三维激光扫描技术在宁化天鹅洞改造测量中的应用     

王汉顺 《测绘与空间地理信息》2020,(3):169-172

三维激光扫描技术是目前最先进的测绘数据获取方式之一,它采用非接触主动测量方式直接获取高精度的三维数据,能够对任意物体进行扫描,快速将现实世界的信息转换成计算机可处理的三维数据信息,与传统测绘技术相比,除了速度快、精度高的优势外,更有获取对象信息更全面、提供的测绘成果更丰富更直观的突出技术特点。本文以宁化天鹅洞改造测量项目为例,探讨了三维激光扫描技术在地下溶洞改造测量工作中的应用原理、工作流程、成果类型及其技术优势,希望对同类工程项目应用有一定借鉴作用。  相似文献   

分形岩石裂隙中渗流扩散运动的试验研究     

崔溦  邹旭  李正  江志安  谢武 《岩土力学》2020,41(11):3553-3562

由于存在大量粗糙不规则裂隙，使得岩体中流体运动极为复杂。针对天然粗糙岩石裂隙渗流试验存在物理模型隐蔽性和不可重复性等难点，基于三维Weierstrass-Mandelbrot分形函数构建了粗糙节理面的裂隙通道，采用3D打印技术获得了透明精细的裂隙模型，使用微流体控制仪研究了不同试验条件下的裂隙渗流扩散运动，分析了裂隙通道流量与压力水头、裂隙宽度和分形维数之间的关系。研究结果表明：与平行板立方定律近似，在分形裂隙中，裂隙通道流量与压力水头成线性关系；单宽流量与裂隙通道的宽度成近似的三次方关系；考虑分形维数影响时，相同条件下流过裂隙通道的流量随着分形维数的增加而增加；粗糙裂隙渗流立方定律可采用与分形维数相关的幂指数函数进行修正。  相似文献   

基于新型单相MICP技术改性黏性土力学特性的试验研究     

张宽  唐朝生  刘博  张天生  程青  施斌 《工程地质学报》2020,28(2):306-316

微生物诱导碳酸钙沉积(MICP)是一种绿色低碳的新型土体改性技术.该技术当前主要适用于渗透性较好的砂土,普遍使用两相处理方法,即菌液和胶结液分开施用.然而,对于渗透性相对较差的黏性土,传统的两相处理方法难以适用.为此,引入新的单相胶结方法,即菌液和胶结液混合施用,通过调节溶液的初始pH值为细菌水解作用提供窗口期,避免微生物絮凝阻塞孔隙,使混合液均匀分布于土体一定深度范围内,从而达到显著提升胶结效果的目的.利用喷洒法将混合液喷洒至土体表层进行MICP处理,处理完成后使用超微型贯入仪SMP-1测试土体表层不同深度处的结构强度,分析土体力学特性的空间差异,对土体的胶结效果进行定量评价.此外,探究了胶结液浓度(0.2M、0.5M和1.0M)及胶结方法(调节pH与否)对于土体结构强度及MICP改性效果的影响.结果表明:采用单相MICP技术对黏性土进行改性,能够显著提高其结构强度,具有较好的适用性;在不高于1.0 M的胶结液浓度范围内,黏性土的胶结效果随着胶结液浓度增加而提升;相比较而言,调节pH的单相胶结方法对于提升土体胶结的深度和均匀性有明显积极作用.新型单相MICP技术简单易行,能够节约成本,在黏性土表层加固方面具有潜在推广应用价值.  相似文献   

Researching and Teaching the Anthropocene     

Kenneth R. Young 《Geographical review》2019,109(2):258-264

  相似文献   

基于动态极坐标参数化的遥感影像匹配方法     

孙嘉玉  左正康  孙逸渊  SanaUllah  张瑞华  赵海盟 《地球信息科学学报》2019,21(10):1586-1593

图像匹配作为三维重建至关重要的环节,其精度直接影响了平差优化、正射校正等模块的精度。对于城镇、农场等特征密集型区域,特征距离小,相似性强,易于匹配图像;而针对草地、沙漠等特征不明显区域,特征距离大,如果使用特征点匹配的方法,严格阈值下难以获得足够数量的匹配对,放宽阈值又将引入较多误匹配对,这也是导致稀疏点云不够均匀的原因之一。在此场景下,本文提出了基于动态极坐标参数化的无人机正视影像匹配算法,首先对图像做极坐标参数变化,采用动态策略解决极轴方向采样不均匀的问题,使用最小二乘法对得到的极坐标影像对做位移方向上的匹配,匹配后得到的旋转量和平移量,将该结果和SIFT算法的结果做比较。本文设计了2组实验,即参数已知的解算实验和参数未知的解算实验,且每组实验进行3次。在同等配置的计算机上,对两张7360像素×5400像素,32位的影像,本文方法的位姿解算时间相比SIFT的时间减少约57%,二者求得的位姿差通常小于1%。结论表明二者的结果在精度上表现相当,在时间上明显优于SIFT算法,具有实际的应用价值。  相似文献   

