琼胶/SiO₂复合纤维的制备及性能研究     

吴大伟  颜廷波  李腾飞  王应霞  肖玉斌  薛志欣  夏延致 《海洋科学》2020,44(10):39-45

利用湿法纺丝技术制备了琼胶/SiO₂复合纤维，对琼胶分子在溶液中的分散性、纺丝液流变性、纤维的形貌、化学结构分别用DLS、旋转黏度计、SEM、FTIR和XRD进行了表征，并对纤维的力学性能、热性能和吸湿性能进行了测定。研究结果表明：琼胶分子在溶液中呈纳米尺度分布，纺丝液具有良好的流动性；琼胶/纳米SiO₂复合纤维具有良好的形态。随着纳米SiO₂的添加量逐渐提高，复合纤维的力学拉伸强度先增强后降低，复合纤维的吸水性降低，复合纤维的热稳定性逐渐增强。结合复合纤维综合性能，纳米SiO₂的最佳添加质量分数为0.5%。  相似文献   

A depth average SPH model including μ(I) rheology and crushing for rock avalanches     

Alberto Longo  Manuel Pastor  Lorenzo Sanavia  Diego Manzanal  Miguel Martin Stickle  Chuan Lin  Angel Yague  Saeid Moussavi Tayyebi 《国际地质力学数值与分析法杂志》2019,43(5):833-857

Classical depth-integrated smoothed particle hydrodynamics (SPH) models for avalanches are extended in the present work to include a μ(I)− rheological model enriched with a fragmentation law. With this improvement, the basal friction becomes grain distribution dependent. Rock avalanches, where grain distribution tends to change with time while propagating, are the appropriate type of landslide to apply the new numerical proposal. The μ(I)− rheological models considered in the present work are those of Hatano and Gray, combined with two different fragmentation laws, a hyperbolic and a fractal-based law. As an application, Frank avalanche, which took place in Canada in 1903, is analyzed under the scope of the present approach, focusing in the influence of the rheological and fragmentation laws in the evolution of the avalanche.  相似文献   

An experimental study of effect of pre‐existing fabric on deformation of foliated mylonite at high temperature and pressure     

Gui Liu  Yongsheng Zhou  Changrong He  Wenming Yao  Junlai Liu  Yuanyuan Zhang 《Geological Journal》2016,51(1):92-112

We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10⁻⁴, 1 × 10⁻⁵ and 2.5 × 10⁻⁶ s⁻¹. In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Rheological properties of the upper mantle of Northern Eurasia and nature of regional boundaries according to the data of long-range seismic profiles   总被引：1，自引：0，他引：1  

N.I. Pavlenkova 《Russian Geology and Geophysics》2011,52(9):1016-1027

Deep seismic investigation carried out in Russia in long-range profiles with peaceful nuclear explosions allowed clarifying in details the structure of the upper mantle and the transition zone down to the depth of 700 km within the huge territory of old and young platforms of Northern Eurasia. Variability of horizontal heterogeneity of the upper mantle depending on the depth serves to qualitative estimation of its rheological properties. The upper part of the mantle to the depth of 80–100 km is characterized by the block structure with significant velocity steps of seismic waves at the blocks often divided by deep faults. This is the most rigid part of lithosphere. Below 100 km horizontal heterogeneity is insignificant, i.e., at these depths the substance is more plastic and not capable to retain block structure. On the lithosphere bottom at the depth of 200–250 km plasticity increase is observed as well but the zone of the lower velocities that might have been bound with the area of partial melting (asthenosphere) has not been found. These three layers with different rheological properties are divided by seismic boundaries presented by thin layering zones with alternating higher and lower velocities. At the specified depths any phase boundaries have been distinguished. These thin layering zones are assumed to form due to higher concentration of deep fluids at some levels of depths where mechanical properties and permeability of substance change. Insignificant number of fluids may result in appearance of streaks with partial or film melting at relatively low temperature—to the rise of the weakened zones where subhorizontal shifts are possible. According to seismic data in many world regions seismic boundaries are also observed at the depth of about 100 and 200 km; they may be globally spread. There are signs that areas of xenoliths formation and earthquake concentration, i.e., zones of high deformations, are confined to these depths.  相似文献   

冻土区天然气水合物勘探低温钻井液理论与试验   总被引：3，自引：2，他引：1       下载免费PDF全文

杨葳  杨阳  徐会文 《探矿工程》2011,38(7):29-31,56

天然气水合物是在特定的低温与高压条件下形成的产物。在天然气水合物勘探工作中,低温钻井液是获得天然气水合物真实样品的重要保证条件之一。低温钻井液应具有低的冰点、良好的抵制能力与良好的流动性。结合天然气水合物勘探工作的特点,在试验的基础上,对比分析了PAM、PHPA、PAC-141、Na-CMC与KHm的分子结构、官能团的种类与数量对钻井液的防塌能力和流动性的影响,得出了几种处理剂的耐低温能力大小的顺序为：PAC-141〈PHPA〈PAM〈Na-CMC〈KHm,为天然气水合物勘探中低温钻井液的配制与使用,奠定了重要的基础。  相似文献   

