Study on multiple induced polarization parameters in groundwater exploration in Bashang poverty alleviation area of Heibei Province,China          下载免费PDF全文

LIU Zhi-yuan  TAN Ding  CHEN Zhi-bin  WEI Yun-fei  CHAI Quan  CHEN Xiao-hang 《地下水科学与工程》2020,8(3):274-280

The study examines a water exploration and poverty alleviation project in Guyuan county. The study analyzes correlations between aquifers and multiple induced polarization (IP) parameters, including resistivity, polarizability, deviation, half decay time, water-bearing factors, and Kc, a new parameter refined in this study. Based on the study, the well was placed accurately, and its maximum water inflow reached 30 m³/h. Kc value highlights the rate of change at early stages of IP secondary field. Kc value served as a quick indicator in this groundwater prospecting and is validated in practice. Progress has been made in finding new parameters in exploring water with IP method. Thanks to the project, local people have access to water and poverty alleviation has scored some achievements.  相似文献   

2018年云南通海MS5.0和墨江MS5.9地震前地磁垂直强度极化异常时空特征研究     

樊文杰  姚休义  廖晓峰 《中国地震》2020,36(2):276-283

利用云南11个地磁台站的秒采样观测数据，计算和分析了地磁垂直强度极化值Y_zh在2019年8月13日、14日通海M_S5.0地震前及2019年9月8日墨江M_S5.9地震前的时空变化特征。研究表明，地磁台站Y_zh值的幅度在震前会出现同步增强现象。而与以往的极化震例研究相比，Y_zh值的高值异常在震前出现时间要更早些，可能会在震前2~5个月出现，距发震时间越近，产生的异常幅值可能越大，异常持续时间也越长。同时，研究还发现2次地震主要发生在异常空间等值线的高值区内，尤其在零值阈值线附近，这可能对今后发震地点的预测有一定的指示意义。对比异常产生时段内的D_st指数，认为该高值异常并非由空间电流体系所引起。  相似文献   

设计反应谱标定方法的研究现状与讨论          下载免费PDF全文

蒋晓涵  薄景山    王竞  韩昕  郭晓云  赵培培  谭启迪 《世界地震工程》2018,34(4):038-48

设计反应谱及其标定方法的研究是工程抗震研究领域的基本问题之一。在现有研究成果的基础上，归纳和总结了设计反应谱及其标定方法的研究历史和现状；评述了研究进程中的若干节点问题；介绍了设计反应谱的标定原理和当前几种有代表性的设计反应谱的标定方法；分析了设计反应谱标定参数的影响因素。在此基础上，对设计反应谱及其标定方法研究中的强震资料积累问题、谱形状问题、标定参数的确定问题以及标定方法等问题进行了讨论并提出了改进和进一步研究的建议。  相似文献   

基于一维综合孔径微波辐射计的海面温度反演研究   总被引：1，自引：0，他引：1  

艾未华  冯梦延  陈冠宇  陆文 《海洋学报(英文版)》2020,42(5):115-122

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.  相似文献   

断裂带首波研究进展          下载免费PDF全文

杨微 《地震工程学报》2019,41(6):1407-1418

断裂带首波是沿着存在物性差异界面传播的一种地震折射波,在传播过程中携带了断裂带的重要信息,对分析和研究断裂带以及附近区域的精细结构提供了一种新的分析方法。本文主要阐述断裂带首波的产生原理、波形特征、识别及分析方法等,介绍目前国际上识别及利用断裂带首波开展断裂带特征方面的研究现状,并针对地震危险区域存在物性差异的断裂带,提出可结合密集台阵观测技术,利用断裂带首波进行断裂带精细结构探测及其变化监测研究,提高潜在孕震环境及发生机理的认识水平。  相似文献   

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data     

Maofei Jiang  Ke Xu  Yalong Liu 《Marine Geodesy》2018,41(3):289-312

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献   

Calibration method affects the measured δ2H and δ18O in soil water by direct H2Oliquid–H2Ovapour equilibration with laser spectroscopy     

Hongxiu Wang  Bingcheng Si  Dyan Pratt  Han Li  Xiaojun Ma 《水文研究》2020,34(2):506-516

