共查询到20条相似文献，搜索用时 15 毫秒
1.
We describe an active right-lateral strike-slip fault zone along the southern margin of the Japan Sea, named the Southern Japan Sea Fault Zone (SJSFZ). Onshore segments of the fault zone are delineated on the basis of aerial photograph interpretations and field observations of tectonic geomorphic features, whereas the offshore parts are interpreted from single-/multichannel seismic data combined with borehole information. In an effort to evaluate late Quaternary activity along the fault zone, four active segments separated by uplifting structures are identified in this study. The east–northeast-trending SJSFZ constitutes paired arc-parallel strike-slip faults together with the Median Tectonic Line (MTL), both of which have been activated by oblique subduction of the Philippine Sea plate during the Quaternary. They act as the boundaries of three neotectonic stress domains around the eastern margin of the Eurasian plate: the near-trench Outer zone and NW–SE compressive Inner zone of southwest Japan arc, and the southern Japan Sea deformed under E–W compression from south to north. 相似文献
2.
C. L. Fergusson 《Australian Journal of Earth Sciences》2013,60(5):627-649
The Lachlan Fold Belt of southeastern Australia developed along the Panthalassan margin of East Gondwana. Major silicic igneous activity and active tectonics with extensional, strike-slip and contractional deformation have been related to a continental backarc setting with a convergent margin to the east. In the Early Silurian (Benambran Orogeny), tectonic development was controlled by one or more subduction zones involved in collision and accretion of the Ordovician Macquarie Arc. Thermal instability in the Late Silurian to Middle Devonian interval was promoted by the presence of one or more shallow subducted slabs in the upper mantle and resulted in widespread silicic igneous activity. Extension dominated the Late Silurian in New South Wales and parts of eastern Victoria and led to formation of several sedimentary basins. Alternating episodes of contraction and extension, along with dispersed strike-slip faulting particularly in eastern Victoria, occurred in the Early Devonian culminating in the Middle Devonian contractional Tabberabberan Orogeny. Contractional deformation in modern systems, such as the central Andes, is driven by advance of the overriding plate, with highest strain developed at locations distant from plate edges. In the Ordovician to Early Devonian, it is inferred that East Gondwana was advancing towards Panthalassa. Extensional activity in the Lachlan backarc, although minor in comparison with backarc basins in the western Pacific Ocean, was driven by limited but continuous rollback of the subduction hinge. Alternation of contraction and extension reflects the delicate balance between plate motions with rollback being overtaken by advance of the upper plate intermittently in the Early to Middle Devonian resulting in contractional deformation in an otherwise dominantly extensional regime. A modern system that shows comparable behaviour is East Asia where rollback is considered responsible for widespread sedimentary basin development and basin inversion reflects advance of blocks driven by compression related to the Indian collision. 相似文献
3.
太平洋板块俯冲与中国东部中生代地质事件 总被引：44，自引：0，他引：44
中国东部至少自侏罗纪开始就一直处于俯冲大洋板块之上,但是有关俯冲板块对其影响程度一直有不同的认识。最近的研究表明,太平洋海山岛链的时空分布显示太平洋板块的漂移方向曾发生多次转折,这些转折与白垩纪中国东部的构造演化和岩浆事件有着密切的时空耦合关系。从时代和力学性质上看,太平洋板块俯冲方向的改变在很大程度上控制着中国东部中生代的盆地演化和郯庐断裂活动等重要地质事件。这些认识为理解中国东部构造演化提供了新的视角,包括岩石圈减薄的机制、郯庐断裂的演化,以及燕山期大规模岩浆活动等。本文重点分析了太平洋板块俯冲与中国东部中生代岩浆活动的对应关系。在125～140Ma太平洋板块向南西方向俯冲,造成中国东部岩石圈减薄,软流圈卸载上涌,发生减压部分熔融;约125Ma,太平洋板块漂移方向发生了大幅度转折,形成安第斯式的俯冲挤压,岩石圈停止减薄和减压部分熔融,出现岩浆宁静期。随着俯冲的深入,到110Ma前后俯冲板块后撤,形成弧后拉张,岩浆活动又重新开始。 相似文献
4.
