Validation of the SCEC Broadband Platform simulations for tall building risk assessments considering spectral shape and duration of the ground motion     

Nenad Bijelić  Ting Lin  Greg G. Deierlein 《地震工程与结构动力学》2018,47(11):2233-2251

Earthquake simulation technologies are advancing to the stage of enabling realistic simulations of past earthquakes as well as characterizations of more extreme events, thus holding promise of yielding novel insights and data for earthquake engineering. With the goal of developing confidence in the engineering applications of simulated ground motions, this paper focuses on validation of simulations for response history analysis through comparative assessments of building performance obtained using sets of recorded and simulated motions. Simulated ground motions of past earthquakes, obtained through a larger validation study of the Southern California Earthquake Center Broadband Platform, are used for the case study. Two tall buildings, a 20‐story concrete frame and a 42‐story concrete core wall building, are analyzed under comparable sets of simulated and recorded motions at increasing levels of ground motion intensity, up to structural collapse, to check for statistically significant differences between the responses to simulated and recorded motions. Spectral shape and significant duration are explicitly considered when selecting ground motions. Considered demands include story drift ratios, floor accelerations, and collapse response. These comparisons not only yield similar results in most cases but also reveal instances where certain simulated ground motions can result in biased responses. The source of bias is traced to differences in correlations of spectral values in some of the stochastic ground motion simulations. When the differences in correlations are removed, simulated and recorded motions yield comparable results. This study highlights the utility of physics‐based simulations, and particularly the Southern California Earthquake Center Broadband Platform as a useful tool for engineering applications.  相似文献   

高精度直升机机载LiDAR在高速公路改扩建勘测中的应用可行性研究          下载免费PDF全文

郑伟安 《山东国土资源》2018,34(8)

机载LiDAR在公路勘测方面的用途日益广泛。该文对直升机机载LiDAR在高速公路改扩建中的应用技术路线可行性进行了研究论证,从地面控制测量、点云数据获取、点云数据处理、成果应用等多个方面进行了阐述,通过分析LiDAR点云数据在5种不同地面控制点布设方案校正下的点云数据精度,论证了利用地面控制点对直升机机载LiDAR点云数据进行平面和高程校正的可行性。  相似文献   

填充墙刚度影响的实测高层建筑增量动力分析          下载免费PDF全文

周云  裴熠麟  周祎  方亮  易伟建 《地震工程学报》2018,40(5):883-890

高层结构中的填充墙在地震作用下与周围结构构件之间的相互作用十分复杂,对建筑结构的整体抗震性能具有较大影响。然而我国规范在设计阶段通常不考虑填充墙对结构抗震性能的影响,统一采用周期折减系数来考虑其刚度变化引起的内力变化,因此准确评估填充墙对结构抗震性能的影响具有重要意义。本文在对一栋框-剪结构和一栋剪力墙高层建筑进行随机振动测试的基础上,利用Perform-3D对每栋高层分别建立了3种分析模型。其中对未考虑填充墙作用的结构模型,分别采取规范建议值和实测结果值两种方式进行周期折减。对通过添加斜撑单元来考虑填充墙作用的结构模型,利用环境激励测试识别获得的结构模态信息进行模型修正。对该3种模型进行了增量动力分析,探讨潜在危险性水平地震作用下填充墙对高层建筑抗震性能的影响。结果表明,填充墙增加了结构在弹性阶段的整体初始刚度,但随着地震动强度的增加逐渐丧失对结构刚度的贡献作用。相比考虑了填充墙作用的模型计算结果,规范建议的周期折减系数较为保守。同时研究发现,填充墙对高层框-剪结构的影响程度要比剪力墙结构大。  相似文献   

湖南省似大地水准面2017模型及精度分析     

董明旭  李建成  华亮春  姜卫平  尹昊华  敖敏思  曾翔强 《大地测量与地球动力学》2019,39(1):66-71

利用近7万个湖南及邻近省份重力观测数据、502个GNSS/水准控制点及数字高程模型，以EIGEN-6C4全球重力场模型作参考重力场，采用顾及地球曲率影响的各类地形质量位及引力的第二类Helmert凝集法严密算法，利用高分辨率地形数据恢复甚短波扰动重力场，确定空间分辨率2′×2′的高精度湖南省似大地水准面模型（HNGG2017）。经外部检核，模型整体精度均优于±0.022 m。与历史模型相比，新模型在湖南北部常德汉寿、西南部永州江永等地区精度得到显著改善。  相似文献   