耐230 ℃高温海水钻井液室内实验研究          下载免费PDF全文

邹志飞  熊正强  李晓东  付帆 《探矿工程》2022,49(1):49-56

为了解决深海油气井工程和大洋科学钻探深部高温井段钻井液流变稳定性和护壁性能等变差问题,以复合粘土为造浆材料,通过优选抗温抗盐降滤失剂、防塌剂和高温稳定剂等关键处理剂及钻井液配方优化研究,研发了一套耐230 ℃高温海水钻井液配方。采用高温高压流变仪、六速旋转粘度计和高温高压滤失仪等仪器,开展耐230 ℃高温海水钻井液的综合性能评价,如热稳定性、高温流变性等。实验结果显示,密度1.5 g/cm³的钻井液在230 ℃老化16 h前后,表观粘度变化率为2.5%,高温高压滤失量为23 mL。研究结果表明,该海水钻井液抗温可达230 ℃,具有良好的抗高温稳定性、高温流变性能以及较低的高温高压滤失量,可满足深海高温硬岩钻探要求。  相似文献   

A crack model of afterslip events on shallow faults     

Maria Elina Belardinelli  Maurizio Bonafede 《Geophysical Journal International》1991,106(3):521-530

  相似文献   

华北克拉通破坏与岩石圈减薄   总被引：20，自引：2，他引：18       下载免费PDF全文

嵇少丞  王茜  许志琴 《地质学报》2008,82(2):174-193

古太古代（约4.0 Ga）时地球上可能只有一个超级大陆, 它的岩石圈厚度高达400 km。在早元古代,这个超级大陆减薄、裂解成十几块,每块中心是太古宙岩石,边缘是元古宙岩石,且各块厚度不等（150~350km）。从元古宙之后这些被称之为稳定克拉通的大陆岩石圈就一直漂游在地幔软流圈之上。中国华北地块就是这些克拉通之一,与众不同的是它在中生代时遭受了第二次破坏,岩石圈厚度从古生代时的180~200 km 减少到现今的80~100 km。本文作者从流变学的视角出发,围绕华北克拉通破坏和岩石圈减薄这一核心问题,从  相似文献   

流变学:构造地质学和地球动力学的支柱学科   总被引：12，自引：6，他引：6  

嵇少丞  钟大赉  许志琴  夏斌 《大地构造与成矿学》2008,32(3)

地球是一动态系统,其各层圈的构造运动归根到底就是多矿物复合岩石在各种物理条件(例如,温度、围压、差应力、应变速率、应变方式等)下和化学环境(例如,氧逸度和水含量)中的形变。流变学作为研究岩石力学性质和变形行为的科学,现已成为地球动力学和构造地质学的支柱学科。本文对国际上近年来岩石流变学的最新进展做些扼要的介绍,呼吁中国固体地学界加强流变学的研究,做出经得起时间淘洗、实践检验的原创性成果来,使中国的构造地质学研究迈进国际先进的行列。  相似文献   

岩石圈中热压系数的计算   总被引：2，自引：0，他引：2  

刘绍文  王良书  贾承造  冯昌格 《地学前缘》2008,15(3):0-0

中国中西部地区发育众多前陆冲断带,它们具有构造变形复杂、油气潜力大和有别于经典前陆盆地的沉积和油气地质特征,但其成因过程和动力学并不清楚。文中利用中西部盆地区的地温、岩石热物性参数和地热学模拟技术,分析该区岩石圈热状态和流变学特征,进一步结合其他地质、地球物理资料,揭示盆地区的深部构造特征和岩石圈性质。研究表明,中西部各主要盆地的岩石圈具有厚度大、强度高、地温低等热-流变学特征,表现为刚硬块体;而其周缘和造山带区却表现为温度高、强度低和厚度小等特征,是构造变形的易发区。在此基础上讨论了岩石圈性质和变形过程等深部构造对前陆盆地成因演化的控制作用,进而初步归纳这类陆内再生前陆盆地的成因演化机制:发育于小型克拉通块体的边缘,其就位受控于岩石圈热-流变学非均质性和构造继承性,其动力来源是新生代印度-欧亚大陆碰撞及其持续的挤压作用。上述研究为探讨中国中西部地区的前陆盆地成因机制提供了深部资料和岩石圈热-流变学约束。  相似文献