Experimental Study of a Command Governor Adaptive Depth Controller for an Unmanned Underwater Vehicle     

《Applied Ocean Research》2019

Unmanned Underwater Vehicles (UUVs) are increasingly being used in advanced applications that require them to operate in tandem with human divers and around underwater infrastructure and other vehicles. These applications require precise control of the UUVs which is challenging due to the non-linear and time varying nature of the hydrodynamic forces, presence of external disturbances, uncertainties and unexpected changes that can occur within the UUV’s operating environment. Adaptive control has been identified as a promising solution to achieve desired control within such dynamic environments. Nevertheless, adaptive control in its basic form, such as Model Reference Adaptive Control (MRAC) has a trade-off between the adaptation rate and transient performance. Even though, higher adaptation rates produce better performance they can lead to instabilities and actuator fatigue due to high frequency oscillations in the control signal. Command Governor Adaptive Control (CGAC) is a possible solution to achieve better transient performance at low adaptation rates. In this study CGAC has been experimentally validated for depth control of a UUV, which is a unique challenge due to the unavailability of full state measurement and a greater thrust requirement. These in turn leads to additional noise from state estimation, time-delays from input noise filters, higher energy expenditure and susceptibility to saturation. Experimental results show that CGAC is more robust against noise and time-delays and has lower energy expenditure and thruster saturation. In addition, CGAC offers better tracking, disturbance rejection and tolerance to partial thruster failure compared to the MRAC.  相似文献   

南海风暴潮对风场和外围海水敏感性研究     

李健  刘清容  阮成卿  訚忠辉  冀承振 《海洋科学》2018,42(2):99-107

为探索来自西北太平洋台风风暴潮与南海局地生成台风风暴潮不同,本研究在假设两种台风气象条件相同情况下,研究随台风而来外围海水所形成增水对南海沿岸的影响。以0814"黑格比"强台风风暴潮为基础,使用ROMS(regional ocean modeling system)模式进行数值模拟并通过设计对比试验方法进行研究,研究发现在台风登陆时引起的增水最大,最大增水出现在台风路径右侧,其中在沿岸区域,外围海水形成增水约占总增水10%,且大约3 h后出现增水回震现象。同时,设计对比试验,研究来自西北太平洋台风风暴潮对台风路径、台风强度、台风移动速度和流入角等气象条件敏感性,并获得与前人一致的结果。  相似文献   

解郁安神法联合体外反搏对PCI术后气滞血瘀型胸痹患者的临床疗效观察          下载免费PDF全文

王敏  徐新利  姜光萍 《应用海洋学学报》2020,36(12):1

目的：观察解郁安神法联合体外反搏（EECP）对经皮冠状动脉介入治疗（PCI）术后气滞血瘀型胸痹患者的临床疗效。方法：将80例冠心病PCI术后气滞血瘀型胸痹患者随机分为治疗组和对照组,每组各40例。对照组采用PCI术后规范化治疗,同时联合EECP治疗;治疗组在对照组基础上加服解郁安神方治疗,随访观察7周,比较2组临床证候疗效、Zung焦虑自评量表（SAS）评分、抑郁自评量表（SDS）评分、西雅图心绞痛调查量表（SAQ）评分。结果：总有效率治疗组为82.5%（33/40）,高于对照组的60.0%（24/40）,2组比较,差异有统计学意义（P<0.05）;2组SAS、SDS、SAQ评分治疗前后组内比较及治疗后组间比较,差异均有统计学意义（P<0.05）。结论：解郁安神法联合EECP治疗可明显改善PCI术后气滞血瘀型胸痹患者的临床症状,缓解焦虑抑郁程度,提高患者生活质量,值得临床推广应用。  相似文献   

CORROSION RESISTANCE OF INTERFERENCE FILM ON STAINLESS STEEL     

张经磊  侯保荣 《中国海洋湖沼学报》1997,15(4):363-368

IwrRODUcrlONStainlessstalhasbeenusedwidelyasbuildingrnateria1,especiallyasdecoratingrnate-rialinbuildings.Ordinarystainlesssteehasonlyonemonot0noussilverywhitCcolourwhichsomeimesdoesnotrnatchwithitSsurmundingenvironment.lnordert0improveitSdereratingperfonnaneeandexpanditsuse,muchresearchhasbeenconductedsincethe4O'st0trytoformabright,uniform,highcorrosi0nandwearresistantco1ourfilmonastainlesssteesurface.Duringtheeariystage,anirnmersionedhodwasused,i.e.inimrs-ingthestainlesssteelinahots0luti…  相似文献   

