结合变差纹理特征的极化SAR建筑物震害信息提取          下载免费PDF全文

肖修来  翟玮  郭晓  张皓然 《地震工程学报》2020,42(2):568-578

快速评估建筑物地震灾害信息对地震应急救援工作有着指导意义,而极化SAR具有全天候、全天时的特点,因此利用极化SAR图像提取震害信息已逐渐成为研究热点。虽然极化SAR具有丰富的极化信息,但其纹理信息不可忽略,尤其是完好的人工建筑物在图像上呈现规则的纹理特征,而倒塌建筑区域纹理分布杂乱,因此结合纹理信息也可以很好地提取建筑物信息。以2010年玉树地区的全极化SAR数据为研究对象,首先,利用Yamaguchi分解的体散射分量PV提取了SAR图像中的建筑物区域以及道路、水系等非建筑物信息,在此基础上,对相干散射矩阵T11分量中倒塌建筑物、完好建筑区域进行变差计算,根据变差曲线确定变程a后,再对建筑物区域采取窗口m*m(m=3*a)进行变差计算得到变差纹理信息,最后利用FCM算法对变差纹理信息分别提取完好建筑物和倒塌建筑物区域,为了对比分析,文章利用Yamaguchi分解的二次散射分量PD提取完好建筑物区域,与震后光学遥感图像对应样本点进行人工验证,得到完好建筑物的提取精度为80.18%,倒塌建筑物的提取精度为84.54%,道路水系的提取精度为77.58%。  相似文献   

基于时相变化的晴空条件下Himawari-8 AHI火点检测     

鄢俊洁  瞿建华  冉茂农  张芳芳 《遥感学报》2020,24(5):571-577

Himawari-8静止气象卫星具有高空间分辨率、高观测频次和高时效特点,对于火点检测具有很强优势。对Himawari-8卫星的3.9μm和11.2μm两通道亮温进行了连续时相变化研究,得出两通道的亮温在时间上的变化差值稳定且规律明显。根据两通道的亮温时相特征,考虑白天可见光对3.9μm通道的影响,并结合火点产生时引起的亮温变化特征,提出了适用于晴空条件下改进的火点检测算法。在多处进行了此算法的实验,例如2018-11-27 T 16:40(UTC时)河北张家口市桥东区一化工厂附近发生的严重爆炸起火事件以及2019-02-28澳大利亚西南部发生的火灾事件,均快速有效的检测到了火点。实验表明,改进的火点检测算法能很好的进行火点检测,并能解决晨昏交界、冰雪下垫面、常规火源点、太阳耀光等火点检测的难题。  相似文献   

eLoran系统新型信号波形设计及其性能评估          下载免费PDF全文

李婉清  刘中伟  李实锋  叶清琳 《全球定位系统》2020,45(2):13-20

增强型罗兰导航系统(eLoran)作为全球卫星导航系统(GNSS)的备份系统,是国家定位导航授时(PNT)安全的重要基础设施.针对目前标准eLoran信号存在易受交叉干扰、天波干扰,通信数据传输速率低等的问题,本文基于标准罗兰信号体制提出了两种波形改进方法(衰减函数法与对称波形法)并对新型波形进行性能评估.实验结果表明,两种方法能够有效缩短波形持续时间,加速后沿波形下降,减小发射机功耗.对称波形法能够大幅减小波形持续时间,但缩短波形持续时间也将改变原信号波形的频谱特性,利用衰减函数法可以最大程度保证信号的频谱性能.综合分析可知,新型波形能够有效利用时域资源,空余的时间可用于增加传输信号,进而提高数据调制技术的性能.  相似文献   

微型全极化SAR海洋监测应用技术研究     

王军锋  乔明  刘子畅  吕大勇 《测绘与空间地理信息》2020,(2):88-90

我国作为海洋大国,近年来海洋事业进入快速发展时期,合成孔径雷达以其自身的技术特点在海洋遥感监测中发挥了重要的作用。在以往的海洋监测中大多采用星载合成孔径雷达获取海洋数据,但因星载SAR受到卫星搭载平台和运行轨道等因素影响,对局部地区高时效的数据获取还存在一定的制约因素。本文通过对无人机机载微型全极化合成孔径雷达对海岸带、海岛礁、海洋动目标高分辨率成像和应用分析研究,为无人机机载SAR在海洋监测中的应用提供了全新的技术手段。  相似文献   

Low‐P and high‐T metamorphism of basalts: Insights from the Sudbury impact melt sheet aureole and thermodynamic modelling     

Taus R. C. Jrgensen  Douglas K. Tinkham  C. Michael Lesher 《Journal of Metamorphic Geology》2019,37(2):271-313