Paleogeography and structure of the central Mediterranean: Sicily and its offshore area 总被引：1，自引：0，他引：1
The geology of the mainland and offshore of Sicily is illustrated by a few geologic sections and seismic profiles across the late Cenozoic orogenic belt of central and western Sicily and across the Sardinia Channel and Sicily Straits. This belt is the result of several tectonic events. Deformation involved mainly the sedimentary cover of the old African continental margin characterized by a broad basinal domain, flanked along its external (southern) margin by a shallow-water carbonate platform attached to Africa in the Triassic. Compressional deformation started in the more internal basinal rock assemblages overlying a thinned crust. The most important structural characteristic of the early phase of thrusting is the duplex pile forming the bulk of the chain in Central Western Sicily. The structure consists of a basal allochthon, made up of Permian to Middle Triassic layers, an intermediate duplex wedge, composed of competent Mesozoic carbonates, and a roof complex, including Upper Mesozoic-Lower Tertiary less competent rocks. Large-scale clockwise rotation of the thrusts accompanied transpressional movements in the hinterland during the Pliocene. Right oblique reverse faults modified the previous tectonic contacts between the allochthons in the hinterland zones. Contemporaneous south-directed imbrications affected the southern external areas, progressively incorporating foreland and piggyback basins. Development of the Gela Thrust System appears to be linked to the transpressional event; its accretion is also related to contemporaneous underthrusting at deeper levels of Mesozoic carbonate substratum. The older buried thrust sheets were pushed up to the surface breaching the deformed Tertiary cover of the Gela TS. Northwards in the belt post-Messinian normal growth faults opened half graben whose sedimentary fill underwent structural inversion. Alternation of extension and compression tectonics characterizes the Sicilian continental margin in the last million years. 相似文献
5.
Mantle peridotites from the Western Pacific 总被引：1，自引：0，他引：1
We review petrographical and petrological characteristics of mantle peridotite xenoliths from the Western Pacific to construct a petrologic model of the lithospheric mantle beneath the convergent plate boundary. The peridotite varies from highly depleted spinel harzburgite of low-pressure origin at the volcanic front of active arcs (Avacha of Kamchatka arc and Iraya of Luzon–Taiwan arc) to fertile spinel lherzolite of high-pressure origin at the Eurasian continental margin (from Sikhote-Alin through Korea to eastern China) through intermediate lherzolite–harzburgite at backarc side of Japan island arcs. Oxygen fugacity recorded by the peridotite xenoliths decreases from the frontal side of arc to the continental margin. The sub-arc type peridotite is expected to exist beneath the continental margin if accretion of island arc is one of the important processes for continental growth. Its absence suggests replacement by the continental lherzolite at the region of backarc to continental margin. Asthenospheric upwelling beneath the continental region, which has frequently occurred at the Western Pacific, has replaced depleted sub-cratonic peridotite with the fertile spinel lherzolite. Some of these mantle diapirs had opened backarc basins and strongly modified the lithospheric upper mantle by metasomatism and formation of Group II pyroxenites. 相似文献
6.
E. P. Dubinin A. V. Kokhan D. E. Teterin A. L. Grokhol’sky E. S. Kurbatova N. M. Sushchevskaya 《Geotectonics》2016,50(1):35-53
Western, central, and eastern provinces are recognized in the Scotia Sea. They are distinguished by their bottom topography, geophysical characteristics, and crustal structure, which record their different origin and evolution. The western province is characterized by the oceanic crust that formed on the West Scotia Ridge, where active spreading may have ceased as a result of a collision between propagating rift and the structural barrier of the thick continental lithosphere of the Falkland Plateau. The central province is a series of blocks mainly composed of continental crust that subsided to various depths depending on the degree of extension in the course of rifting. These blocks are separated by local areas with oceanic crust formed due to the breakup of the continental crust and diffusive spreading. These areas are characterized by deep bottom and high values of Bouguer anomalies. The southern framework of the central province consists of subsided continental blocks and microcontinents divided by small spreading-type basins formed by lithospheric extension complicated by strike-slip faulting. The eastern province is composed of oceanic crust formed on the backarc spreading East Scotia Ridge. The results of density analysis, analog, and numerical simulations allowed us to explain some features of the structure and evolution of these provinces. The insight into tectonic structure of the provinces and their evolution allowed us to recognize several types of riftogenic basins differing in geodynamics, age, and geological and geophysical characteristics. 相似文献
7.
