A semi-empirical approach to model pressure dependence of elastic moduli in granular media accounting for variations of coordination-number and Poisson-ratio     

Angelo Sajeva  Davide Scarpellini  Pamela Tempone  Simone Capaccioli 《Geophysical Prospecting》2019,67(4):872-887

The effective medium theory based on the Hertz–Mindlin contact law is the most popular theory to relate dynamic elastic moduli (or elastic velocities) and confining pressure in dry granular media. However, many experimental results proved that the effective medium theory predicts pressure trends lower than experimental ones and over-predicts the shear modulus. To mitigate these mispredictions, several evolutions of the effective medium theory have been presented in the literature. Among these, the model named modified grain contact theory is an empirical approach in which three parametric curves are included in the effective medium theory model. Fitting the parameters of these curves permits to adjust the pressure trends of the Poisson ratio and the bulk modulus. In this paper, we present two variations of the modified grain contact theory model. First, we propose a minor modification in the fitting function for the porosity dependence of the calibration parameters that accounts for non-linearity in the vicinity of the critical porosity. Second, we propose a major modification that reduces the three-step modified grain contact theory model to a two-step model, by skipping the calibration parameter–porosity fit in the model and directly modelling the calibration parameter–pressure relation. In addition to an increased simplicity (the fitting parameters are reduced from 10 to 6), avoiding the porosity fit permits us to apply the model to laboratory data that are not provided with accurate porosity measurements. For this second model, we also estimate the uncertainty of the fitting parameters and the elastic velocities. We tested this model on dry core measurements from literature and we verified that it returns elastic velocity trends as good as the original modified grain contact theory model with a reduced number of fitting parameters. Possible developments of the new model to add predictive power are also discussed.  相似文献   

Deep tunnel fronts in cohesive soils under undrained conditions: a displacement-based approach for the design of fibreglass reinforcements     

di Prisco  Claudio  Flessati  Luca  Porta  Davide 《Acta Geotechnica》2020,15(4):1013-1030

The fronts of tunnels excavated under particularly difficult ground conditions by employing conventional tunnelling methods are commonly supported: the stabilization is usually achieved either by improving the mechanical properties of the soil (injections, jet grouting, soil freezing, etc.) or by introducing linear inclusions. This last technique, consisting in the introduction of pipes (usually made of fibreglass reinforced polymers) in the front, is particularly popular since it is very simple to adapt the reinforcement geometry, length and number to the different conditions encountered during the excavation. The design of this reinforcement technique is nowadays based on very simplified approaches: on either empirical formula or the limit equilibrium method. In a previous paper, the authors numerically studied the mechanical response of unreinforced fronts in cohesive soils and defined a non-dimensional front characteristic curve. In this paper, the authors intend to take into consideration the role of reinforcements by following the same approach. A procedure allowing the definition of the reinforced non-dimensional front characteristic curve, once the reinforcement pattern is assigned, is introduced. The practical use of this curve is described.

  相似文献   

Coexisting tectonic settings: the example of the southern Tyrrhenian Sea     

Marco Cuffaro  Federica Riguzzi  Davide Scrocca  Carlo Doglioni 《International Journal of Earth Sciences》2011,100(8):1915-1924

We performed geodetic strain rate analyses in southern Italy, using new GPS velocities. Two-dimensional strain and rotation rate fields were estimated and results show that most of the shortening is distributed in the northern Sicily offshore. Extension becomes more evident and comparable with shortening on the eastern side of the same margin, and greater in the eastern Sicily offshore. Principal shortening and extension rate axes are consistent with long-term geological features: seismic reflection profiles show both active compressive and extensional faults affecting Pleistocene strata. We show evidence for contemporaneous extension and transtension in the Cefalù Basin. Combining geodetic data and geological features point to the coexistence of independent geodynamic processes, i.e., the active E–W backarc spreading in the hangingwall of the Apennines subduction zone and shortening along the southern margin of the Tyrrhenian backarc basin operated by the NNW-motion of Africa relative to Eurasia.  相似文献   

Human-induced coastal landslide reactivation. Monitoring by PSInSAR techniques and urban damage survey (SE Spain)   总被引：1，自引：1，他引：0  

