) The Xiashu loess profile underwent moderate chemical weathering. It seems that the precipitation is a more important factor than the temperature in controlling the process of the chemical weathering. (2) The major elements such as Si, K, Na, Ca, Mg, Mn and P were migrated and leached, while the elements Fe and Ti were slightly enriched. The migration features of the major elements reveal that the Xiashu loess finished the primary process of chemical weathering characterized by leaching of Ca and Na, and almost reached the secondary process characterized by leaching of K. Except the elements Sr and Ga, other trace elements such as Th, Ba, Cu, Zn, Co, Ni, Cr and V were enriched. It might be caused by both the biogeochemical process and the adsorption of trace elements by clay mineral and organic materials. (3) The difference of element migration down the Xiashu loess profile reveals that the climate was warm and wet at the early-middle stage of the middle Pleistocene. At the end of the middle Pleistocene, it became dry and cool. At the early stage of the Late Pleistocene, the paleoclimate became warm and wet again. As a whole, the paleoclimate generally became drier and cooler in this region from the beginning of the middle Pleistocene.  相似文献   

第四纪加积型红土与黄土的风成相似性探讨   总被引：8，自引：0，他引：8  

杨立辉  叶玮  朱丽东  崔嫱  王俊荆  李凤全 《干旱区地理》2008,31(3):341-347

粒度分析表明,第四纪加积型红土的粒度组成特征与黄土相似,其粒度组成以50 μm以下的粉沙和粘土组分为主,并且10～50 μm的风尘基本组分含量与黄土类似,该类型红土粒度组成存在明显的由北向南粘粒含量增加的空间变化规律;粒度组成的频率曲线研究表明,第四纪加积型红土主要呈现双峰和多峰的特征,表明其搬运营力的多元性,与西风区黄土类似;该类红土的稀土元素丰度以及Sr、Nd同位素组成也与北方风尘沉积相似.因此提出该类红土可称之为加积型红土,它与北方风成沉积存在风成相似性.  相似文献   

石碑塬滑坡黄土液化特征及其影响因素研究   总被引：1，自引：0，他引：1  

张晓超  黄润秋  许模  裴向军  韩祥森  宋丽娟  张帆宇 《岩土力学》2014,35(3):801-810

石碑塬滑坡是1920年海原地震触发的大型黄土流滑,认识其破坏特征与发生机制对于黄土边坡长距离液化失稳机制的研究非常重要。对石碑塬黄土滑坡的调查和研究表明,饱和黄土或高含水率黄土具有很高的液化势和流态破坏势,在强震作用下,饱和黄土易发生液化或流滑。对石碑塬滑坡的7组原状黄土样品进行振动三轴剪切试验,并结合其微观特征分析,探讨了循环振动荷载作用下的饱和黄土孔隙水压力-应变增长模型,分析了振动液化过程中液化应力比与黄土粒度组成、土体微观结构参数及饱和度之间的关系。结果表明：黏粒含量越低,振动作用下饱和黄土孔隙水压力响应越快,液化应力比越低;黄土孔隙比越大,孔隙结构分形维数越大,液化应力比越低,振动液化后黄土孔隙分形维数降低,结构较液化之前更为致密;饱和度对黄土粒间胶结物质的赋存状态及黄土结构强度影响很大,同一土体饱和度越高,溶滤于孔隙水中的离子浓度越高,土体粒间接触点（或胶结点）越容易发生断裂,使得黄土结构强度降低,液化应力比降低。  相似文献   

黄土地基掏挖扩底基础抗拔试验研究     

鲁先龙  乾增珍  崔强 《岩土力学》2014,35(3):647-652

随着西部电网建设的发展,越来越多的架空输电线路需经过黄土地区。输电线路杆塔基础抗拔能力通常是其设计控制条件。掏挖扩底基础因具有较好的抗拔承载性能而在黄土地区输电线路工程中得到广泛应用。根据甘肃黄土地区2个试验场地12个掏挖扩底基础实测上拔荷载位-移曲线,分别采用Chin双曲线模型以及初始直线斜率法、双直线交点法和L1-L2方法确定了基础抗拔极限承载力及其对应位移,得到了抗拔基础归一化荷载-位移曲线,采用归一化荷载-位移双曲线模型对试验结果进行拟合,给出了不同保证概率下基础荷载-位移预测曲线。结果表明：初始直线斜率法得到的承载力最小,双直线交点法次之,Chin数学模型法最大,宜采用L1-L2方法确定黄土地基掏挖扩底基础抗拔承载性能;荷载-位移曲线归一化处理可显著减小实测荷载-位移曲线的离散性,按双曲线拟合参数a、b均值确定的归一化荷载-位移曲线代表了试验平均值,而试验荷载-位移曲线刚度远大于95％保证概率的预测曲线。  相似文献