通过岩石学、同位素年代学、变形变质特征的研究及区域对比,认为凤太泥盆纪盆地东缘（黄柏原一带）原划泥盆纪地层应为新太古代－古元古代变质结晶基底,变质达角闪岩相,其可能是佛坪穹隆构造向西北延伸,进一步证明了泥盆纪时西部凤太盆地和东部山（阳）柞（水）镇（安）盆地是两个独立盆地,中间被佛坪穹隆隔挡。该项成果对研究南秦岭地壳演化和指导凤太地区的地质找矿意义重大。 相似文献
8.
NEOTECTONICS ALONG THE EASTERN MARGIN OF THE TIBETAN PLATEAU: INFERENCES FROM BEDROCK RIVER INCISION PATTERNS1 ChenZ,BurchfielBC ,LiuY ,etal.GPSmeasurementsfromeasternTibetandtheirimplicationsforIndia/Eurasiaintracon tinentaldeformation[J] .JournalofGeophysicalResearch ,2 0 0 0 (inpress) .
2 KingRW ,ShenF ,BurchfielBC ,etal.GeodeticmeasurementofcrustalmotioninsouthwestChina.Geology,1997,2 5,179～ 182 .
3 KirbyE ,WhippleKX ,Burchfie… 相似文献
9.
Initiation and evolution of the South China Sea: an overview 总被引：1，自引：0，他引：1
Weidong Sun 《中国地球化学学报》2016,35(3):215-225
Different models have been proposed for the formation and tectonic evolution of the South China Sea (SCS), including extrusion of the Indochina Peninsula, backarc extension, two-stage opening, proto-SCS dragging, extension induced by a mantle plume, and integrated models that combine diverse factors. Among these, the extrusion model has gained the most attention. Based on simplified physical experiments, this model proposes that collision between the Indian and Eurasian Plates resulted in extrusion of the Indochina Peninsula, which in turn led to opening of the SCS. The extrusion of the Indochina Peninsula, however, should have led to preferential opening in the west side of the SCS, which is contrary to observations. Extensional models propose that the SCS was a backarc basin, rifted off the South China Block. Most of the backarc extension models, however, are not compatible with observations in terms of either age or subduction direction. The two-stage extension model is based on extensional basins surrounding the SCS. Recent dating results indeed show two-stage opening in the SCS, but the Southwest Subbasin of the SCS is much younger, which contradicts the two-stage extension model. Here we propose a refined backarc extension model. There was a wide Neotethys Ocean between the Australian and Eurasian Plates before the Indian-Eurasian collision. The ocean floor started to subduct northward at ~125 Ma, causing backarc extension along the southern margin of the Eurasian Plate and the formation of the proto-SCS. The Neotethys subduction regime changed due to ridge subduction in the Late Cretaceous, resulting in fold-belts, uplifting, erosion, and widespread unconformities. It may also have led to the subduction of the proto-SCS. Flat subduction of the ridge may have reached further north and resulted in another backarc extension that formed the SCS. The rollback of the flat subducting slab might have occurred ~90 Ma ago; the second backarc extension may have initiated between 50 and 45 Ma. The opening of the Southwest Subbasin is roughly simultaneous with a ridge jump in the East Subbasin, which implies major tectonic changes in the surrounding regions, likely related to major changes in the extrusion of the Indochina Peninsula. 相似文献
10.
R. J. Coventry 《Australian Journal of Earth Sciences》2013,60(4):579-583
The Drummond Basin represents a major, backarc extensional system located at the inboard margin of the northern New England Orogen. Its synrift (cycle 1) infill is distinctively volcanic and volcani‐clastic in character and displays complex facies relationships and considerable variations in thickness controlled by the history and fabric of extensional faulting and the distribution of coeval volcanic centres. Subtle inheritance signatures in the age spectra obtained by SHRIMP (II) Pb‐U dating of zircons from volcanic units have impeded age assignment. New geochronologic data indicate that basinal subsidence was initiated in the north in latest Devonian (Famennian) time but was delayed until the Early Carboniferous (Tournaisian) in the south. Northern successions are dominated by volcaniclastic strata that accumulated distal to the loci of contemporary volcanism, whereas southern successions are dominated by silicic flows and ash‐flow tuffs and associated hypabyssal intrusive suites proximal to, or coincident with, volcanic loci. The Burdekin, Clarke River and Bundock Creek Basins located north of the Drummond Basin are broadly coeval features with comparable Infill. They likewise represent backarc basins developed inboard of the northern New England Orogen which trends offshore at latitude 20°S and appears to be represented in basement cores recovered from the Coral Sea. Calc‐alkaline magmatism of Late Devonian‐Early Carboniferous age extended at least 400 km inboard of the Gondwanan plate margin now represented in Queensland and related to an acute angle of subduction along the active margin at that time. 相似文献
11.
