非迁移潮作用下的电离层赤道异常区单峰现象及其经度分布          下载免费PDF全文

田耀宇  郝永强  张东和  肖佐 《地球物理学报》2019,62(11):4067-4081

当喷泉效应较弱而双峰结构发展不充分的时候，可能在赤道异常区仅能够观测到一个电子密度的峰值，称之为单峰现象.本文利用CHAllenging Minisatellite Payload卫星在2001-2010年的电子密度数据给出了单峰的发生规律，单峰在地方时早上08：00-10：00和下午16：00-19：00发生率高，发生位置在经度上呈现多波数分布，尤其在10：00-18：00明显：在分季时多呈现四波，而在冬至季时以三波为主.单峰发生多的经度，正好对应着双峰的结构特征较弱之处.究其原因，是非迁移潮的DE2和DE3分量调制了背景风场和大气发电机电场，在电场和喷泉效应减弱的经度，双峰结构难以形成时，就会表现为单峰结构.本文扩展了对单峰现象的地方时、季节和经度分布等规律的了解，明确了非迁移潮在其中施加的影响，由此，单峰同双峰现象一样可以用于研究非迁移潮对热层-电离层的作用.  相似文献   

函数模型与随机模型双约束的GPS-InSAR数据融合方法建立三维形变场     

马艳鸽  赵丽华  张盼盼  吕佳凝 《大地测量与地球动力学》2019,39(11):1112-1117

针对InSAR技术研究地表三维形变时监测信息不足的问题，以GPS监测信息为先验信息，建立附有随机模型约束的地表三维形变模型。考虑到SAR卫星极轨方式运行导致LOS向观测量对南北向形变不敏感的问题，以GPS南北向形变观测值作为强约束，构建三维形变解算的函数约束条件。模拟数据与西安地区实测数据的计算结果表明，基于随机模型与函数模型共同约束的地表三维形变参数最小二乘解的精度优于仅有函数模型约束或仅有随机模型约束及无任何约束的参数解精度。  相似文献   

辛安煤矿1402工作面临空窄煤柱采掘响应及动态加固     

汪北方  梁冰  刘维  张晶  迟海波  刘亚辉 《煤田地质与勘探》2020,48(1):145-153

随着我国煤炭资源去产能整合煤矿的增多，复采工作面临空窄煤柱采动失稳问题日益凸显，已严重制约矿井安全高效生产。为此，针对辛安煤矿复采1402工作面辅运巷道5号钻场临空窄煤柱稳定性控制的工程难题，运用数值模拟与理论分析相结合的方法，探究5号钻场临空窄煤柱稳定性采掘扰动响应特征，提出5号钻场临空窄煤柱动态注浆加固技术方案并开展现场应用和效果检验。研究结果表明:1402工作面辅运巷道掘进对5号钻场临空窄煤柱稳定性影响较小；在1402工作面回采期间，距5号钻场18~6 m范围，临空窄煤柱集中垂直应力由非对称马鞍形分布逐渐过渡为拱形分布；距5号钻场6 m时，临空窄煤柱承载叠加垂直应力超过煤体强度，塑性区完全贯通，极易破坏失稳；现场采用MP364型注浆材料及专用注浆设备对5号钻场临空窄煤柱前后5 m区域进行加固，动态注浆始终超前工作面10 m，通过深孔窥视和气体监测手段验证临空窄煤柱良好的封堵固化效果，保障了工作面安全回采，为我国整合矿井类似条件下煤柱稳定性控制提供借鉴和参考。移动阅读   相似文献   

高压旋喷桩单桩承载力分析     

王勃  行小盈 《岩土工程技术》2020,(1):48-52

高压喷射注浆于1968年首创于日本。我国于20世纪70年代初相继引进并开始研究高压喷射注浆技术。目前,高压旋喷工艺应用最为广泛,工艺技术最为成熟。对旋喷桩成桩质量及单桩承载力进行研究分析,为旋喷桩在地基与基础工程、水利水电工程、止水、加固工程中的应用提供设计参考依据。该试验在陕西省延安市某建成小区内选三个试验点,按不同旋喷桩施工工艺成桩,通过对桩身完整性检测、单桩承载力试验,分析旋喷桩成桩质量及单桩承载力。  相似文献   

广西忻城福六浪洼地堵洞成库施工实践          下载免费PDF全文

邓忠  韦兴标  何德顺 《探矿工程》2020,47(11):61-69

为解决广西忻城县城关镇弄长村一带万余人饮水问题及该岩溶石山区干旱农田引水灌溉问题，在广西忻城县隆光地下河福六浪洼地3号天窗下游钻取了投料孔和帷幕灌浆孔，先在投料孔投放碎石骨料，后在帷幕灌浆孔内灌入水泥砂浆或水泥浆液对先期投放的碎石骨料进行固结，修筑地下堵体防渗帷幕对流经福六浪洼地的隆光地下河管道实施堵截，成功地截住了隆光地下河水向下游排泄量，减少了洼地积水通过天窗、落水洞向下游的渗漏量，增加了天窗向洼地的溢洪量，建成了库容约250万m3的溶洼水库，基本解决了城关镇弄长村一带万余人生活饮水难的问题，提高了该溶洼水库周边、岩溶大石山区干旱农田灌溉水平和改善了当地村民的饮水条件。  相似文献   

The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials     

Weihan Li  Jian‐Ming Zhu  Decan Tan  Guilin Han  Zhouqiao Zhao  Guangliang Wu 《Geostandards and Geoanalytical Research》2020,44(3):523-535

