Explicit stress–strain equations for modeling frictional materials     

Kenneth J. Xu  Martin D. Liu  Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

载波/多普勒平滑伪距在Android手机中的定位实现     

张书维  高井祥  赵龙  李增科 《测绘通报》2020,(4):63-67

针对Android手机GNSS伪距定位精度较低的问题，利用手机端观测信息，通过载波相位/多普勒平滑伪距改善手机端伪距观测值的质量，从而达到提高定位精度的效果。首先给出了Android手机GNSS原始观测量的获取方法，然后推导了载波相位平滑伪距和多普勒平滑伪距算法模型，并设计合理有效的试验对算法的精度进行评定。试验结果表明：在手机端静态定位中载波相位和多普勒平滑算法均可提高原始伪距的定位精度，且多普勒平滑算法表现更优；在手机端动态定位中多普勒平滑算法可获得比原始伪距更优的定位精度，但是载波相位平滑算法较原始伪距更差；由于硬件的制约手机端周跳和信号失锁严重，占比超过50%，载波相位在手机端的可用性较低；多普勒平滑算法的最优平滑时间常数小于等于10 s，具有实时动态定位的巨大潜力。  相似文献   

中国古生教授学会微体古生物学分会举行代表大会和学术年会     

李家骧 《南方国土资源》1996,(4)

中国古生教授学会微体古生物学分会举行代表大会和学术年会中国古竽物学会微体古物学分会第五次会员代表大分暨第六次不术年会于１９９６年１月２４日到３０日在福州市召开。来自全国地质、石油、煤炭的和产、科研和大学的１００多位代表参加了这次大会和学术研讨。大会共...  相似文献   

Shearing flows of a dry granular material—hypoplastic constitutive theory and numerical simulations     

Chung Fang  Yongqi Wang  Kolumban Hutter 《国际地质力学数值与分析法杂志》2006,30(14):1409-1437

  相似文献   

青海省沙柳河南区有色金属矿成矿物质来源及矿床成矿模式探讨     

马永铨  姜洪成 《青海国土经略》1994,(1)

本文简述了沙柳河南区有色金属矿床的基本特征。通过对成矿热液及成矿物质的来源与性质的研究,认为该矿床的成因类型为火山沉积—接触交代改造叠加型,进而探讨了该矿床的成矿模式。  相似文献   

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste     

G. Diego Gatta  Nicola Rotiroti  Martin Fisch  Milen Kadiyski  Thomas Armbruster 《Physics and Chemistry of Minerals》2008,35(9):521-533

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.  相似文献   

Methodology for preliminary assessment of Natech risk in urban areas   总被引：1，自引：0，他引：1  

Ana Maria Cruz  Norio Okada 《Natural Hazards》2008,46(2):199-220

Concern for natural hazard-triggered technological disasters (Natech disasters) in densely populated and industrialized areas is growing. Residents living in urban areas subject to high natural hazard risk are often unaware of the potential for secondary disasters such as hazardous materials releases from neighboring industrial facilities, chemical storage warehouses or other establishments housing hazardous materials. Lessons from previous disasters, such as the Natech disaster during the Kocaeli earthquake in Turkey in 1999 call for the need to manage low frequency/high consequence events, particularly in today’s densely populated areas. However, there is little guidance available on how local governments and communities can assess Natech risk. To add to the problem, local governments often do not have the human or economic resources or expertise to carry out detailed risk assessments. In this article, we propose a methodology for preliminary assessment of Natech risk in urban areas. The proposed methodology is intended for use by local government officials in consultation with the public. The methodology considers possible interactions between the various systems in the urban environment: the physical infrastructure (e.g., industrial plants, lifeline systems, critical facilities), the community (e.g., population exposed), the natural environment (e.g., delicate ecosystems, river basins), and the risk and emergency management systems (e.g., structural and nonstructural measures). Factors related to vulnerability and hazard are analyzed and qualitative measures are recommended. Data from hazardous materials releases during the Kocaeli, Turkey earthquake of August 17, 1999 are used as a case study to demonstrate the applicability of the methodology. Limitations of the proposed methodology are discussed as well as future research needs.

Norio OkadaEmail:

  相似文献   

铁同位素的MC-ICP-MS测定方法与地质标准物质的铁同位素组成   总被引：22，自引：5，他引：17  

朱祥坤  李志红  赵新苗  唐索寒  何学贤  Nick S. Belshaw 《岩石矿物学杂志》2008,27(4):263-272

详细报道了在低分辨和高分辨模式下运用MC-ICP-MS进行Fe同位素比值高精度测试的方法,对Fe同位素测定过程中谱峰干扰、基质效应、浓度效应、仪器测试的长期重现性等问题进行了评估,并对两种运行模式的测试结果进行了对比.在95%的可信度范围内,所建方法的外部精度优于0.5ε/ainu,达到国际同类实验室的先进水平,并且低分辨和高分辨两种模式下获得的Fe同位素测试结果是一致的.在此基础上对国家地质标准物质GBW07105(玄武岩)和GBW 07111(花岗闪长岩)进行了Fe同位素测定.相对于Fe同位素国际标样IRMM-014,GBW07105的Fe同位素成分为:ε57Fe=1.9±0.3(20),ε56Fe=1.3±0.2(2σ),ε57/56Fe=0.6±0.1(2σ);GBW 07111的Fe同位素成分为:ε57Fe=1.8±0.4(2σ),ε56Fe=1.2±0.2(2σ),ε57/56Fe=0.6±0.1(2σ).  相似文献   

Mechanical Characteristics of Light-Weighted Soils Using Dredged Materials     

Gil-Lim Yoonz  Sang-Soo Jeon  Byung-Tak Kim 《Marine Georesources & Geotechnology》2004,22(4):215-229

This study investigates the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged clays, and cement through both unconfined and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analyzed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing pressure. In the triaxial compression test, it is found that the compressive strength of LWS associated with EPS is independent on the effective confining pressure. When both EPS ratio is less than 2% and cement ratio is more than 2%, the compressive strength rapidly decreases after the ultimate value. This signifies that the compressive strength-strain behavior is quite similar to that of the cemented soil. The ground improved by LWS has the compressive strength of 200 kPa associated with the optimized EPS ratio of 3-4% and initial water content of 165-175%. The ultimate compressive strength under both triaxial and unconfined compression tests is almost constant for a cement ratio of up to 2%.  相似文献