BDS-3多频点伪距单点定位性能研究     

张乾坤  刘小生  何琦敏 《测绘通报》2020,(1):71-75

针对目前有关北斗三号系统伪距单点定位研究较少，未对三号系统多个频点的定位性能进行对比分析的现状，本文利用实测数据对三号系统多个频点的定位性能进行了研究，并联合BDS-2、Galileo进行了同频伪距单点定位试验，统计分析了组合定位多个频点的同频定位结果。试验结果表明：目前三号系统单独定位能力有限，不适合单独定位；BDS-3/Galileo同频组合定位可以弥补BDS-3新频点单频定位时卫星个数不足、数据不完整导致的定位精度过差的情况，同时能够提高Galileo的定位精度；BDS-2/3的B3I频点与BDS/Galileo组合的B2b频点的定位精度均与GPS的L1频点的定位精度相当。  相似文献   

二次曲面与最小二乘配置的组合模型在GPS高程异常拟合中的应用     

吕建伟  张志华  张新秀  刘祖昱 《测绘通报》2020,(5):127

在工程实践应用中，为了有效利用GPS高程数据，减少对传统水准测量的依赖，提高GPS高程异常的拟合精度便显得十分重要。为此，本文在介绍二次曲面拟合和最小二乘配置拟合基本原理分析、算法过程推导的基础上，提出了一种新的高程异常拟合方法。首先在二次曲面拟合的基础上，计算得到原始观测数据与拟合数据之间的残差序列，然后采用最小二乘配置模型对包括二次曲面拟合模型误差的综合误差进行优化减弱，最后得到新的高程异常。通过实例，将二次曲面拟合法，最小二乘配置法与文中提出的新方法进行比较分析。结果表明：新的组合方法的拟合预测精度要明显优于最小二乘配置及二次曲面拟合。  相似文献   

A New Retracking Technique for Brown Peaky Altimetric Waveforms     

Fukai Peng 《Marine Geodesy》2018,41(2):99-125

A new Brown-Peaky (BP) retracker has been developed for peaky waveforms that usually appear within ～10 km to the coastline. The main feature of the BP is that it fits peaky waveforms using the Brown model without introducing a peak function. The retracking strategy first detects the peak location and width of a waveform using an adaptive peak detection method, and then estimates retracking parameters using a weighted least squares (WLS) estimator. The WLS assigns a downsized weight to corrupted waveform gates, but an equal weight to other normal waveform gates. The BP retracker has been applied to 4-year Jason-1 waveform (2002–2006) in two Australian coastal zones. The results retracked by BP, MLE4 and ALES retrackers have been validated against tide-gauge observations located at Burnie, Lorne and Broome. The comparison results show that three retrackers have similar performance over open oceans with the correlation coefficient (～0.7) and RMSE (～13 cm) between altimetric and tide-gauge sea levels for distance >7 km offshore. The main improvement of BP retracker occurs for distance ≤7 km to the coastline, where validation results indicate that data retracked by BP are more accurate (15–21 cm) than those by ALES (16–24 cm) and MLE4 (19–37 cm).  相似文献   

高精度温度计在水温观测中的仪器稳定性分析     

邱永平 《中国地震》2018,34(4):828-836

利用宁波地震台水温10年来的单测项、6年来的同层比测资料,对高精度温度计的仪器短期和长期稳定性进行分析对比。研究发现仪器长期存在漂移现象,漂移量的大小与每套仪器的系统特性有关,但随着观测时间的延续,漂移量逐渐减少,认为该现象对地震前兆观测影响不大;短期稳定性存在不明原因的阶跃和脉冲现象,但次数不多,幅度不大,如果不是并行观测,较难判别。因此,在资料分析时要考虑仪器的这些问题。有时仪器短期非常稳定,数天至20天整点值为同一测值。  相似文献   

PTP协议在广电时间同步网中的应用研究          下载免费PDF全文

权雨  彭良福  何永青 《全球定位系统》2020,45(1):99-104

随着广电行业的飞速发展,以串行数字接口(SDI)基带信号为基础技术架构的传统电视信号已经很难满足未来技术发展和业务扩展的需求．得益于现代通信技术的迅速发展以及即将到来的万物互联的5G时代,广电行业也将采用IP化技术来构建新的网络系统．处在向IP化发展的过渡期,广电IP化目前还存在一些亟待解决的问题．为了解决广电系统网络中需要更高精度的同步信号来完成时间同步的问题,本文利用精确时间协议（PTP）时间同步技术在专用以太网中完成时间同步组网,搭建了测试环境并对测试数据进行了分析．测试结果表明,相较于传统的网络时间协议（NTP）时间同步技术,输出PTP信号的准确度能够达到亚微秒量级,完全满足广电行业IP化数字电视系统时间同步信号的高精度需求．   相似文献   

SMAP卫星海表盐度产品的检验与校正     

秦思思  王辉  朱江  万莉颖  张宇  王昊运 《海洋学报(英文版)》2020,39(3):148-158

In this study, sea surface salinity(SSS) Level 3(L3) daily product derived from soil moisture active passive(SMAP)during the year 2016, was validated and compared with SSS daily products derived from soil Moisture and ocean salinity(SMOS) and in-situ measurements. Generally, the root mean square error(RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the sea surface temperature(SST). Then, a regression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.  相似文献