A critical zone observatory dedicated to suspended sediment transport: The meso-scale Galabre catchment (southern French Alps)     

Cédric Legout  Guilhem Freche  Romain Biron  Michel Esteves  Oldrich Navratil  Guillaume Nord  Magdalena Uber  Thomas Grangeon  Nico Hachgenei  Brice Boudevillain  Céline Voiron  Lorenzo Spadini 《水文研究》2021,35(3):e14084

The 20 km² Galabre catchment belongs to the French network of critical zone observatories (OZCAR; Gaillardet et al., Vadose Zone Journal, 2018, 17(1), 1–24). It is representative of the sedimentary lithology and meteorological forcing found in Mediterranean and mountainous areas. Due to the presence of highly erodible and sloping badlands on various lithologies, the site was instrumented in 2007 to understand the dynamics of suspended sediments (SS) in such areas. Two meteorological stations including measurements of air temperature, wind speed and direction, air moisture, rainfall intensity, raindrop size and velocity distribution were installed both in the upper and lower part of the catchment. At the catchment outlet, a gauging station records the water level, temperature and turbidity (10 min time-step). Stream water samples are collected automatically to estimate SS concentration-turbidity relationships, allowing quantification of SS fluxes with known uncertainty. The sediment samples are further characterized by measuring their particle size distributions and by applying a low-cost sediment fingerprinting approach using spectrocolorimetric tracers. Thus, the contributions of badlands located on different lithologies to total SS flux are quantified at a high temporal resolution, providing the opportunity to better analyse the links between meteorological forcing variability and watershed hydrosedimentary response. The set of measurements was extended to the dissolved phase in 2017. Both stream water electrical conductivity and major ion concentrations are measured each week and every 3 h during storm events. This extension of measurements to the dissolved phase will allow progress in understanding both the origin of the water during the events and the partitioning between particulate and dissolved fluxes of solutes in the critical zone. All data sets are available at https://doi.osug.fr/public/DRAIXBLEONE_GAL/index.html .  相似文献   

内蒙古碾子沟钼矿床成矿流体来源、演化及成矿机理     

孙丰月  王睿  王一存  李顺达  王可勇  石开拓  孙清飞  王文元 《吉林大学学报(地球科学版)》2020,50(3):768-780

内蒙古自治区碾子沟钼矿床地处华北地台北缘西拉木伦钼成矿带西段，为一典型的中型石英脉型钼矿床。该钼矿床矿脉（体）主要产于燕山早期二长花岗岩-钾长花岗岩内NNW、NW向断裂构造体系之中，成矿作用过程经历了黄铁矿±辉钼矿＋石英（Ⅰ）、辉钼矿＋黄铁矿±黄铜矿＋石英（Ⅱ）、黄铜矿＋黄铁矿±闪锌矿＋石英（Ⅲ）及石英±方解石（Ⅳ）4个阶段。系统的流体包裹体岩相学、包裹体组分析、包裹体显微测温研究表明，矿床初始成矿流体为高温、中低盐度（490~550℃，盐度（w（NaC1））2%~10%，50~62 MPa）均匀的NaCl-H₂O体系热液，δ¹⁸O_H2O-SMOW（2.21‰）及δD_H2O-SMOW（-68.9‰）表明其主要来源于岩浆热液；成矿流体上升并不断汇聚于容矿断裂空间，伴随温度、压力降低（380~460℃，26~40 MPa→360~420℃，25~30 MPa）而进入两相不混溶区，流体开始发生沸腾→强烈沸腾作用，导致成矿元素Mo大量沉淀富集成矿，成矿晚期残余流体与大气降水混合（δ¹⁸O_H2O-SMOW为-2.41‰~2.51‰，δD_H2O-SMOW为-110.1‰~-105.5‰），矿床属燕山早期中高温岩浆热液型钼矿床。  相似文献   

