2017-08-09新疆精河Ms6.6地震附近区域相对应变的变化分析     

高丽娟  邢喜民  高歌  李尚伟 《大地测量与地球动力学》2019,39(10):1002-1006

2017年精河M_S6.6地震震前，尼勒克、巴伦台和小泉沟台钻孔应变仪记录到显著的应变变化，经现场落实确认，异常是可靠的。根据这3个台的记录资料计算相对应变的变化，结果表明，地震前最大（小）主应变大小和方向分别出现明显加速和急剧偏转变化。此外还发现，相对应变场异常期间主方向与震源机制解P轴方位较为一致。  相似文献   

关于改进的Encke方法中参考轨道的选择和校正     

刘林  胡松杰 《天文学报》1996,37(3):285-293

对于改进的Ｅｎｃｋｅ方法，选择适当的参考轨道是一个关键．然而，对于人造地球卫星长弧轨道计算，目前所给出的几种参考轨道均需要逐段校正，这将给定轨问题带来附加的复杂性．本文将仔细探讨如何选择参考轨道和减少校正次数．  相似文献   

地下洞库勘察中的深斜孔钻探和压水试验技术          下载免费PDF全文

吉孟瑞  孙桂明  吴昌庆  原华山 《山东国土资源》2001,17(2):56-60

青岛市黄岛区拟建设海底地下油气储藏库,前期地质勘察工作要求施工倾角45°、深220m的取心钻孔4个,并在孔内分段进行压水试验.本文介绍了如何利用XY-4型金刚石小口径钻机施工基岩深斜孔及压水试验技术.  相似文献   

Prediction of lateral variability in fracture intensity using multicomponent shear-wave surface seismic as a precursor to horizontal drilling in the Austin Chalk   总被引：1，自引：0，他引：1  

Michael C. Mueller 《Geophysical Journal International》1991,107(3):409-415

  相似文献   

Optimization of grid-drilling using computer simulation     

J. William Miller Jr. 《Mathematical Geology》1991,23(2):201-218

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.  相似文献   

鲁西北西向断裂系晚中生代活动的几何学、运动学及年代学研究     

王先美 《地质学报》2008,82(1):1258-1273

鲁西隆起区发育有大量的北西向脆性断裂。依据野外断裂构造的几何学、运动学详细解析认为,北西向断裂系经历了早期的右行压剪、右行张剪,以及后期的左行压剪等不同性质的构造活动。由与北西向断裂活动相伴生的同期侵入岩体的 K-Ar测试结果分析,北西向断裂系在距今约160 Ma及距今130~110 Ma分别经历了右行压剪与右行张剪构造活动;通过分布在隆起区不同样品的磷灰石裂变径迹数据分析、冷却史反演,厘定鲁西地体在距今90~80 Ma存在一次区域性快速冷却构造事件,该构造事件与北西向断裂系的左行压剪构造活动相对应。  相似文献   

准噶尔盆地周缘山脉抬升-剥露过程的FT证据   总被引：6，自引：3，他引：3  

李丽  陈正乐  祁万修  王世新  陈宣华  吴益平  宫红良  魏新昌  杨屹  李学智 《岩石学报》2008,24(5)

本文主要通过磷灰石裂变径迹测年结果结合温度.时间热模拟反演的研究,探讨准噶尔盆地周缘造山带的抬升.剥露作用过程及其差异性特征.研究结果表明,准噶尔周缘造山带自晚三叠世至新近纪至少经历三次大的抬升-剥露事件,结合样品位置分析,推测准噶尔盆地周缘造山带的抬升-剥露作用具有明显不均一特征.始于晚三叠-早侏罗世的山脉抬升作用范围有限,仅局限于准噶尔东北缘;但是,发生在中-晚白垩世(～115～95Ma)的这期构造抬升作用在盆地周缘的所有山系都有记录;古近纪早期(～60～50Ma)在准噶尔盆地北缘有一期隆升事件,但该事件也仅仅局限于盆地北缘;新近纪～25Ma以来发生在巴里坤(博格达山)的局部抬升冷却事件,仅仅局限于天山北缘,而此时准噶尔盆地的东西两侧山脉可能相对稳定.推测该期抬升事件应是印-亚碰撞的远程效应在天山地区的构造表现.  相似文献   

JD直连式深孔绳索取心钻杆的研制与应用          下载免费PDF全文

许华松  覃强华  熊海书 《探矿工程》2008,35(10):33-35

根据深部找矿的需要,立足于我国目前钻探设备现状和材料冶炼及机械加工水平,通过对钻杆选材、结构、制造工艺的创新,研制了一种两端镦粗后整体热处理再车螺纹的新型深孔绳索取心钻杆及配套钻具,经使用,效果达到了设计要求。  相似文献   

旋流除砂机理研究及自动旋流除砂器的开发          下载免费PDF全文

张学强  鄢泰宁 《探矿工程》2008,35(11):34-36

旋流除砂技术是利用离心力从泥浆中分离固相成分的技术,可广泛应用在地质钻探、有色、冶金工业及石油天然气工业领域。研制开发的自动旋流除砂器弥补了传统除砂器固相成分分离效果不佳、排砂口易堵的缺陷,显著提高泥浆或矿浆的净化质量与除砂效率,且能自动排堵,降低了除砂工作的时间消耗和成本。  相似文献   

水平定向钻进非开挖铺管技术市场分析     

袁明昕 《探矿工程》2008,35(10):49-51

重点分析了近几年我国水平定向钻进铺管钻机和施工市场的发展趋势,结合国外的水平定向钻进市场发展分析,总结了我国水平定向钻进技术与市场的发展态势。  相似文献