Low‐pressure and high‐temperature (LP–HT) metamorphism of basaltic rocks, which occurs globally and throughout geological time, is rarely constrained by forward phase equilibrium modelling, yet such calculations provide valuable supplementary thermometric information and constraints on anatexis that are not possible to obtain from conventional thermometry. Metabasalts along the southern margin of the Sudbury Igneous Complex (SIC) record evidence of high‐grade contact metamorphism involving partial melting and melt segregation. Peak metamorphic temperatures reached at least ~925°C at ~1–3 kbar near the SIC contact. Preservation of the peak mineral assemblage indicates that most of the generated melt escaped from these rocks leaving a residuum characterized by a plagioclase–orthopyroxene–clinopyroxene–ilmenite‐magnetite±melt assemblage. Peak temperatures reached ~875°C up to 500 m from the SIC lower contact, which marks the transition to metabasalts that only experienced incipient partial melting without melt loss. Metabasalts ~500 to 750 m from the SIC contact are characterized by a similar two‐pyroxene mineral assemblage, but typically contain abundant hornblende that overgrew clino‐ and orthopyroxene along an isobaric cooling path. Metabasalts ~750 to 1,000 m from the SIC contact are characterized by a hornblende–plagioclase–quartz–ilmenite assemblage indicating temperatures up to ~680°C. Mass balance and phase equilibria calculations indicate that anatexis resulted in 10–20% melt generation in the inner ~500 m of the aureole, with even higher degrees of melting towards the contact. Comparison of multiple models, experiments, and natural samples indicates that modelling in the Na₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O₂ (NCFMASHTO) system results in the most reliable predictions for the temperature of the solidus. Incorporation of K₂O in the most recent amphibole solution model now successfully predicts dehydration melting by the coexistence of high‐Ca amphibole and silicate melt at relatively low pressures (~1.5 kbar). However, inclusion of K₂O as a system component results in prediction of the solidus at too low a temperature. Although there are discrepancies between modelling predictions and experimental results, this study demonstrates that the pseudosection approach to mafic rocks is an invaluable tool to constrain metamorphic processes at LP–HT conditions.  相似文献   

Research on Parallel Algorithms for uv-faceting Imaging     

《Chinese Astronomy and Astrophysics》2019,43(3):424-443

The uv-faceting imaging is one of the widely used large field of view imaging technologies, and will be adopted for the data processing of the low-frequency array in the first stage of the Square Kilometre Array (SKA1). Due to the scale of the raw data of SKA1 is unprecedentedly large, the efficiency of data processing directly using the original uv-faceting imaging will be very low. Therefore, a uv-faceting imaging algorithm based on the MPI (Message Passing Interface)+OpenMP (Open Multi-Processing) and a uv-faceting imaging algorithm based on the MPI+CUDA (Compute Unified Device Architecture) are proposed. The most time-consuming data reading and gridding in the algorithm are optimized in parallel. The verification results show that the results of the proposed two algorithms are basically consistent with that obtained by the current mainstream data processing software CASA (Common Astronomy Software Applications), which indicates that the proposed two algorithms are basically correct. Further analysis of the accuracy and total running time shows that the MPI+CUDA method is better than the MPI+OpenMP method in both the correctness rate and running speed. The performance test results show that the proposed algorithms are effective and have certain extensibility.  相似文献   

High-P granulites of the Songshugou area (Qinling Orogen,east-central China): Petrography,phase relations,and U/Pb zircon geochronology     

Thomas Bader  Lifei Zhang  Xiaowei Li  Bin Xia  Leander Franz  Christian de Capitani  Qingyun Li 《Journal of Metamorphic Geology》2020,38(4):421-450

High-pressure (HP) granulites provide telling records of mineral reactions at upper mantle to lower crustal levels and key information on the fate of material in subduction systems. The latter especially applies when they abut eclogite and mantle dunite because such rock associations are crucial for understanding the incompletely known processes at the interface of converging plates. A continental arc, active c. 520–395 Ma ago, formed an enigmatic example of such a rock association in the Songshugou area, Qinling Orogen. To unravel the juxtaposition of the distinct rocks, this study combines petrography, phase equilibria modelling, conventional thermobarometry, and zircon U–Th–Pb–Ti–REE analysis. Two mafic HP granulites, which contain the mineral assemblages garnet–clinopyroxene–plagioclase–rutile–mesoperthite–quartz and garnet–clinopyroxene–plagioclase–rutile, experienced peak metamorphic conditions of ≤1.4 GPa, 860°C and ~1.3 GPa, ≥910°C, respectively. During decompression and cooling, at 489 ± 4 Ma, amphibole lamellae unmixed from a clinopyroxene solid solution and orthopyroxene in part replaced garnet. A felsic HP granulite shows equilibration of garnet, perthite, antiperthite, kyanite, quartz, and rutile at 810–860°C, ~1.2 GPa, sillimanite growth during decompression, and upper amphibolite facies cooling at 510 ± 4 Ma. Though the thermobarometric data are just within the methodological errors, the U/Pb zircon ages imply the HP granulites did not evolve coherently. The HP granulites either represent foundered lower arc crust or originated from subduction erosion because their geochemistry is indistinguishable from that of the hanging-wall plate. Published and new pressure–temperature–time–deformation paths converge at ~710°C, ~0.9 GPa, and ≲470 Ma, implying exhumation tectonics juxtaposed the HP granulites with a mélange of eclogite and mantle dunite at lower crustal levels. This study highlights that lower arc crust can comprise material of diverse evolution.  相似文献   

