Variable P–T paths and HP-UHP metamorphism in a Precambrian terrane,Gridino, Russia: Petrological evidence and geodynamic implications     

《Gondwana Research》2014,25(2):614-629

The Gridino Complex represents one of the oldest eclogite-facies terranes on Earth. It consists of blocks, boudins and lenses of eclogites, pyroxenites, and epidosites as well as deformed eclogitized dikes within biotite-amphibole gneisses. Detailed petrological studies of the pyroxenites and different types of eclogites reveal considerable diversity in metamorphic pressure (P) – temperature (T) conditions (from 1.3 GPa at 660 °C to 3.0 GPa at 660 °C) and fluid regimes (wet vs. dry) experienced by these rocks. Dike-related rocks escaped prograde metamorphism and reached higher pressures than the lenses and blocks that experienced considerable prograde metamorphic reworking. The variability in P–T conditions and the shapes of P–T paths are in agreement with the results of thermomechanical modeling and data from (U)HP metamorphic rocks exhumed during continent–continent collision in the Phanerozoic. The T/P ratio estimated for an eclogitized dike from Eclogitovii Island of the Gridino Complex corresponds to the gradients of < 350 °C/GPa attributed to high-pressure (HP)–ultrahigh-pressure (UHP) metamorphic belts, which are often considered as representative of modern style plate tectonics operating in the Phanerozoic Eon. The data presented in this paper suggest that occurrences of HP-UHP metamorphic terrains might be extended back towards the time of either the assembly of Columbia in the Paleoproterozoic or Kenorland in the Neoarchean.  相似文献   

The Meso-Neoarchaean Belomorian eclogite province: Tectonic position and geodynamic evolution     

《Gondwana Research》2014,25(2):561-584

The aim of this paper is to review the main features of the Meso-Neoarchaean Belomorian eclogite province (BEP) in the northeastern Fennoscandian Shield, including regional and local geology, geochemistry, petrology and geochronology and to compare the Belomorian eclogites with Precambrian eclogites elsewhere. Two eclogite associations have been recognized within Belomorian TTG gneisses: (1) the subduction-type Salma association and (2) Gridino eclogitized mafic dykes. Protoliths of the Salma eclogites represent a sequence comprising gabbro, Fe–Ti gabbro and troctolites, formed at ~ 2.9 Ga in a slow-spreading ridge setting (like the Southwest Indian Ridge). The main subduction and eclogite-facies events occurred between ~ 2.87 and ~ 2.82 Ga. Injection of mafic magma into an active continental margin setting, recorded by the Gridino dyke swarm, is attributed to subduction of a mid-ocean ridge, commencing at 2.87 Ga. Crustal delamination of the active margin and subsequent involvement of the lower crust in subduction between 2.87 and 2.82 Ga ago caused high-pressure metamorphism of the Gridino dykes, culminating in eclogite-facies conditions between 2.82 and 2.78 Ga and accompanying amalgamation of the Karelia, Kola and Khetolamba blocks and formation of the Mesoarchaean Belomorian accretionary–collisional orogen. The clockwise P–T paths of the Salma and Gridino associations cross the granulite-facies P–T field. Detailed metamorphic studies indicate a complicated post-eclogite history with thermal events and fluid infiltration, related to plume activity at 2.72–2.70, ~ 2.4 and ~ 1.9 Ga. The eclogite assemblages were exhumed to mid-to-lower crustal depths at ~ 1.7 Ga, while erosion or younger tectonic events were responsible for final exhumation to the surface. Comparison of P–T–t paths and data for peak metamorphic parameters demonstrates the general similarity of the Archaean and Palaeoproterozoic eclogites worldwide and their association with anomalously “hot” environments. The occurrence of high-T conditions during eclogite-facies metamorphism can be attributed to either subduction of a mid-ocean ridge (Archaean, BEP) or to interaction with mantle plumes (Proterozoic).  相似文献   

Evolution of neotectonic activity of East Anatolian Fault System (EAFS) in Bingöl pull-apart basin,based on fractal dimension and morphometric indices     