Folds and thrust faults formed by layer-parallel shortening coaxial with extensional structures such as normal dip-slip faults and ductile necking structures with orthorhombic fabric symmetry are usual, but little-recognised structures formed within normal dip-slip shear zones bounding rifts. They are generated because of the shear distribution in a zone of progressive deformation and may be later extended and disrupted depending on which part of the strain ellipsoid they may be located. We here describe folds and thrust faults from the southern margin of the Ala?ehir Rift in western Turkey as an opportunity to discuss the properties of pure extension–related structures formed by layer-parallel shortening. Such structures are more commonly generated during the early stages of rifting, when deformation rates are slow and the shear zones broader than those forming later in the life of a rift when strain rates are usually higher. Such structures have commonly been mistaken for witnesses documenting regional episodes of shortening rather than as integral parts of the extensional structures forming rifts. Not all layer-parallel shortening-related structures therefore indicate regional shortening. We plead that hasty statements concerning the meaning of geological structures at all scales be avoided before a thorough understanding of bulk strains that have affected a region are properly understood. 相似文献
12.
We demonstrate that conventional palaeoseismic trenching and mapping techniques that do not account for the effects of off‐fault deformation can significantly underestimate a fault’s slip rate. Using combined interpretations of 3‐D ground‐penetrating radar (GPR) and palaeoseismic trench data, we show that drag folding and hangingwall and footwall horizontal‐axis rotations have accommodated up to 41% of total extension across a normal fault within the Taupo Rift, New Zealand, over the past 24.6 ± 1.0 cal. ka BP. Our results may explain why geologically determined fault‐slip rates for the central and southern Taupo Rift are anomalously low when compared with geodetic estimates. We suggest that a combination of GPR surveying and palaeoseismic trenching may help resolve differences between geodetically and geologically determined strain rates observed across active extensional regimes worldwide. 相似文献
13.
青藏高原东缘龙门山冲断带与四川盆地的现今构造表现:数字地形和地震活动证据 总被引：27，自引：8，他引：27
龙门山冲断带位于四川盆地与青藏高原东缘之间,其现今地貌和构造活动表现对于理解青藏高原东缘和四川盆地晚新生代的演化具有非常重要的意义。已有的认识多数是从“山”的角度得出的,我们尝试从“盆”这一角度,利用近20年来的地震活动资料和地震反射剖面,结合数字高程模型(DEM),通过三维可视化分析软件来探讨四川盆地及龙门山的地貌特征和现代构造活动表现。初步研究结果表明:1)龙门山的现今地貌和地震分布具有明显的南北分段性;2)青藏高原东缘活动块体边界表现为由龙门山南段北东向构造在安县附近转折为岷山的南北向构造;3)龙门山南段的现代地震活动已深入四川盆地内部,形成地壳规模的楔形逆冲构造,地震活动、现代地貌和地震反射剖面的证据揭示了龙门山及四川盆地存在晚新生代构造缩短的可能性。 相似文献
14.
D.P. Gladkochub T.V. Donskaya V.S. Fedorovsky A.M. Mazukabzov A.N. Larionov S.A. Sergeev 《Russian Geology and Geophysics》2010,51(5):447-460
We report data from the Khadarta, Khoboi, and Orso metamorphic complexes of the Olkhon terrane in the western Baikal region. High-grade rocks in the three complexes may have been derived from active continental margin rocks (island arc–backarc basin system). The backarc basin history possibly began at 840–800 Ma, according to SHRIMP-II U-Pb zircon ages of the Orso gneiss. Many tectonic units in the Olkhon terrane belonged to the active margin of the Barguzin microcontinent which rifted off the Aldan province of the Siberian craton in the early Neoproterozoic. The accretion of the microcontinent to the craton was accompanied by high-grade metamorphism recorded in the Khadarta and Khoboi granulites. The 507 ± 8 Ma and 498 ± 7 Ma SHRIMP-II U-Pb zircon ages of the latter complexes, respectively, may refer to the earliest evolution stage of the Olkhon metamorphic terrane. New data for the Olkhon terrane agree well with the ages of other high-grade complexes along the southern Siberian craton (Slyudyanka, Kitoikin, Derba) and correspond to the initiation of the Central Asian orogen. With these data, the Olkhon metamorphic terrane has been interpreted as an Early Paleozoic collisional collage of fragments of the microcontinent’s Neoproterozoic active margin. 相似文献
15.