甘肃北山老金厂金矿床载金矿物特征、原位硫同位素组成及其对成矿的指示意义     

黄式庭  于晓飞  吕志成  刘家军  李永胜  杜泽忠  吕鑫  孙海瑞  杜轶伦 《吉林大学学报(地球科学版)》2020,50(5):1387-1403

老金厂金矿床是北山成矿南带最具代表性的中低温岩浆热液型金矿床之一，其规模为中型。依据脉体穿插、矿物共生组合和矿石结构构造等特征，将矿床矿化作用过程划分为石英-黄铁矿阶段（Ⅰ）、石英-含砷黄铁矿-毒砂阶段（Ⅱ）、石英-黄铁矿-多金属硫化物阶段（Ⅲ）和石英-方解石阶段（Ⅳ）。利用电子探针研究了不同成矿阶段载金矿物的元素组成及其分布规律。Ⅰ阶段：黄铁矿以粗粒自形立方体为主，粒度为0.50~1.50 mm，贫As、Au；毒砂含量极少，呈细粒他形。Ⅱ阶段：含砷黄铁矿周围常有大量毒砂产出，含砷黄铁矿多为立方体、五角十二面体，粒度为0.30~1.00 mm，富As、Au；该阶段矿化最为强烈，毒砂主要形成于此时期，多呈棱柱状、柱状、放射状集合体，显示富S亏As特征。Ⅲ阶段：多以黄铁矿-黄铜矿-闪锌矿共生组合脉的形式产出，黄铁矿多呈长条状，以富S、Cu、Zn、Au和贫Fe、As为特征。Ⅳ阶段：矿化作用极弱，毒砂、黄铁矿含量极少，为细粒他形。原位硫同位素组成显示：Ⅰ阶段黄铁矿δ³⁴S_V-CDT值为-3.8‰~-2.9‰，均值为-3.3‰；Ⅱ阶段黄铁矿和毒砂δ³⁴S_V-CDT值为-4.7‰~2.6‰，均值为-3.3‰；Ⅲ阶段黄铁矿和闪锌矿δ³⁴S_V-CDT值主要分布于-1.9‰~1.0‰之间，均值为0.1‰。此3个阶段硫同位素组成反映了成矿期硫主要来源于幔源岩浆，混入了部分地层硫。综合前人研究成果，认为成矿早期至晚期，成矿流体总体上由富S贫As向富As贫S演化。Ⅰ阶段体系处于中性稳定的环境，硫源充足；Ⅱ阶段为贫S富As的高氧逸度环境，由于大气降水对地层的淋滤渗透，混入富As流体，Au可能与As结合形成Au-As络合物，在成矿有利部位富集沉淀；Ⅲ阶段成矿元素种类丰富，体系为富S贫As的弱还原环境，Au很可能与HS^-、S^-形成络合物进入黄铁矿晶格。  相似文献   

凤太矿集区东塘子铅锌矿床S、Pb同位素组成对成矿物质来源的示踪     

张革利  田涛  王瑞廷  高卫宏  常宗东 《中国地质》2020,47(2):472-484

东塘子铅锌矿床是秦岭成矿带中典型的铅锌矿床之一,前人对东塘子铅锌矿床成矿作用研究较多,但受限于测试手段及认识的局限性,多年来对其物质来源的认识仍未统一。本文在充分研究东塘子铅锌矿床地质特征的基础上,开展了相关样品的S、Pb同位素分析,分析对象包括了不同类型的铅锌矿石,讨论了该铅锌矿床的成矿物质来源、区内岩浆岩与铅锌成矿的关系等。研究表明:东塘子铅锌矿床矿石硫化物δ34S值变化范围为1.8‰～12.5‰,平均7.50‰,计算获得成矿流体中总硫δ34S∑S为7.7‰,显示海水硫酸盐(蒸发膏岩)与岩浆硫的混合来源特征。矿石铅同位素组成稳定,铅源主要来自富U-Th-Pb的上地壳与深部,可能与深部岩浆活动有关。研究结果表明,东塘子铅锌矿床的成矿过程与南秦岭印支期大规模多阶段构造-岩浆-流体活动密切相关,为下一阶段区内找矿工作提供了新的思路。  相似文献   

四川米易海塔地区混合岩型铀矿流体包裹体特征     

郭锐  陈友良  刘凯鹏  郑玉文  胡漾 《矿物学报》2020,40(2):137-148

混合岩型铀矿是康滇地轴上最有希望取得找矿突破的铀矿类型,海塔地区的铀矿化即是该类型铀矿的典型代表。本文针对区内的长英质脉矿石、富晶质铀矿石英脉矿石和含矿热液石英脉中的石英流体包裹体进行了研究。结果表明,海塔地区混合岩型铀矿的成矿作用可分为2个阶段:早期混合岩化热液成矿阶段为高温、中低盐度流体,流体包裹体均一温度集中在380~540℃,盐度变化范围为16.15%~23.18%NaCl eqv,是区内铀成矿的主要阶段;晚期热液叠加改造成矿阶段为中低温、低盐度流体,流体包裹体均一温度集中在140~220℃,盐度变化范围为5.56%~23.18%NaCleqv,是区内富铀矿的形成阶段。流体包裹体的气相成分测试表明,长英质脉矿石石英包裹体中以CH4、CO2为主,其次为H2O和N2;而富晶质铀矿石英脉及含矿热液石英脉石英包裹体中以H2为主,部分含有CO2、CH4、H2O。氢、氧同位素研究表明,早期混合岩化成矿阶段的成矿流体可能为岩浆水与变质水的混合,而晚期热液叠加改造成矿阶段成矿流体中可能有大气降水的加入。  相似文献   

