湘黔桂新元古代拉伸纪晚期地层年代格架对比及关键地质事件初探     

张嘉玮  陈建书  吴滔  叶太平  陈明华  代雅然  邓小杰  牟军 《地学前缘》2020,27(4):1-16

湘黔桂地区发育一套完整的新元古代拉伸纪晚期地层(下江群及其相当地层),是研究扬子克拉通与华夏板块碰撞拼接后华南大陆裂谷盆地演化的重要载体。本文报道了贵州省铜仁市万山区清水江组上部、平略组底部及中部变质凝灰岩和沉凝灰岩的年龄,分别为(763.8±5.5) Ma(N=24,MSWD=0.29)、(760.2±4.1) Ma(N=25,MSWD=0.39)、(759.1±3.9) Ma(N=26,MSWD=0.38)。通过对湘黔桂地区下江群及其相当地层中已有火山岩、火山碎屑沉积岩、含凝灰质岩石年龄的系统梳理与分析研究,进一步确定下江群其及相当地层的沉积时限在822~715 Ma,桂北丹洲群三门街组玄武岩是在武陵造山后伸展背景下湘黔桂地区裂谷最大裂陷时期的产物,清水江组与平略组内大量的火山物质可能来源于江南造山带东段800~760 Ma的中酸性喷出岩。结合地层、岩性、年代特征,本文恢复了湘黔桂盆地新元古代拉伸纪晚期的演化历史,并认为该套地层符合建立下江系条件。  相似文献   

山东莱芜盆地碳酸盐岩热液溶蚀特征及水文地质意义   总被引：1，自引：0，他引：1  

刘元晴  周乐  李伟  王新峰  马雪梅  吕琳  邓启军  陈晨 《现代地质》2020,34(1):199-206

鲁中山区莱芜盆地在燕山期发生大规模岩浆侵入活动,岩浆岩体外围碳酸盐岩区分布有水源地、富水块段等岩溶发育富水区,且靠近岩体含水层多发生大理岩化。富含CO₂、H₂S等酸性成分的岩浆热液流体,能对碳酸盐岩产生明显的溶蚀作用。基于岩石样品化学组分分析、水文地质调查及数据统计分析、热液溶蚀地质点详细观测,构建热液溶蚀模式,对莱芜盆地及外围热液溶蚀特征及机理进行研究。结果表明:高温高压岩浆侵入使得接触带碳酸盐岩发生热液变质大理岩化;沿渗透性断裂、裂缝以及不整合面等运移的热液流体,对碳酸盐岩地层产生酸性热液溶蚀和混合溶蚀作用,形成不同规模溶蚀孔洞,构成地下水富集空间,为寻找城镇地下水后备水源地提供新方向。  相似文献   

塔里木盆地南缘8.5 ka以来的黄土岩石磁学特征及其磁化率变化机制          下载免费PDF全文

吕爽  韩文霞  张涛  韩凤清  卢胜城  马学海  张志高 《地球物理学报》2019,62(8):3053-3066

黄土岩石磁学参数是古气候研究中的重要指标，其中磁化率应用最为广泛，并在黄土高原地区取得重大进展，其受控于成壤作用的变化机制也被普遍接受.然而在黄土高原外缘的新疆地区，磁化率的变化机制仍不明确，导致磁化率的古气候意义在该区存在较大争议.本文选取塔里木盆地南缘具有精确年代控制的典型黄土剖面（羊场剖面）开展岩石磁学和高分辨率磁化率研究，利用交叉小波分析方法并结合剖面粒度、矿物及元素特征对该地区磁化率变化机制进行初步探讨.结果显示，羊场剖面的岩石磁学性质主要由粗颗粒软磁性矿物所控制，同时也表现出一定的顺磁性特征.根据载磁矿物和磁化率变化特征可将剖面进一步划分为两个阶段：阶段Ⅰ（8.5~2.5 ka），载磁矿物以亚铁磁性的磁铁矿为主，磁化率值整体较高；阶段Ⅱ（2.5~0.2 ka），亚铁磁性矿物依然占据主导地位，但硬磁性矿物和以黄铁矿为代表的顺磁性矿物相对增多，磁化率值显著降低.相关性研究和交叉小波分析表明：阶段Ⅰ磁化率与粗颗粒组分的变化具有一致性，符合"风速论"模式；阶段Ⅱ磁化率不仅与粗颗粒组分具有明显的正相关关系，而且与指示成壤作用强度的频率磁化率百分含量呈现出显著的负相关关系，暗示了阶段Ⅱ的磁化率变化可能受到"风速论"和"还原性成壤"模式的共同影响.本文拓宽了对新疆地区黄土岩石磁学特征及其磁化率变化机制的深入理解，也为利用磁化率恢复新疆及中亚地区全新世以来的古气候变化历史提供了新的线索.  相似文献   