青藏高原现今构造变形特征与GPS速度场 总被引：105，自引：12，他引：105
文章以青藏高原的GPS观测数据为基础 ,结合活动地质构造资料 ,研究了青藏高原的现今构造变形状态和机制 ,并探讨青藏高原现今构造变形所反映的大陆内部动力学过程。GPS观测的速度矢量揭示了青藏高原整体向北和向东运动的趋势 ,平行于印度和欧亚板块碰撞方向上的地壳缩短量约是 38mm/a ,而青藏高原周边主要断裂带的滑动速率均在 10mm/a以下。大约 90 %的印度与欧亚板块相对运动量被青藏高原的地壳缩短所吸收和调节。GPS速度矢量由南向北逐渐向东偏转 ,向东的分量也增加 ,形成了以羌塘地块北部 (或玛尼—玉树—鲜水河断裂 )和祁连山中部为中心的两个地壳物质向东流动带。青藏高原的向东挤出实际上是地壳物质在印度板块推挤下和周边刚性地块阻挡下围绕东构造结发生的顺时针旋转。 相似文献
16.
The Antarctic Ross Orogen was built up during the early Paleozoic in the framework of the convergence between the Paleo-Pacific oceanic plate and the Gondwana continental margin. Models for the Ross Orogen in northern Victoria Land are based on terranes having a variable provenance with respect to the margin. However, recent studies provide evidence for the occurrence of different pieces of the lithospheric puzzle: (i) the Wilson continental magmatic arc, representing the main part of the active Gondwana margin, (ii) the Bowers arc–backarc system, (iii) the Admiralty crustal ribbon including continental material of the Wilson forearc, and (iv) the newly discovered, Cambrian oceanic magmatic Tiger arc, along the Ross Sea coast. An updated model is presented in which, after the Early Cambrian magmatic activity of the Wilson arc, a retreat of the subduction zone in the Early–Middle Cambrian gave way to boudinage of the Wilson forearc, trenchward arc migration, opening of the Bowers backarc basin and inception of the outboard Tiger subduction zone. Renewed convergence resulted in the development of the Middle Cambrian Bowers arc, closure of the backarc and deep underthrusting of portions of it at the Middle–Late Cambrian. Finally, in the latest Cambrian to earliest Ordovician, fast exhumation was coupled in the north with erosion and sediment shed to the northeast, and with extension and potassic magmatism in central and southern Victoria Land. 相似文献
17.
青藏高原东缘旋转变形机制的数值模拟 总被引：1，自引：0，他引：1
在印度板块与欧亚板块的碰撞作用下,青藏高原受到华南块体、鄂尔多斯块体等不同程度的阻挡,引起高原的整体隆升。青藏高原东南缘发生物质向南"逃逸",青藏高原东缘现今的地壳运动表现为围绕青藏高原东构造结发生顺时针的旋转。针对青藏高原东缘的旋转变形特征,基于以大型活动断裂为界的块体构造模型,利用粘弹性接触单元有限元模拟,分析了控制青藏高原东缘旋转变形的动力学环境,模拟的GPS速度与实测GPS速度能够较好的地吻合,构造应力场分布特征和活动断层的性质也能够较大程度地吻合,模拟过程采用的边界及其代表的动力学环境表明,青藏高原东缘整体受控于印度板块的持续碰撞和稳定的华南板块的阻挡,在下地壳的拖曳和重力作用下,青藏高原物质从南部边界"逃逸"。在"逃逸"过程中,受印度板块斜向俯冲作用的影响,沿实皆断裂缅甸板块对巽他板块的剪切拉升作用是形成围绕喜马拉雅东构造结的旋转运动和地壳变形的重要因素,也是青藏高原东南缘旋转活动构造体系的主要影响因素之一。 相似文献
18.