《Journal of Asian Earth Sciences》2014

This study is an attempt of a semi-automatic geomorphological GIS analysis based on morphometric indices. In the study, 10-m-resolution Digital Elevation Models (DEMs) are used to assess the neotectonic signals regarding the recent topographic developments and to attach additional significance to active tectonics in the Bingöl basin area. The methodology incorporates the determination of the structural similarities of the faults in the basins using fractal concepts and the application of four morphometric indices (Stream Power Index (SP), Multi-resolution Index of Valley Bottom Flatness (MRVBF), Terrain Ruggedness Index (TRI) and Valley Width-to-Height Ratio (Vf)). In order to detect the deviation from spatial randomness of the applied indices, the weighted correlation coefficient Moran’s I is used and the results are interpreted at a confidence interval of 99%. The spatial distribution of integrated index values is evaluated with the tectonically active fault zones in order to determine the probable activity and the structural deformation in the basin.The applied methodology reveals that the fractal analysis of the fault lines and the spatial analysis of the morphometric indices proved to be effective tools in analyzing the tectonic influence of the fault system on the basin area. Within the basin area, a relatively lesser degree of tectonic activity is observed, in contrast with the high tectonic activity outside the basin.  相似文献   

The Deccan Trap – Cretaceous–Paleogene boundary connection; new 40Ar/39Ar ages and critical assessment of existing argon data pertinent to this hypothesis     

《Journal of Asian Earth Sciences》2014

The Cretaceous–Paleogene boundary (KPgB) was dated by the ⁴⁰Ar/³⁹Ar method herein from the western interior of North America at 65.48 ± 0.12 Ma (1σ), in good agreement with other recent published estimates. For the Deccan Traps, India, new argon ages as well as others available in the literature, are assessed for reliability based on (a) statistical reliability of plateau/isochron sections and (b) freshness of material dated utilizing the alteration index method. From tholeiitic lavas from the Composite Western Ghats Section (CWGS), only six ages are found to be reliable estimates of the time of crystallization. These ages along with the magnetic polarity of the lavas agree with the geomagnetic polarity time scale (GPTS) at ∼67–64 Ma. Alkaline rocks from the Anjar area of Kutch, provide three reliable ages that suggest a hiatus in lava extrusion around KPgB. For the Rajahmundry basalts, the upper flow’s age defines its formation during chron 29n; a single age from the lower reversed polarity flow appears somewhat dichotomous when plotted against the GPTS. The reliable lava ages indicate the most voluminous (reversed polarity) sections of the CWGS were extruded at a time statistically indistinguishable from that of the KPgB. The Deccan Trap – KPgB faunal extinction hypothesis remains plausible, but must compete with the latest report, favoring a very close temporal connection (∼0.03 m.y.) between the Chixculub (Impact) Crater and the KPgB.  相似文献   

Molecular and stable carbon isotopic compositions of saturated fatty acids within one sedimentary profile in the Shenhu,northern South China Sea: Source implications     

《Journal of Asian Earth Sciences》2014

This study examined the distributions and stable carbon isotopic compositions of saturated fatty acids (SaFAs) in one 300 cm long sedimentary profile, which was named as Site4B in Shenhu, northern South China Sea. The concentrations of total SaFAs in sediments ranged from 1.80 to 10.16 μg/g (μg FA/g dry sediment) and showed an even-over-odd predominance in the carbon chain of C₁₂ to C₃₂, mostly with n-C₁₆ and n-C₁₈ being the two major components. The short-chain fatty acids (ScFAs; n-C₁₂ to n-C₁₈) mainly from marine microorganisms had average δ¹³C values of −26.7‰ to −28.2‰, whereas some terrigenous-sourced long-chain fatty acids (LcFAs; n-C₂₁ to n-C₃₂) had average δ¹³C values of −29.6‰ to −34.1‰. The other LcFAs (n-C₂₄ & n-C₂₆ ∼ n-C₂₈; average δ¹³C values are −26.1‰ to −28.0‰) as well as n-C₁₉ and n-C₂₀ SaFAs (average δ¹³C values are −29.1‰ and −29.3‰, respectively) showed a mixed signal of carbon isotope compositions.The relative bioproductivity calculation (marine vs. terrigenous) demonstrated that most of organic carbon accumulation throughout the sedimentary profile was contributed by marine organism. The high marine productivity in Shenhu, South China Sea may be related to the hydrocarbon seepage which evidenced by diapiric structures. Interestingly, there is a sever fluctuation of terrigenous inputs around the depth of 97 cm below the seafloor (bsf), probably resulting from the influence of the Dansgaard–Oeschger events and the Younger Dryas event as revealed by ¹⁴C age measurements.  相似文献   

Accuracy and efficiency of time integration methods for 1D diffusive wave equation     

Sylvain Weill  Raphael di Chiara-Roupert  Philippe Ackerer 《Computational Geosciences》2014,18(5):697-709