The direct H₂O_liquid–H₂O_vapour equilibration method utilizing laser spectroscopy (DVE-LS) is a way to measure soil pore water stable isotopes. Various equilibration times and calibration methods have been used in DVE-LS. Yet little is known about their effects on the accuracy of the obtained isotope values. The objective of this study was to evaluate how equilibration time and calibration methods affect the accuracy of DVE-LS. We did both spiking and field soil experiments. For the spiking experiment, we applied DVE-LS to four soils of different textures, each of which was subjected to five water contents and six equilibration times. For the field soil experiment, we applied three calibration methods for DVE-LS to two field soil profiles, and the results were compared with cryogenic vacuum distillation (CVD)-LS. Results showed that DVE-LS demonstrated higher δ²H and δ¹⁸O as equilibration time increased, but 12 to 24 hr could be used as optimal equilibration time. For field soil samples, DVE-LS with liquid waters as standards led to significantly higher δ²H and δ¹⁸O than CVD-LS, with root mean square error (RMSE) of 8.06‰ for δ²H and 0.98‰ for δ¹⁸O. Calibration with soil texture reduced RMSE to 3.53‰ and 0.72‰ for δ²H and δ¹⁸O, respectively. Further, calibration with both soil texture and water content decreased RMSE to 3.10‰ for δ²H and 0.73‰ for δ¹⁸O. Our findings conclude that the calibration method applied may affect the measured soil water isotope values from DVE-LS.  相似文献   

Estimating groundwater recharge for a freshwater lens in an arid region: Formative and stability assessment     

Mosaed S. Alrashidi  Ryan T. Bailey 《水文研究》2020,34(4):1063-1080

The formation of subsurface freshwater lenses on top of brackish groundwater is a fascinating hydrologic phenomenon that creates groundwater supplies of great potential value in arid regions. Information on the recharge quantity and mechanism of these lenses is both scarce and uncertain. This study examines the formation and macroscale stability of the Rawdatain freshwater lens in Kuwait, for which significant pre-development data are available. The Rawdatain is a large (150 million m³) subsurface freshwater lens overlying brackish groundwater compared to the other freshwater lenses in the Arabian Peninsula. In this study, a three-dimensional (3D) density-dependent groundwater flow model is tested against the following data targets to estimate long-term diffuse and focused groundwater recharge: (i) groundwater head, (ii) total dissolved solids (TDS) groundwater concentration, (iii) volume and vertical thickness of stored groundwater of three different water quality TDS ranges (0–700, 700–1000 and 1000–2000 mg/L) and (iv) geometrical shape features of the lens along cross-sections. To better represent the spatial variation in TDS, six different recharge zones were assigned to allocate diffuse and focused recharge conditions. Twelve recharge rate scenarios, encompassing a wide range of feasible long-term average annual recharge values (200,000–5,000,000 m³/year), were tested against the multiple targets and compared with the groundwater age of the Rawdatain lens. Based on comparison with data targets, the long-term average annual recharge is estimated to be 500,000 m³/year. Scenarios of reduced recharge, which may occur due to changes in land-use or climate, demonstrate the extremely slow response of the lens, which is in agreement with the slow development and formation of the lens (>2,000 years). Within a 100-year time frame, a 50% reduction in annual recharge reduces the lens volumes by 21, 17 and 9% for the three water quality categories, respectively. This study demonstrates the stability of freshwater lenses in arid regions and also provides methodology for similar focused rainfall recharge freshwater lenses.  相似文献   

粒子加速器中高精度丝线绝对位置测量技术研究   总被引：1，自引：0，他引：1  

梁静  罗明成  王铜  董岚  罗涛  柯志勇  王小龙 《测绘通报》2019,(9):44-50

粒子加速器中采用振动线技术进行共架单元上多块磁铁的高精度预准直，需要将振动线代表的磁中心引出进行共架单元之间的相对准直。为了获取以振动线为代表的丝线高精度空间绝对位置，本文对采用近景摄影测量技术进行点、线位置求解的方法进行了研究。利用单相机多站位的方法进行拍摄，通过标定板提供的高精度控制点坐标，采用自标定光束法平差对相机进行标定，并提出将空间直线离散成空间2点进行直线整体精确求解。对标定板上由2点组成的模拟直线进行测量验证，并与标定板提供的理论值进行对比，结果显示空间直线位置获取精度优于5 μm。这表明了本文理论和方法的正确性，为进一步研究丝线高精度空间绝对位置测量打下了基础。  相似文献   

基于投影变换的线阵旋转扫描相机标定方法     

苏琳  巫兆聪  闫钊  王鹏 《测绘通报》2019,(4):96-98,102

针对线阵旋转扫描相机标定数据难以获取及模型解算不稳定的问题，提出了一种基于投影变换的线阵旋转扫描相机标定方法。首先构建了一种新的线阵旋转扫描相机成像模型，该模型可以根据相机旋转平台参数、线阵旋转扫描相机成像平面与其切平面的位置关系将旋转扫描图像投影为框幅式图像；然后根据构建出的成像模型，采用直接线性变换法和非线性优化方法进行相机标定和参数优化。试验结果表明，此方法简单易行，具有较高的精度。  相似文献