Abdelkarim Yelles Jacques Déverchère Rabah Bracène Pierre Strzerzynski Guillaume Bertrand Thierry Winter Pascal Le Roy Hamou Djellit 《Tectonophysics》2009,475(1):98-116
The Algiers region, northern Algeria, is known to be seismically active, with recurrent large (M>6) earthquakes. Because of the lack of high-resolution bathymetry, the offshore structures remained for a long time poorly known. Thanks to a new marine data base (MARADJA 2003 cruise), the offshore part of the margin is accurately mapped, and new active and recent structures are described. West of the bay of Algiers, the margin enlarges, forming the Khayr al Din bank, interpreted as a tilted block of the passive margin born during the opening of the Algero-Provençal basin. At the slope break, a 80 km-long fault-tip Quaternary fold, namely the Khayr al Din fault, extends at the foot of the margin off NW Algiers and represents the largest active structure of the coastal area, together with the Sahel anticline. We also map for the first time a set of overlapping, en echelon active folds in the upper part of the Khayr al Din bank, located off previously known active structures on land. Most of these faults represent actually a threat for the Algiers region in terms of seismic hazard but also geological hazards, such as tsunamis, as most of them depicts significant dimensions and slip rates. The highest long-term horizontal shortening rate is found on the Khayr al Din fault and is estimated at 0.5 ± 0.1 mm/yr, with a maximal magnitude of 7.3, which provides one of the highest seismogenic potential in the region.A new tectonic framework for the Algiers region is proposed, in which the main south-dipping offshore structure, of opposite vergence relative to most thrusts on land, appears to be nowadays the main driving fault system, as also found further east in the Boumerdès (M 6.8) 2003 rupture zone. The overall apparent pop-up structure of the recent and active faults may result from a progressive migration of the plate limit from the Late Miocene, north-dipping suture zone on land, to the Quaternary, south-dipping main Khayr al Din fault at sea, suggesting a process of subduction inception. 相似文献
19.
《International Geology Review》2012,54(8):661-735
The Longmen Shan region includes, from west to east, the northeastern part of the Tibetan Plateau, the Sichuan Basin, and the eastern part of the eastern Sichuan fold-and-thrust belt. In the northeast, it merges with the Micang Shan, a part of the Qinling Mountains. The Longmen Shan region can be divided into two major tectonic elements: (1) an autochthon/parautochthon, which underlies the easternmost part of the Tibetan Plateau, the Sichuan Basin, and the eastern Sichuan fold-and-thrust belt; and (2) a complex allochthon, which underlies the eastern part of the Tibetan Plateau. The allochthon was emplaced toward the southeast during Late Triassic time, and it and the western part of the autochthon/parautochthon were modified by Cenozoic deformation. The autochthon/parautochthon was formed from the western part of the Yangtze platform and consists of a Proterozoic basement covered by a thin, incomplete succession of Late Proterozoic to Middle Triassic shallow-marine and nonmarine sedimentary rocks interrupted by Permian extension and basic magmatism in the southwest. The platform is bounded by continental margins that formed in Silurian time to the west and in Late Proterozoic time to the north. Within the southwestern part of the platform is the narrow N-trending Kungdian high, a paleogeographic unit that was positive during part of Paleozoic time and whose crest is characterized by nonmarine Upper Triassic rocks unconformably overlying Proterozoic basement. In the western part of the Longmen Shan region, the allochthon is composed mainly of a very thick succession of strongly folded Middle and Upper Triassic Songpan Ganzi flysch. Along the eastern side and at the base of the allochthon, pre-Upper Triassic rocks crop out, forming the only exposures of the western margin of the Yangtze platform. Here, Upper Proterozoic to Ordovician, mainly shallow-marine rocks unconformably overlie Yangtze-type Proterozic basement rocks, but in Silurian time a thick section of fine-grained clastic and carbonate rocks were deposited, marking the initial subsidence of the western Yangtze platform and formation of a continental margin. Similar deep-water rocks were deposited throughout Devonian to Middle Triassic time, when Songpan Ganzi flysch deposition began. Permian conglomerate and basic volcanic rocks in the southeastern part of the allochthon indicate a second period of extension along the continental margin. Evidence suggests that the deep-water region along and west of the Yangtze continental margin was underlain mostly by thin continental crust, but its westernmost part may have contained areas underlain by oceanic crust. In the northern part of the Longmen Shan allochthon, thick Devonian to Upper Triassic shallow-water deposits of the Xue Shan platform are flanked by deep-marine rocks and the platform is interpreted to be a fragment of the Qinling continental margin transported westward during early Mesozoic transpressive