Sedimentary and geochemical characterization of Middle–Late Miocene formations in the Neogene Tsugaru Basin,Japan by means of DTH27‐1 well sediment analysis     

Paolo Martizzi  Shun Chiyonobu  Hiroyuki Arato 《Island Arc》2020,29(1)

Middle–Late Miocene age siliceous formations outcropping along the northwestern side of Honshu Island are considered prospective source rocks for hydrocarbons. An analysis of geophysical, sedimentological, and geochemical properties is essential to evaluate the formations' source potential, and to understand the factors that determined the accumulation and preservation of organic matter. This study investigates the Middle–Late Miocene geological record of the Tsugaru back‐arc basin, located in the western part of Aomori prefecture, through an analysis of a 200 m long portion of a core from the DTH27‐1 well; this core is composed of the diatomaceous siltstones of the Akaishi Formation and the siliceous mudstones of the Odoji Formation. Sedimentological and geophysical characterization showed that the Akaishi Formation's diatomaceous siltstones are mostly massive and bioturbated, have low magnetic susceptibility, and demonstrate moderate natural radioactivity. Although the Odoji Formation's siliceous mudstones are massive, they have exceedingly low magnetic susceptibility and high natural radioactivity. Geochemical data from a Rock‐Eval Pyrolysis such as total organic carbon and generative potential (S1 + S2) revealed that, in the Tsugaru area, only the Odoji Formation is a likely prospective source rock for hydrocarbons. On the other hand, T_max values indicate that both the formations are thermally immature for generating hydrocarbons. The difference between the Akaishi and Odoji Formation in the sedimentological facies, in terms of the degree of bioturbation and the organic carbon content, indicates variations in lithological properties, such as porosity and grain size; moreover, this difference indicates a variation in the paleo‐oxygenation of bottom waters, with the transition from oxygen‐deficient conditions in the Middle Miocene to the more oxygenated conditions in the Late Miocene. Both the lithological and paleo‐environmental factors possibly influenced the organic richness in the two formations.  相似文献   

华北南缘中元古界高山河群碎屑锆石U-Pb年代学及其地质意义^*          下载免费PDF全文

王淼  周洪瑞  张恒 《古地理学报》2020,22(1):39-55

为了探讨华北板块南缘中元古代沉积地层的时代归属和物质来源、区域古地理格局和大地构造特征,对豫西灵宝福地地区的高山河群进行碎屑锆石U-Pb年代学和锆石微量元素特征研究。获得的高山河群年龄最小(年轻)的单颗碎屑锆石 ²⁰⁷Pb/²⁰⁶Pb 年龄值为1685±39 Ma,从而限制了高山河群最早沉积年龄不早于1700 Ma。结合上覆的龙家园组年代学标定(1594±12 Ma),将高山河群的形成年代限定为1700—1600 Ma,即中元古代长城纪的中晚期,属国际地质年表的“固结纪”。高山河群中碎屑锆石 ²⁰⁷Pb/²⁰⁶Pb 年龄范围为1685—2751 Ma,呈现1850 Ma、2150 Ma、2300 Ma和2500 Ma共4个年龄峰值,对应于华北克拉通古元古代重要的地质事件,并且高山河群以1850 Ma和2500 Ma峰值年龄段的地质体为主要的物源区。根据高山河群与云梦山组碎屑锆石年龄频率对比,推测在豫西地区西侧存在以往报道较少的年龄为2500 Ma的地质体。根据熊耳群火山岩及其对应锆石的地球化学特征和熊耳期盆地动力学性质,并结合高山河群沉积相特征和沉积盆地构造属性,认为熊耳群形成于与“岛弧”共生的拉张性质的弧后盆地地区,而其上覆的高山河群为弧后盆地靠近大陆一侧的具有被动大陆边缘性质的滨浅海沉积。  相似文献   

A triple porosity scheme for fluid/solid substitution: theory and experiment     

Yongyang Sun  Boris Gurevich  Maxim Lebedev  Stanislav Glubokovskikh  Vassili Mikhaltsevitch  Junxin Guo 《Geophysical Prospecting》2019,67(4):888-899