Davide Notti  Jorge Pedro Galve  Rosa María Mateos  Oriol Monserrat  Francisco Lamas-Fernández  Francisca Fernández-Chacón  Francisco Javier Roldán-García  José Vicente Pérez-Peña  Michele Crosetto  José Miguel Azañón 《Landslides》2015,12(5):1007-1014

  相似文献   

Georeferencing Animal Specimen Datasets          下载免费PDF全文

Marieke van Erp  Robert Hensel  Davide Ceolin  Marian van der Meij 《Transactions in GIS》2015,19(4):563-581

For biodiversity research, the field of study that is concerned with the richness of species of our planet, it is of the utmost importance that the location of an animal specimen find is known with high precision. Due to specimens often having been collected over the course of many years, their accompanying geographical data is often ambiguous or may be very imprecise. In this article, we detail an approach that utilizes reasoning and external sources to improve the geographical information of animal finds. Our main contribution is to show that adding external domain knowledge improves the ability to georeference locations over traditional methods that focus solely on analyzing geographical information. Additionally, our system is able to output the confidence it has in its decisions through a confidence measure based on the difficulty of the instance and the steps undertaken to disambiguate it. Our results show that adding domain knowledge to the georeferencing process increases the accuracy @5km from 38.9% to 61.7% and from 47.0% to 74.5% @25km. Furthermore, we reduce the mean distance by more than half, from 251.1km to 114.5km, and decrease the number of records for which no reference can be found from 26.2% to 7.4%.  相似文献   

Seismic design of floor–wall joints of multi-storey CLT buildings to comply with regularity in elevation     

Davide Trutalli  Luca Pozza 《Bulletin of Earthquake Engineering》2018,16(1):183-201

The effects of irregularity in elevation of cross-laminated timber buildings have not been fully analysed in literature to provide useful information for the design. In this work, a number of building configurations, regular or irregular in elevation, characterized by a different arrangement per storey of the floor–wall joints have been analysed by means of non-linear dynamic analyses. Comparative results in terms of ratio between the behaviour q-factor of the investigated irregular configurations and that of reference regular ones, show that less dissipative capacity can be expected if the building is irregular due to a disequilibrium among storeys between the actual and the required strength provided by the floor–wall joints. A correlation method to estimate the behaviour q-factor for perfectly regular cross-laminated timber buildings is here presented and extended to in-elevation irregular ones. A new empirical formulation to assess the reliable corrective factor accounting for the irregularity in elevation of cross-laminated timber buildings, according to Eurocode 8 provisions, is also proposed. A final discussion about the implications of in-elevation irregularity on the building design is reported.  相似文献   

Process-based design flood estimation in ungauged basins by conditioning model parameters on regional hydrological signatures     

Daniela Biondi  Davide Luciano De Luca 《Natural Hazards》2015,79(2):1015-1038

  相似文献   

Crystal structure refinement of chromites from two achondrites,their T‐f(O2) conditions,and implications          下载免费PDF全文

Davide Lenaz  Birger Schmitz 《Meteoritics & planetary science》2017,52(9):1763-1775

Six Cr‐spinel grains from NWA 6077 brachinite‐like and NWA 725 winonaite achondrites have been studied by single‐crystal X‐ray diffraction and structural refinement. From a chemical point of view, spinels from NWA 6077 show Cr/(Cr + Al) (i.e., Cr#) and Mg/(Mg + Fe²⁺) (i.e., Mg#) values similar to other brachinites, while the Cr# of NWA 725 is lower than that of literature winonaites. Spinels from NWA 6077 and NWA 725 meteorites show similar cell edges, while the oxygen positional parameter is rather different being about 0.2629 for NWA 6077 and 0.2622 for NWA 725. Considering both parameters, NWA 725 shows structural features that are close to some terrestrial spinel occurrences as in komatiites, kimberlites, or included in diamonds; those from NWA 6077 show values that have no terrestrial analogs. Olivine‐chromite closure temperature ranges from ~737 to ~765° C for NWA 725, being similar to that of literature winonaites and ~846 to ~884° C for NWA 6077. The logfO₂ ranges from ?19.8 to ?20.5 and ?17.0 to ?17.9 for the two meteorites, respectively. The u values for terrestrial samples can give information about the cooling history of the samples. For the extraterrestrial samples, it seems that it can give information about the cooling only for spinels where it is lower than 0.2625. For higher values, it appears related only to the chemistry of the spinels.  相似文献   