The diffusive wave approximation of the Saint-Venant equations is commonly used in hydrological models to describe surface flow processes. Numerous numerical approaches can be used to solve this highly nonlinear equation. Nonlinear time integration schemes—also called methods of lines (MOL)—were proven very efficient to solve other nonlinear problems in geosciences but were never considered to deal with surface flow modeling with the diffusive wave equation. In this paper, we study the relative performance of different time and space integration schemes by comparing the results obtained with classical approaches and with nonlinear time integration approaches. The results show that (i) the integration method with a higher order in space shows high accuracy regarding an integrated indicator such as the global mass balance error but is less accurate regarding local indicators, and (ii) nonlinear time integration techniques perform better than classical ones. Overall, it seems that integration techniques combining nonlinear time integration and a low spatial order need to be considered when developing hydrological modeling tools owing to their simplicity of implementation and very good performance.  相似文献   

The Early Pliocene reflooding in the Western Mediterranean: New insights from the rias of the Internal Rif,Morocco     

《Comptes Rendus Geoscience》2014,346(3-4):90-98

New field and micropalaeontological investigations have been conducted in four of the Pliocene rias of the internal zone of the Rif in Morocco, on the southern margin of the Alboran Sea. We found that marine sediments outcropping in these rias were deposited mainly during the Early Zanclean, between 5.04 and 3.8 Ma. After a transgressive episode that led to the deposition of terrestrial to marine conglomerates, dark clays deposited first at shallow palaeo-depths and then at bathyal palaeo-depths. The rias were then infilled with a shallowing upward succession comprising marine clays and sandstone and, locally, terrestrial sediments that indicate their final emersion. No Gilbert-deltas were observed in these rias. The presence of transgressive deposits at the bottom of the rias, also identified in other basins of the external zone of the Rif, and the absence of Gilbert deltas question a catastrophic reflooding after the Messinian Salinity Crisis in this area.  相似文献   

Jump conditions and dynamic surface tension at permeable interfaces such as the inner core boundary     

《Comptes Rendus Geoscience》2014,346(5-6):110-118

We consider a fluid crossing a zone of rapid density change, so thin that it can be considered as a density jump interface. In this case, the normal velocity undergoes a jump. For a Newtonian viscous fluid with low Reynolds number (creeping flow) that keeps its rheological properties within the interface, we show that this implies that the traction cannot be continuous across the density jump because the tangential stress is singular. The appropriate jump conditions are established by using the calculus of distributions, taking into account the curvature of the interface as well as the density and viscosity changes. Independently of any intrinsic surface tension, a dynamic surface tension appears and turns out to be proportional to the mass transfer across the interface and to a coefficient related to the variations of density and viscosity within the interface. Explicit solutions are exhibited to illustrate the importance of these new jump conditions. The example of the Earth's inner core crystallisation is questioned.  相似文献   

First African diamonds discovered in Algeria by the ancient Arabo-Berbers: History and insight into the source rocks     

《Comptes Rendus Geoscience》2014,346(7-8):179-189

  相似文献   

Calcium,Na, K and Mg Concentrations in Seawater by Inductively Coupled Plasma‐Atomic Emission Spectrometry: Applications to IAPSO Seawater Reference Material,Hydrothermal Fluids and Synthetic Seawater Solutions     

Philippe Besson  Jefferson Degboe  Benjamin Berge  Valérie Chavagnac  Sébastien Fabre  Gilles Berger 《Geostandards and Geoanalytical Research》2014,38(3):355-362

We report a measurement procedure to determine simultaneously the major cation concentrations (Na, Ca, K and Mg) of seawater‐derived solutions by inductively coupled plasma‐atomic emission spectrometry. The best results were obtained when the IAPSO (‘standard’) seawater reference material was diluted by thirty times with Milli‐Q^® water. We obtained an average reference value r_K (the ratio of the mass fraction of potassium to that of chlorine, i.e., (g kg^?1)/(g kg^?1)) for IAPSO seawater of 0.0205 ± 0.0006 (2.9% RSD), not significantly different from 0.0206 ± 0.0005 (2.4% RSD) for seawater composition reported in the literature. The measured Na, Ca and Mg concentrations correspond to r_Na, r_Ca and r_Mg values of 0.5406 ± 0.0026 (0.5% RSD), 0.02192 ± 0.00048 (2.2% RSD) and 0.06830 ± 0.00047 (0.7% RSD), respectively, in line with previous values measured by wet‐chemistry and atomic absorption spectrophotometry or wet‐chemical titration. Our measurement procedure was used successfully on synthetic seawater solutions and high‐temperature hydrothermal fluids.  相似文献