Quantifying the effects of pore-filling materials on elastic properties of porous rocks is of considerable interest in geophysical practice. For rocks saturated with fluids, the Gassmann equation is proved effective in estimating the exact change in seismic velocity or rock moduli upon the changes in properties of pore infill. For solid substance or viscoelastic materials, however, the Gassmann theory is not applicable as the rigidity of the pore fill (either elastic or viscoelastic) prevents pressure communication in the pore space, which is a key assumption of the Gassmann equation. In this paper, we explored the elastic properties of a sandstone sample saturated with fluid and solid substance under different confining pressures. This sandstone sample is saturated with octadecane, which is a hydrocarbon with a melting point of 28°C, making it convenient to use in the lab in both solid and fluid forms. Ultrasonically measured velocities of the dry rock exhibit strong pressure dependency, which is largely reduced for the filling of solid octadecane. Predictions by the Gassmann theory for the elastic moduli of the sandstone saturated with liquid octadecane are consistent with ultrasonic measurements, but underestimate the elastic moduli of the sandstone saturated with solid octadecane. Our analysis shows that the difference between the elastic moduli of the dry and solid-octadecane-saturated sandstone is controlled by the squirt flow between stiff, compliant, and the so-called intermediate pores (with an aspect ratio larger than that of compliant pore but much less than that of stiff pores). Therefore, we developed a triple porosity model to quantify the combined squirt flow effects of compliant and intermediate pores saturated with solid or viscoelastic infill. Full saturation of remaining stiff pores with solid or viscoelastic materials is then considered by the lower embedded bound theory. The proposed model gave a reasonable fit to the ultrasonic measurements of the elastic moduli of the sandstone saturated with liquid or solid octadecane. Comparison of the predictions by the new model to other solid substitution schemes implied that accounting for the combined effects of compliant and intermediate pores is necessary to explain the solid squirt effects.  相似文献   

基于贝叶斯框架的各向异性页岩储层岩石物理反演技术   总被引：1，自引：0，他引：1       下载免费PDF全文

刘财  符伟  郭智奇  刘喜武  刘宇巍 《地球物理学报》2018,61(6):2589-2600

页岩岩石物理建模旨在建立页岩矿物组分、微观结构、流体填充与岩石弹性参数的关系.对四川盆地龙马溪组页岩进行岩石物理建模研究，针对页岩黏土含量高、层间微裂缝发育等特点，利用Backus平均理论描述页岩黏土矿物弹性参数，利用Chapman理论计算与水平微裂缝有关的VTI各向异性，并利用Bond变换考虑地层倾角的影响.提出以黏土矿物纵、横波速度和孔隙纵横比为拟合参数进行岩石物理反演的方法，并引入贝叶斯框架减小反演的多解性.由已知的黏土矿物纵、横波速度和孔隙纵横比作为先验信息，并以测井纵、横波速度作为约束条件建立反演的目标函数，同时利用粒子群算法进行最优化搜索.计算结果表明，基于先验约束和粒子群算法的反演方法能够较准确地反演黏土矿物的弹性参数、孔隙形态参数以及裂缝密度等参数.计算得到的黏土纵、横波速度较高，并且在一定范围内变化，这可能与龙马溪组页岩的黏土矿物组分中具有较高弹性模量的伊利石含量较高有关，同时也与黏土定向排列等微观物性特征有关.反演得到的裂缝密度与纵波各向异性参数ε呈明显的正相关，而与横波各向异性参数γ相关性较小.另外，页岩各向异性参数与黏土垂向的纵横波速度有较强的相关性.  相似文献   

基于微纳米孔隙理论的页岩气储层岩石物理建模方法          下载免费PDF全文

印林杰  印兴耀  宗兆云  陈本池  陈祖庆 《地球物理学报》2020,63(4):1642-1653

页岩储层由于其复杂的构造和孔隙特征,目前一般的岩石物理模型无法对其进行精确描述.微纳米孔隙作为页岩气主要的储集空间,对页岩整体弹性参数有较大影响.干酪根作为页岩中重要的有机质矿物,在页岩中的赋存状态随成熟度不同而变化,同时干酪根也是纳米级孔隙的主要发育场所.目前常规的岩石物理建模方法没有体现微纳米孔隙的作用,同时较少考虑不同成熟度下干酪根对页岩储层弹性性质的影响.本文采用一种微纳米孔隙理论描述页岩微纳米孔隙特性,考虑微纳米孔隙和不同成熟度下干酪根的赋存状态,应用上述微纳米孔隙模型、各向异性SCA-DEM模型、各向异性Eshelby-Cheng模型和Brown-Korringa固体替换方程等建立一种新的页岩储层岩石物理模型.利用中国西南某工区页岩气井对该模型进行验证,模型预测的横波速度与测井速度拟合较好.结果表明不同干酪根成熟度的页岩岩石物理建模结果具有一定的差异,据此可大致区分该工区井的干酪根成熟度;最后对微纳米孔参数进行正演分析,结果反映了页岩的纵横波速度随微纳米孔隙参数的变化趋势.  相似文献   