Some chemical characteristics of the brines in Bannock and Tyro Basins: salinity, sulphur compounds, Ca, F, pH, A_t, PO₄, SiO₂, NH₃     

Davide Bregant  Giulio Catalano  Giuseppe Civitarese  Anna Luchetta 《Marine Chemistry》1990,31(1-3)

Results of the chemical investigation on the Bannock and Tyro Basins are reported.Both basins were found to be hypersaline ( 10 times higher than salinity of normal seawater) and anoxic. In all investigated basins a region of transition, a few meters thick, was identified at depths > 3327 dbar. It is characterized by a sharp gradient of salinity, and all concentrations of analysed species increase strongly except for dissolved oxygen and nitrate, which immediately drop to zero. This region appears as a sharp boundary that prevents mixing. As a result, in the presence of organic matter, an anoxic condition developed with the complete depletion of dissolved oxygen. At the same time, hydrogen sulphide and ammonium accumulated within the brine. Between the Bannock and the Tyro brines differences occur in the measured concentrations of H₂S, SO²⁻₄, Ca²⁺ and NH₃. There are some differences also within the Bannock area sub-basins.The Libeccio sub-basin, in the Bannock area, contains a double-layered brine: the upper layer is 140 dbar thick and the lower layer is 300 dbar thick. A second interface between upper and lower brines develops at a depth of 3500 dbar. Nearly all of the measured concentrations vs. depth show the double layer, with the exception of ammonium, the concentration of which remains nearly constant throughout the anoxic column. Profiles of the other species analyzed show remarkable differences on passing from the upper to the lower brine. Hydrogen sulphide, sulphate and fluoride concentrations appear constant and then increase at the second interface. The calcium concentration is also constant in the upper brine, but decreases at the second interface. Total alkalinity and phosphate concentrations show a maximum peak just below the first interface. However, after passing through the second interface all the chemical parameters exhibit an almost constant behaviour down to the bottom.Hypersaline conditions are attributed to the dissolution of Messinian evaporite, and anoxia is suggested to originate from the oxidation of organic matter present in sediments and from the absence of bottom water circulation in such a deep and enclosed environment.The chemical conditions can be summarized as follows: in the Libeccio Basin the values for the species analysed have the ranges: 39–321 psu for ‘salinity’, 8.2−6.5 for pH, 2.7–4.0 mM for total alkalinity, 0.2-0 mM for dissolved oxygen, 0–1669 μM for hydrogen sulphide, 0–198 μM for thiol, 31–99 mM for sulphate, 11–21 mM for calcium, 7–100 μM for fluoride, 0.2–3080 μM for ammonium, 5.8-0 μM for nitrite, 0.2–12 μM for phosphate and 8–130 μM for silicate.  相似文献   

Diatom quantification and their distribution with salinity brines in coastal sediments of Terra Nova Bay (Antarctica)     

Baldi F  Facca C  Marchetto D  Nguyen TN  Spurio R 《Marine environmental research》2011,71(4):304-311

Benthic diatoms represent an important element of global nutritional productivity; to raise attention on their role, which is often neglected due to analytical difficulties, surface (1 cm top layer) coastal sediments from Gerlache inlet to Penguin Bay at Terra Nova Bay were collected and stored at -20 °C. DNA amplification by real-time PCR, based on diatom-specific oligonucleotide primers designed on small-subunit rRNA (SSU rRNA), was performed in addition to diatom conventional cell counting and spectrophotometric determination of photo-pigments. Moreover, cations and anions were determined in sediments with the aim to identify factors involved in the control of diatom abundance. Diatom distribution was found quite heterogeneous displaying significant differences from site to site. The salinity in sediments ranged from 45.1 at Gerlache inlet to 76.2 at Penguin Bay and it was correlated with cell abundance, biodiversity, amount of pigments and amplified DNA. The dominant species, Fragilariopsis curta, was associated to sediment salinity brines.  相似文献