碳氮稳定同位素比值在潮间带大型底栖动物组织间差异性研究   总被引：1，自引：1，他引：0  

刘博  陈琳琳  李宝泉  侯西勇  冯光海  李晓炜  李秉钧  王玉珏 《海洋学报》2019,41(4):74-82

近年来，稳定同位素技术已被广泛应用于食物网研究中。然而，生物样品取样部位对食物网构建的影响的研究相对少见。大型底栖动物作为潮间带食物网的重要组成部分，在食物网研究中有必要对其采样部位进行统一，以增加研究结果的准确性及可比较性。本研究选取黄河三角洲和烟台潮间带10种代表性的大型底栖动物，比较δ13C和δ15N在不同采样部位中的差异。结果显示，对于大多数底栖动物而言，采样部位将直接影响到δ13C和δ15N的测定结果。当底栖动物作为摄食者，需分析其食性和营养级时，应统一采用肌肉组织，如贝类的闭壳肌或足部肌肉，蟹类的鳌足肌肉，鱼类的背部肌肉；当底栖动物作为被摄食者，需分析次级消费者的食性和营养级时，除多毛类采用去除消化道内容物的体壁外，其他种类应选取整体（难以被消化的组织除外），如贝类的软体部，蟹类肌肉与鳃等的混合组织。  相似文献   

滇东南南秧田钨矿床白钨矿原位Sr同位素对成矿的指示     

王忠强  李超  张定才  江小均  周利敏  严清高 《岩矿测试》2020,39(2):285-299

南秧田钨矿床位于滇东南老君山W-Sn矿集区,地处扬子地块和印支地块的结合部位,地质背景复杂并遭受了多期岩浆活动和区域变质事件,其成矿时代和成因一直存在争议。本文对矽卡岩型和长石-石英脉型白钨矿开展了年代学、原位微量元素、Sr同位素研究,分析了两类白钨矿年龄、成因以及物质来源的差异。结果表明,长石-石英脉内与白钨矿共生辉钼矿的Re-Os同位素等时线年龄为151.0±1.3Ma,明显晚于矽卡岩矿体年龄,属于后期成矿事件。矽卡岩型白钨矿的轻稀土富集、重稀土强烈亏损,Eu呈明显负异常(δEu=0.46),∑REE平均含量为65.60μg/g,Mo平均含量为240.16μg/g,Sr平均含量为883.43μg/g;长石-石英脉型白钨矿稀土呈Eu正异常(δEu=2.8)的平坦型,∑REE平均含量为194.40μg/g,Mo平均含量为16.01μg/g,Sr平均含量为129.26μg/g。以上两者微量、稀土元素含量的差别显示它们具有性质明显不同的流体来源,Eu异常指示矽卡岩型白钨矿形成于氧逸度较高的环境,长石-石英脉型白钨矿形成于还原性环境。矽卡岩白钨矿~(87)Sr/~(86)Sr值相对较低,并且比较均一,介于0.71319～0.71491之间,表明成矿流体主要来自岩浆热液;长石-石英脉型白钨矿~(87)Sr/~(86)Sr值较高且变化范围大,介于0.71537～0.72803之间,平均0.72079,呈现出变质流体特征。两种不同类型白钨矿Sr同位素都具有二元混合的特征,显示长石-石英脉型白钨矿对矽卡岩型白钨矿有叠加改造作用,成矿流体与围岩的强烈交代作用是白钨矿形成的关键。  相似文献   

Quantifying flow resistance in mountain streams using computational fluid dynamics modeling over structure-from-motion photogrammetry-derived microtopography     

Yunxiang Chen  Roman A. DiBiase  Nicholas McCarroll  Xiaofeng Liu 《地球表面变化过程与地形》2019,44(10):1973-1987

Flow resistance in mountain streams is important for assessing flooding hazard and quantifying sediment transport and bedrock incision in upland landscapes. In such settings, flow resistance is sensitive to grain-scale roughness, which has traditionally been characterized by particle size distributions derived from laborious point counts of streambed sediment. Developing a general framework for rapid quantification of resistance in mountain streams is still a challenge. Here we present a semi-automated workflow that combines millimeter- to centimeter-scale structure-from-motion (SfM) photogrammetry surveys of bed topography and computational fluid dynamics (CFD) simulations to better evaluate surface roughness and rapidly quantify flow resistance in mountain streams. The workflow was applied to three field sites of gravel, cobble, and boulder-bedded channels with a wide range of grain size, sorting, and shape. Large-eddy simulations with body-fitted meshes generated from SfM photogrammetry-derived surfaces were performed to quantify flow resistance. The analysis of bed microtopography using a second-order structure function identified three scaling regimes that corresponded to important roughness length scales and surface complexity contributing to flow resistance. The standard deviation σ_z of detrended streambed elevation normalized by water depth, as a proxy for the vertical roughness length scale, emerges as the primary control on flow resistance and is furthermore tied to the characteristic length scale of rough surface-generated vortices. Horizontal length scales and surface complexity are secondary controls on flow resistance. A new resistance predictor linking water depth and vertical roughness scale, i.e.  H/σ_z, is proposed based on the comparison between σ_z and the characteristic length scale of vortex shedding. In addition, representing streambeds using digital elevation models (DEM) is appropriate for well-sorted streambeds, but not for poorly sorted ones under shallow and medium flow depth conditions due to the missing local overhanging features captured by fully 3D meshes which modulate local pressure gradient and thus bulk flow separation and pressure distribution. An appraisal of the mesh resolution effect on flow resistance shows that the SfM photogrammetry data resolution and the optimal CFD mesh size should be about 1/7 to 1/14 of the standard deviation of bed elevation. © 2019 John Wiley & Sons, Ltd.  相似文献   