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.  相似文献   

Determination of Radiogenic 87Sr/86Sr and Stable δ88/86SrSRM987 Isotope Values of Thirteen Mineral,Vegetal and Animal Reference Materials by DS‐TIMS     

Jean‐Michel Brazier  Anne‐Dsire Schmitt  Eric Pelt  Damien Lemarchand  Sophie Gangloff  Tho Tacail  Vincent Balter 《Geostandards and Geoanalytical Research》2020,44(2):331-348

This work presents new ⁸⁷Sr/⁸⁶Sr and δ^88/86Sr_SRM987 isotopic values of thirteen mineral, vegetal and animal reference materials. Except for UB‐N, all our results are consistent with previously published data. Our results highlight intermediate precisions among the best presently published and a non‐significant systematic shift with the calculated δ^88/86Sr_SRM987 mean values for the three most analysed reference materials in the literature (i.e., IAPSO, BCR‐2 and JCp‐1). By comparison with the literature and between two distinct digestions, a significant bias of δ^88/86Sr_SRM987 values was highlighted for two reference materials (UB‐N and GS‐N). It has also been shown that digestion protocols (nitric and multi‐acid) have a moderate impact on the δ^88/86Sr_SRM987 isotopic values for the Jls‐1 reference materials suggesting that a nitric acid digestion of carbonate can be used without significant bias from partial digestion of non‐carbonate impurities. Different δ^88/86Sr_SRM987 values were measured after two independent Sr/matrix separations, according to the same protocol, for a fat‐rich organic reference material (BCR‐380R) and have been related to a potential post‐digestion heterogeneity. Finally, the δ^88/86Sr_SRM987 value differences measured between animal‐vegetal and between coral‐seawater reference materials agree with the previously published results, highlighting an Sr isotopic fractionation along the trophic chain and during carbonate precipitation.  相似文献   

Barium Isotopic Compositions in Thirty‐Four Geological Reference Materials Analysed by MC‐ICP‐MS     

Ya‐Jun An  Xin Li  Zhao‐Feng Zhang 《Geostandards and Geoanalytical Research》2020,44(1):183-199

Measurement of Ba isotope ratios of widely available reference materials is required for interlaboratory comparison of data. Here, we present new Ba isotope data for thirty‐four geological reference materials, including silicates, carbonates, river/marine sediments and soils. These reference materials (RMs) cover a wide range of compositions, with Ba mass fractions ranging from 6.4 to 1900 µg g^?1, SiO₂ from 0.62% to 90.36% m/m and MgO from 0.08% to 41.03% m/m. Accuracy and precision of our data were assessed by the analyses of duplicate samples and USGS rock RMs. Barium isotopic compositions for all RMs were in agreement with each other within uncertainty. The variation of δ^138/134Ba in these RMs was up to 0.7‰. The shale reference sample, affected by a high degree of chemical weathering, had the highest δ^138/134Ba (0.37 ± 0.03‰), while the stream sediment obtained from a tributary draining carbonate rocks was characterised by the lowest δ^138/134Ba (?0.30 ± 0.05‰). Geochemical RMs play a fundamental role in the high‐precision and accurate determination of Ba isotopic compositions for natural samples with similar matrices. Analyses of these RMs could provide universal comparability for Ba isotope data and enable assessment of accuracy for interlaboratory data.  相似文献   

圆钢管约束高强灌浆料局部承压性能研究          下载免费PDF全文

张啸驰  陈建伟  闫文赏  郑玲玲 《地震工程学报》2018,40(3):612-618

以圆钢管约束高强灌浆料局部承压性能试验为基础,基于ABAQUS有限元计算平台,通过建立分段模型(Multi-section Model简称MSM模型)进行数值模拟,探究圆钢管约束高强灌浆料在局部承压作用下的力学性能,并将软件计算得到的荷载-位移曲线与试验结果进行对比分析。结果表明,分段模型适用于圆钢管约束高强灌浆料局部承压作用下的数值模拟,且计算结果与试验结果吻合较好;增大试件高径比、钢管壁厚和高强灌浆料强度均可提高其极限承载力。  相似文献   

GPS掩星气压的评估及质量控制          下载免费PDF全文

程凯琪  郭启云  杨荣康  李昌兴 《大气科学学报》2021,44(4):529-539

以探空数据为参考,将2014年1月1日—12月31日的COSMIC掩星气压作为GPS掩星试验样本,将中国区域划分为4个气候区,从双权重平均值、双权重标准差及相关系数角度对GPS掩星气压进行评估,并根据其统计结果进行质量控制。结果显示:双权重平均值和双权重标准差相较传统方法统计出的平均值和标准差更不易受异常数据的影响,评估结果更加准确。4个气候区之间气压的双权重平均值差异较小;双权重标准差在亚热带季风气候区的数值较小(小于6 hPa)、在温带季风气候区较大(最大可达15 hPa)。以探空数据为参考,气压偏差的统计表明,亚热带季风气候区从低层到高层都为正偏差(0.8 hPa左右),其他三个气候区在6 km以下多为负偏差、6 km以上为正偏差(0.5 hPa左右)。根据相关系数的统计,将相关系数确定为0.80,并根据各气候区不同的统计结果划分阈值区间;质量控制结果显示,错误点大多分布在GPS掩星气压与探空气压相差较大的区域,两步质量控制的错误数据百分比大部分在5%以内;对比质量控制前后GPS掩星气压与探空气压之间的相关系数表明,质量控制后两者的相关性得到明显改善。  相似文献