云南广南县老寨湾金矿地质特征及找矿标志     

高李阳  顾雄  吴小梅 《云南地质》2020,(1):71-75

广南县老寨湾金矿位于滇、黔、桂“金三角”重要成矿区带上,金矿体矿体呈似层状赋存于断层构造破碎带或层间构造破碎带中,构造控矿明显。矿体围岩均为下泥盆统坡松冲组第一段(D1ps1)硅化石英砂岩;矿床成因属中-低温热液叠加改造型金矿床,断层构造、硅化等矿化蚀变及地球化学异常是重要的找矿标志。  相似文献   

金伯利岩型金刚石矿床研究及其成矿模式探讨——以辽宁瓦房店地区金刚石原生矿矿床为例     

刘礼广  吴大天  韩双  万方来  林少全  杨献忠 《地质学报》2020,94(9):2650-2665

辽宁南部瓦房店金刚石矿是国内最大的金刚石矿产区，现已发现4处金刚石成矿带、120个岩体。其中金伯利岩岩管24个、岩脉89个、可疑岩体7个，累计提交1221万克拉储量，占全国金刚石储量52%。本文主要对该矿床的金刚石母岩—金伯利岩的岩石地球化学特征进行了全面系统分析，发现金伯利岩中MgO、NiO、Cr 2O 3的含量与TiO 2、Al 2O 3、Na 2O、K 2O、CaO、P 2O 5等偏碱性组分呈正相关关系；Ni、Cr、Co含量与金刚石含量呈正相关，而Ti、Zr、Ba元素含量与金刚石含量呈负相关。通过对瓦房店矿区金刚石中石榴石及单斜辉石包裹体、橄榄石- 石榴石矿物对、石榴石微量元素、尖晶石- 橄榄石等多种地质温、压计归纳得出金刚石矿的来源深度为150~210 km,压力5~7 GPa，温度1083~1261℃，在上述温、压条件下，结合岩浆化学组成，估算金伯利岩具有低氧逸度(fO 2=2. 913×1. 01325×10-6Pa)的特点。结合野外勘查工作，总结了该矿床的地质特征、控矿构造、矿体空间分布规律等要素，认为NEE向和NE向断裂控制着金伯利岩体的展布方向和矿体形态。脉状金伯利岩体一般呈NEE 70°~80°方向展布，严格受NEE至近EW向的密集节理或裂隙控制。提出了金刚石母岩—金伯利岩是由源于上地幔岩浆，在一定的封闭条件下，受构造与岩性双重控制，多期性的爆发与侵入交替作用所形成，并建立了具有较高氧逸度和较高密度的流变性软流圈，通过渗滤熔体浸蚀岩石圈形成金刚石的理想成因模式，希望为下一步找矿工作提供参考。  相似文献   

河北省怀安县朱家洼矿区地球化学特征与找矿方向     

王占彬 《地质与勘探》2020,56(1):102-112

河北怀安朱家洼矿区位于华北板块北缘中段太古宙、元古宙、中生代金银铅锌铁硫铁矿成矿带,为火山热液型金多金属矿。为查明该区成矿规律,明确找矿方向,在区内开展了水系沉积物测量、土壤地球化学测量等工作。通过对元素分布、元素相关性、元素异常等特征研究表明,Au、Mo为本区主成矿元素;各元素异常平面分布具有分带性,高温元素W、Sn、Bi异常位于骆驼山火山机构中心,中低温元素Pb、Zn、As、Ag等异常分布于火山机构边部及周边围岩中,成矿元素Au、Mo异常主要位于火山机构西侧围岩中。异常查证发现金钼矿化体2条,金钼矿化受火山机构和北西向构造带控制。依据成矿地质条件、地球化学异常及查证成果认为,朱家洼矿区Au、Mo成矿潜力大,火山机构西侧围岩区是该区重点找矿地段。  相似文献