Application of micropolar plasticity to post failure analysis in geomechanics     

Majid T. Manzari 《国际地质力学数值与分析法杂志》2004,28(10):1011-1032

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

NaCl胁迫下杂交稻农艺性状配合力及遗传力分析     

方良俊 《广东海洋大学学报》2006,26(3):91-94

采用4×4不完全双列杂交设计,在NaCl胁迫下对杂交水稻主要农艺性状进行了配合力和遗传力分析.结果表明,在调查的10个性状中有4个性状受NaCl胁迫影响差异较大,母本的千粒重及父本的粒厚一般配力差异显著,杂交组合的株高、粒厚、结实率及千粒重特殊配合力差异极显著,其中杂交组合N28S×中花14具有较高的配合力,受NaCl胁迫影响较低。株高及千粒重的广义遗传力和狭义遗传力均较高,可作为杂交水稻耐盐性的选育依据。  相似文献   

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses     

M. J. Jiang  H. S. Yu  D. Harris 《国际地质力学数值与分析法杂志》2006,30(8):723-761

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

THERMAL EFFECTS OF BUILDING′S EXTERNAL SURFACES IN CITY——Characteristics of Heat Flux into and out of External Wall Surfaces     

ZHANG Yi-ping  HE Yun-ling    LIU Yu-hong  MA You-xin  LI You-rong  DOU Jun-xia     《中国地理科学(英文版)》2004,(4)

1INTRODUCTIONWiththerecentmodernizationandurbanizationofChi-na,urbanareashavegreatlyincreased, andgiantbuild-ings,especiallythosetallerthan100m,havebeendomi-nantincities,whichhave resultedinthegreatincreaseintheproportionofbuilding'sexternalsurfacetototalurbanarea.Thedifferencesofthermalpropertiesmain-lyinducedbysolarradiationbetweenbuilding'sexter-nalsurfacesareobviousfordifferentexposures,whichcaninevitablyinfluencethedistributionsofairtempera-turenearby,eventheverticaldistributionsofurb…  相似文献   

Investigating the mechanisms leading to the deglaciation of past continental northern hemisphere ice sheets with the CLIMBER–GREMLINS coupled model     

Sylvie Charbit  Masa Kageyama  Didier Roche  Catherine Ritz  Gilles Ramstein 《Global and Planetary Change》2005,48(4):1887

A coupling procedure between a climate model of intermediate complexity (CLIMBER-2.3) and a 3-dimensional thermo-mechanical ice-sheet model (GREMLINS) has been elaborated. The resulting coupled model describes the evolution of atmosphere, ocean, biosphere, cryosphere and their mutual interactions. It is used to perform several simulations of the Last Deglaciation period to identify the physical mechanisms at the origin of the deglaciation process. Our baseline experiment, forced by insolation and atmospheric CO₂, produces almost complete deglaciation of past northern hemisphere continental ice sheets, although ice remains over the Cordilleran region at the end of the simulation and also in Alaska and Eastern Siberia. Results clearly demonstrate that, in this study, the melting of the North American ice sheet is critically dependent on the deglaciation of Fennoscandia through processes involving switches of the thermohaline circulation from a glacial mode to a modern one and associated warming of the northern hemisphere. A set of sensitivity experiments has been carried out to test the relative importance of both forcing factors and internal processes in the deglaciation mechanism. It appears that the deglaciation is primarily driven by insolation. However, the atmospheric CO₂ modulates the timing of the melting of the Fennoscandian ice sheet, and results relative to Laurentide illustrate the existence of threshold CO₂ values, that can be translated in terms of critical temperature, below which the deglaciation is impeded. Finally, we show that the beginning of the deglaciation process of the Laurentide ice sheet may be influenced by the time at which the shift of the thermohaline circulation from one mode to the other occurs.  相似文献   

紫阳滑坡治理工程实例分析     

刘满全 《地球科学与环境学报》1994,(2)

本文介绍紫阳骨坡治理工程中有关抗滑桩的设计与施工。文中详细地论述了设计中设计人员应根据工程的具体情况去灵活处理的一些技术问题，如确定有关参数的选择原则，计算上的条件简化和一些具体技术细节的处理方法等．  相似文献