郯庐断裂带中南段及邻区基于背景噪声的瑞利波群速度层析成像   总被引：1，自引：0，他引：1       下载免费PDF全文

顾勤平  丁志峰  康清清  李大虎 《地球物理学报》2020,63(4):1505-1522

本文收集了郯庐断裂带中南段及邻区省属和市县地震台网共261个宽频带地震台站2015年1月至2016年12月间的垂直向连续波形资料,利用长时间序列背景噪声互相关法提取台站对之间的经验格林函数,采用时频分析法提取瑞利面波混合路径频散曲线.通过质量控制和严格筛选后得到了15627条路径上的群速度频散曲线,重新构建了郯庐断裂带中南段及邻区瑞利波5～50s、分辨率为0.75°×0.75°的群速度分布图像.分析研究了6个周期的群速度分布图像和3条不同方向的纵向周期剖面,这些图像揭示了郯庐断裂带中南段及邻区地壳上地幔速度结构具有横向分块和纵向成层的非均匀性特征.结果表明,短周期(6s、10s)的群速度分布与地表地质和构造特征密切相关.拥有较厚沉积层的苏北盆地、合肥盆地及河淮盆地等显示为低速,而基岩广泛出露的鲁西隆起、大别—苏鲁造山带、扬子克拉通及华南褶皱系则呈现出大面积的高速异常.随着周期的递增(15s、20s),群速度分布受地表地质构造的影响逐渐弱化.受地壳厚度和莫霍面附近的速度差异影响,大别和苏鲁地区在较长周期(25s、30s)群速度图上表现出相对较低的速度,这可能与这些地方Moho面埋藏较深有关.纵向剖面显示,苏鲁—大别造山带及其高压、超高压变质带不仅在浅地表具有基本相同的地形地貌和构造特征,地壳内也有着极为相似的Rayleigh波群速度分布特征.壳内群速度分布总体上表现为上凸下凹状,形状似一"哑铃".上地壳具有上凸下凹的形态、相比邻区具有较高的群速度值;中地壳低速;下地壳上凸下凹且埋藏较深,反映出具有陆陆碰撞造山的残留山根特征.苏鲁及大别两地自浅地表至上地幔具有相似的Rayleigh波群速度分布不仅为二者被左旋走滑的郯庐带平移错开提供了佐证资料,同时也为郯庐带的形成与演化提供了地震学依据.  相似文献   

A semi-empirical approach to model pressure dependence of elastic moduli in granular media accounting for variations of coordination-number and Poisson-ratio     

Angelo Sajeva  Davide Scarpellini  Pamela Tempone  Simone Capaccioli 《Geophysical Prospecting》2019,67(4):872-887

The effective medium theory based on the Hertz–Mindlin contact law is the most popular theory to relate dynamic elastic moduli (or elastic velocities) and confining pressure in dry granular media. However, many experimental results proved that the effective medium theory predicts pressure trends lower than experimental ones and over-predicts the shear modulus. To mitigate these mispredictions, several evolutions of the effective medium theory have been presented in the literature. Among these, the model named modified grain contact theory is an empirical approach in which three parametric curves are included in the effective medium theory model. Fitting the parameters of these curves permits to adjust the pressure trends of the Poisson ratio and the bulk modulus. In this paper, we present two variations of the modified grain contact theory model. First, we propose a minor modification in the fitting function for the porosity dependence of the calibration parameters that accounts for non-linearity in the vicinity of the critical porosity. Second, we propose a major modification that reduces the three-step modified grain contact theory model to a two-step model, by skipping the calibration parameter–porosity fit in the model and directly modelling the calibration parameter–pressure relation. In addition to an increased simplicity (the fitting parameters are reduced from 10 to 6), avoiding the porosity fit permits us to apply the model to laboratory data that are not provided with accurate porosity measurements. For this second model, we also estimate the uncertainty of the fitting parameters and the elastic velocities. We tested this model on dry core measurements from literature and we verified that it returns elastic velocity trends as good as the original modified grain contact theory model with a reduced number of fitting parameters. Possible developments of the new model to add predictive power are also discussed.  相似文献