再探温跃层有孔虫B/Ca与温度和[CO₃^2-]的依赖性及其在24 ka以来热带西太平洋次表层碳酸盐系统重建中的应用     

郭景腾  李铁刚  熊志方  仇晓华  常凤鸣 《海洋学报(英文版)》2019,38(9):71-86

The B/Ca ratio of planktonic foraminifer shells has been used as a proxy for reconstructing past ocean carbonate chemistry. However, recent studies have revealed significant uncertainties associated with this proxy, such as whether seawater temperature or [ CO_3~(2-)] is the dominant control on the partition coefficient(K_D) of planktonic foraminiferal B/Ca. To address these uncertainties and thus improve our understanding of the planktonic foraminiferal B/Ca proxy, we analysed B/Ca ratios in the tests of Neogloboquadrina dutertrei(300–355 μm) and Pulleniatina obliquiloculata(355–400 μm) in surface sediment samples from the tropical western Pacific and South China Sea. The relationship between these B/Ca ratios and bottom water calcite saturation states(Δ[ CO_3~(2-)]) is weak, thus suggesting only a small dissolution effect on the B/Ca of the two species. The correlation coefficients(R~2) between the B/Ca ratios of N. dutertrei and P. obliquiloculata and environmental parameters(e.g., temperature, salinity, phosphate, DIC and ALK) in the tropical western Pacific and South China Sea are not high enough to justify using B/Ca ratios as a palaeoenvironmental proxy in the study areas. The significant correlation between K_D values of N. dutertrei and P. obliquiloculata and carbonate system parameters(e.g.,[ CO_3~(2-)], DIC, ALK, pH and [ HCO_3~-]) in the study area reflect chemical links between the K_D denominator and these variables. Based on our surface sediment calibration, an empirical relationship between the K_D of N.dutertrei and temperature is proposed in the tropical western Pacific. We also generated a record of B/Ca ratios in N. dutertrei(300–355 μm) from Core MD06-3052 in the tropical western Pacific over the past 24 ka to evaluate the application of the revised B/Ca proxy method. Based on the reconstructed empirical relationship for B/Ca and subsurface seawater ALK, we estimated subsurface seawater carbonate system parameters in the tropical western Pacific since 24 ka. In general, the estimated subsurface seawater pH and [ CO_3~(2-)] show an increase with time, and the record of subsurface seawater pCO_2 shows a decrease with time, in the tropical western Pacific over the past 24 ka. The consistent trends in subsurface seawater pCO_2 and opal flux during deglaciation may imply that the reported increase in subsurface water pCO_2 in the study area was promoted by enhanced upwelling in the Southern Ocean.  相似文献   

可见光下Li+/CNTS-TiO2光催化剂降解海洋柴油污染的研究          下载免费PDF全文

于晓彩  王力萍  刘京华  郭美岑  朱婉婷  廖佳琪  吴云英 《海洋学研究》2019,37(1):52-58

通过溶胶-凝胶法,以CNTS-TiO₂为前驱物制备了Li⁺掺杂CNTS-TiO₂的纳米复合光催化剂(以下均称为Li⁺/CNTS-TiO₂),采用X射线衍射(XRD)、扫描电镜(SEM)等测试手段对光催化剂进行表征,结果表明制得的催化剂为纳米材料且在TiO₂的基础上增大了比表面积。利用掺杂量为3%的Li⁺掺杂CNTS-TiO₂复合光催化剂(以下均称为3%Li⁺/CNTS-TiO₂)光催化降解海洋柴油污染,在可见光条件下考察了Li⁺掺杂量、煅烧温度、光催化剂投加量、柴油初始质量浓度、光催化反应时间、H₂O₂质量浓度等条件对光催化实验的影响。进行正交实验,确定最优化工艺条件为:Li⁺掺杂量为3%,光催化剂的煅烧温度为600 ℃,3%Li⁺/CNTS-TiO₂的投加量为0.1 g/L,降解柴油初始质量浓度为0.4 g/L,光催化反应时间为3 h,H₂O₂质量浓度为0.6 g/L,降解率可以达到95%以上。同时对此光催化剂进行应用试验,试验结果表明光催化剂去除效果优异,去除率可达91.87%。  相似文献   

A stochastic method for the prediction of icebreaker bow extreme stresses     

《Applied Ocean Research》2019

It is well established that the ship-ice interaction process is quite complex and associated ice loads on the icebreaker hull is a stochastic process. Obviously, novel accurate statistical methods and models should be developed and applied to estimate extreme bow stresses.This paper studies icebreaker bow stresses based on measured distribution of ice thickness in the Arctic Ocean on the way to and from the North Pole. Since the vessel route was carefully selected searching for easier ice conditions, the Arctic Ocean crossing was not a straight linear but a meandering path. Thus, the specific ship route data was biased with respect to general ice statistics in the region, but true with respect to the route specific ice data encountered by a ship navigating in that region. Therefore the route specific ice thickness data is directly needed for ship design and navigation analysis. It is assumed that captains are competent and knowledgeable, and therefore will select a route that provides the most favourable ice conditions.This paper contributes to study of the newest Chinese self-designed polar icebreaker, serving the purpose of enhancing icebreaker operational reliability. Finite Element Method software package ANSYS/LS-DYNA has been employed to simulate bow stress pattern for a particular icebreaker operating in the Arctic Ocean. Extreme bow stresses were estimated using Naess-Gaidai method. The latter is a first application of Naess-Gaidai method to a distribution with lower bound. Thus this paper aims at introducing an efficient method of estimating route-specific icebreaker extreme bow stresses.  相似文献   

Reservoir architecture and heterogeneity distribution in floodplain sandstones: Key features in outcrop,core and wireline logs     

Luis Miguel Yeste  Augusto N. Varela  César Viseras  Neil D. Mcdougall  Fernando García-García 《Sedimentology》2020,67(7):3355-3388

  相似文献   

新型移动三维激光扫描技术在盾构管片椭圆度检测中的应用     

李军  高涛 《测绘通报》2019,(12):159-162

铁运营阶段对隧道结构的变形监测保证了地铁运行的安全，而椭圆度检测是地铁隧道结构检测的重要工作。本文简单介绍了传统椭圆度检测的基本方法，分析了新型移动三维激光扫描检测系统基本原理及隧道椭圆度检测的方法和处理流程。通过工程案例实际应用以及对检测结果的综合分析，证明了移动三维激光扫描技术在盾构管片椭圆度检测中的优势。  相似文献