tectonism. In the Longmen Shan region, the allochthon, carrying the western part of the Yangtze continental margin and Songpan Ganzi flysch, was emplaced to the southeast above rocks of the Yangtze platform autochthon. The eastern margin of the allochthon in the northern Longmen Shan is unconformably overlapped by both Lower and Middle Jurassic strata that are continuous with rocks of the autochthon. Folded rocks of the allochthon are unconformably overlapped by Lower and Middle Jurassic rocks in rare outcrops in the northern part of the region. They also are extensively intruded by a poorly dated, generally undeformed belt, of plutons whose ages (mostly K/Ar ages) range from Late Triassic to early Cenozoic, but most of the reliable ages are early Mesozoic. All evidence indicates that the major deformation within the allochthon is Late Triassic/Early Jurassic in age (Indosinian). The eastern front of the allochthon trends southwest across the present mountain front, so it lies along the mountain front in the northeast, but is located well to the west of the present mountain front on the south. The Late Triassic deformation is characterized by upright to overturned folded and refolded Triassic flysch, with generally NW-trending axial traces in the western part of the region. Folds and thrust faults curve to the north when traced to the east, so that along the eastern front of the allochthon structures trend northeast, involve pre-Triassic rocks, and parallel the eastern boundary of the allochthon. The curvature of structural trends is interpreted as forming part of a left-lateral transpressive boundary developed during emplacement of the allochthon. Regionally, the Longmen Shan lies along a NE-trending transpressive margin of the Yangtze platform within a broad zone of generally N-S shortening. North of the Longmen Shan region, northward subduction led to collision of the South and North China continental fragments along the Qinling Mountains, but northwest of the Longmen Shan region, subduction led to shortening within the Songpan Ganzi flysch basin, forming a detached fold-and-thrust belt. South of the Longmen Shan region, the flysch basin is bounded by the Shaluli Shan/Chola Shan arc—an originally Sfacing arc that reversed polarity in Late Triassic time, leading to shortening along the southern margin of the Songpan Ganzi flysch belt. Shortening within the flysch belt was oblique to the Yangtze continental margin such that the allochthon in the Longmen Shan region was emplaced within a left-lateral transpressive environment. Possible clockwise rotation of the Yangtze platform (part of the South China continental fragment) also may have contributed to left-lateral transpression with SE-directed shortening. During left-lateral transpression, the Xue Shan platform was displaced southwestward from the Qinling orogen and incorporated into the Longmen Shan allochthon. Westward movement of the platform caused complex refolding in the northern part of the Longmen Shan region. Emplacement of the allochthon flexurally loaded the western part of the Yangtze platform autochthon, forming a Late Triassic foredeep. Foredeep deposition, often involving thick conglomerate units derived from the west, continued from Middle Jurassic into Cretaceous time, although evidence for deformation of this age in the allochthon is generally lacking. Folding in the eastern Sichuan fold-and-thrust belt along the eastern side of the Sichuan Basin can be dated as Late Jurassic or Early Cretaceous in age, but only in areas 100 km east of the westernmost folds. Folding and thrusting was related to convergent activity far to the east along the eastern margin of South China. The westernmost folds trend southwest and merge to the south with folds and locally form refolded folds that involve Upper Cretaceous and lower Cenozoic rocks. The boundary between Cenozoic and late Mesozoic folding on the eastern and southern margins of the Sichuan Basin remains poorly determined. The present mountainous eastern margin of the Tibetan Plateau in the Longmen Shan region is a consequence of Cenozoic deformation. It rises within 100 km from 500–600 m in the Sichuan Basin to peaks in the west reaching 5500 m and 7500 m in the north and south, respectively. West of these high peaks is the eastern part of the Tibetan Plateau, an area of low relief at an elevations of about 4000 m. Cenozoic deformation can be demonstrated in the autochthon of the southern Longmen Shan, where the stratigraphic sequence is without an angular unconformity from Paleozoic to Eocene or Oligocene time. During Cenozoic deformation, the western part of the Yangtze platform (part of the autochthon for Late Triassic deformation) was deformed into a N- to NE-trending foldandthrust belt. In its eastern part the fold-thrust belt is detached near the base of the platform succession and affects rocks within and along the western and southern margin of the Sichuan Basin, but to the west and south the detachment is within Proterozoic basement rocks. The westernmost structures of the fold-thrust belt form a belt of exposed basement massifs. During the middle and later part of the Cenozoic deformation, strike-slip