STUDY FOR ABNORMAL VARIATIONS OF UNDERGROUND FLUID IN LIJIANG AREA,YUNNAN PROVINCE BEFORE LUDIAN M_S6.5 EARTHQUAKE IN 2014     

YANG Zhu-zhuan  DENG Zhi-hui  YANG Yue-wen  DENG Sheng-chang  LI Qing 《地震地质》2018,40(2):480-498

The study is based on the underground fluid observation data in Lijiang area, northwest Yunnan Province. The data include the water level and temperature in Dangxiao well and Jinjia well, and the ion measurements in Ganze spring. Combining with the data of regional hydrogeology, rainfall, well structures, and the geothermal gradient, we analyzed the variations of each measurement item before the Ludian M_S6.5 earthquake on August 3, 2014 and discussed the possible mechanism for the abnormal variations. The water levels of both Dangxiao well and Jinjia well are influenced by local rainfall, but the former shows hysteresis according to rainy seasons and is the long trend influence; while the latter shows synchronization between high water level and rainy season, indicating good connection between well water and shallow aquifer. The recharge water for Dangxiao well is in relatively low temperature, and the temperature sensor is located at the major connecting section between the well water and the aquifer; the water temperature variation is mainly affected by the discharge status and variation of water level. The Jinjia well is always in static level, and the temperature sensor is below the major connecting section between the well water and aquifer, so the water temperature is affected little by water level variations and in smooth fluctuation. The recharge source for Ganze spring can generally increase the contents of calcium and magnesium ions, so does the conductivity. The water level data of Dangxiao well since 2012 are decomposed with wavelet technique. The results, excluding such high-frequency components as the noise and the semidiurnal and daily wave components influenced by earth tide, are further processed with difference method in order to eliminate the trend effect. The results show that the relative change of water level is enhanced and in relatively rapid increase before the Ludian M_S6.5 earthquake; the corresponding water temperature values are high. The tendency of water level in Jinjia well displays descending, while the corresponding water temperature shows ascending. The content of calcium ion, magnesium ion, bicarbonate ion, and conductivity of Ganze spring are descending, while the content of fluoride ion is ascending. The abnormal variations of underground fluid in Lijiang area appeared in turns and were accompanied with minor earthquakes before Ludian M_S6.5 earthquake, which indicates enhancing of regional stress and increasing of fluid activity.  相似文献   

南海IODP 349航次基底玄武岩中碳酸盐岩脉的岩石学特征*     

许佳锐  陈毅凤  王宝云 《热带海洋学报》2018,37(6):63-73

国际大洋发现计划(International Ocean Discovery Program, IODP)349航次在南海东部次海盆和西南次海盆残留扩张脊附近的U1431和U1433站位首次钻取基底玄武岩, 通过对16块基底玄武岩内的碳酸盐岩脉薄片镜下观察以及激光拉曼光谱分析, 揭示碳酸盐矿物为方解石和文石, 为典型的洋壳低温热液蚀变次生矿物。U1431站位碳酸盐岩脉为独立的方解石脉、文石脉交替出现; 而U1433站位则存在方解石脉、文石脉和方解石-文石共生脉三种情况。此外, U1431站位在基底~42.1m处出现了平行的方解石脉和文石脉, 揭示U1431存在不同来源热液的多期活动, 即可能存在多次或多阶段不同的热液注入。U1431和U1433站位的碳酸岩脉中, 文石的矿物集合体形状基本一致, 呈块状、纤维状和放射纤维状; 而方解石存在差异, U1431的方解石以斑块状、块状、粒状和纤维状出现, 而U1433的方解石仅出现块状。U1431站位的碳酸盐岩脉的丰度明显高于U1433站位。这些均揭示U1431站位的低温热液活动强, 而U1433站位则相对弱。两个站位的热液活动不同很可能是由于区域地质环境的差异造成——U1431附近的巨大海山为其提供了热液补给, 而U1433远离热液的补给/渗漏点。  相似文献