faulting became important; the fold-thrust belt became partly right-lateral transpressive in the central and northeastern Longmen Shan. The southern part of the fold-thrust belt has a more complex evolution. Early Nto NE-trending folds and thrust faults are deformed by NW-trending basementinvolved folds and thrust faults that intersect with the NE-trending right-lateral strike-slip faults. Youngest structures in this southern area are dominated by left-lateral transpression related to movement on the Xianshuihe fault system. The extent of Cenozoic deformation within the area underlain by the early Mesozoic allochthon remains unknown, because of the absence of rocks of the appropriate age to date Cenozoic deformation. Klippen of the allochthon were emplaced above the Cenozoic fold-andthrust belt in the central part of the eastern Longmen Shan, indicating that the allochthon was at least partly reactivated during Cenozoic time. Only in the Min Shan in the northern part of the allochthon is Cenozoic deformation demonstrated along two active zones of E-W shortening and associated left-slip. These structures trend obliquely across early Mesozoic structures and are probably related to shortening transferred from a major zone of active left-slip faulting that trends through the western Qinling Mountains. Active deformation is along the left-slip transpressive NW-trending Xianshuihe fault zone in the south, right-slip transpression along several major NE-trending faults in the central and northeastern Longmen Shan, and E-W shortening with minor left-slip movement along the Min Jiang and Huya fault zones in the north. Our estimates of Cenozoic shortening along the eastern margin of the Tibetan Plateau appear to be inadequate to account for the thick crust and high elevation of the plateau. We suggest here that the thick crust and high elevation is caused by lateral flow of the middle and lower crust eastward from the central part of the plateau and only minor crustal shortening in the upper crust. Upper crustal structure is largely controlled in the Longmen Shan region by older crustal anisotropics; thus shortening and eastward movement of upper crustal material is characterized by irregular deformation localized along older structural boundaries. 相似文献
20.
R. A. Glen 《Australian Journal of Earth Sciences》2013,60(3):315-370
The well-known southwest-to-northeast younging of stratigraphy over a present-day cross strike distance of >1500 km in the southern Tasmanides of eastern Australia has been used to argue for models of accretionary orogenesis behind a continually eastwards-rolling paleo-Pacific plate. However, these accretionary models need modification, since the oldest (ca 530 Ma) outcrops of Cambrian supra-subduction zone rocks occur in the outboard New England Orogen, now ～900 km east of the next oldest (520–510 Ma) supra-subduction zone rocks. This is not consistent with simple, continuous easterly rollback. Instead, the southern Tasmanides contain an early history characterised by a westwards-migrating margin between ca 530 and ca 520 Ma, followed by rapid eastwards rollback of the paleo-Pacific plate from 520 to 502 Ma that opened a vast backarc basin ～2000 km across that has never been closed. From the Ordovician through to the end of the Carboniferous, the almost vertical stacking of continental margin arcs (within a hundred kilometres of each other) in the New England Orogen indicates a constant west-dipping plate boundary in a Gondwana reference frame. Although the actual position of the boundary is inferred to have undergone contraction-related advances and extension-related retreats, these movements are estimated to be ～250 km or less. Rollback in the early Permian was never completely reversed, so that late Permian–Triassic to Cretaceous arcs lie farther east, in the very eastern part of eastern Australia, with rifted fragments occurring in the Lord Howe Rise and in New Zealand. The northern Tasmanides are even more anomalous, since they missed out on the middle Cambrian plate boundary retreat seen in the south. As a result, their Cambrian-to-Devonian history is concentrated in a ～300 km wide strip immediately west of Precambrian cratonic Australia and above Precambrian basement. The presence in this narrow region of Ordovician to Carboniferous continental margin arcs and backarc basins also implies a virtually stationary plate boundary in a Gondwana frame of reference. This bipolar character of the Tasmanides suggests the presence of a segmented paleo-Pacific Plate, with major transform faults propagating into the Tasmanides as tear faults that were favourably oriented for the formation of local supra-subduction zone systems and for subsequent intraplate north–south shortening. In this interpretation of the Tasmanides, Lower–Middle Ordovician quartz-rich turbidites accumulated as submarine fan sequences, and do not represent multiple subduction complexes developed above subduction zones lying behind the plate boundary. Indeed, the Tasmanides are characterised by the general absence of material accreted from the paleo-Pacific plate and by the dominance of craton-derived, recycled sedimentary rocks. 相似文献