2017-08-09新疆精河Ms6.6地震附近区域相对应变的变化分析     

高丽娟  邢喜民  高歌  李尚伟 《大地测量与地球动力学》2019,39(10):1002-1006

2017年精河M_S6.6地震震前，尼勒克、巴伦台和小泉沟台钻孔应变仪记录到显著的应变变化，经现场落实确认，异常是可靠的。根据这3个台的记录资料计算相对应变的变化，结果表明，地震前最大（小）主应变大小和方向分别出现明显加速和急剧偏转变化。此外还发现，相对应变场异常期间主方向与震源机制解P轴方位较为一致。  相似文献   

察尔汗盐湖西北部典型采区地下卤水赋存状态的地面核磁探测与数值模拟研究          下载免费PDF全文

张光武  易磊  高泽永  韩凤清  陈富洪  马喆  卢晓航  刘小宝  韩光  袁文虎  刘溪溪 《盐湖研究》2020,28(1)

察尔汗盐湖地下晶间卤水蕴藏了宝贵的盐湖矿产资源,如何确定地下卤水的赋存规律以制定科学合理的卤水开采和补给方案,正成为盐湖资源大规模可持续利用亟需解决的重要问题。本文以察尔汗盐湖西北部的典型采卤区作为研究区域,1)利用新型的地面核磁共振找水仪,通过在研究区布设两条十字交叉的测线,探测并反演解译测区地下60米深度内的卤水静态赋存形式,2)结合OpenGeoSys(OGS)多物理场耦合地下水数值模拟软件,对测区地下卤水的动态运移形式进行数值模拟计算。地面核磁探测结果表明研究区含水量整体偏低,最大含水量约0.8%,平均含水量约0.4%。测点结果给出的含水层位分界面与邻近钻孔的地层层位分界面的一致性较高,浅部的层位误差在10%以下,达到了0.5米的精度。考虑到测区南北两边均有采卤渠正在汲取地下卤水,且在测区中心存在两条废弃的采卤渠,OGS地下水数值模拟研究结果表明采卤渠造成测区浅部卤水较大空缺,与研究区浅部含水量总体偏低的探测特征一致。研究结果表明地面核磁共振技术能准确探测卤水当前的赋存状态,地下水运移模拟技术可以深入认识采补活动引起卤水赋存状态的变化规律。探测和模拟结合的联合研究是确定卤水赋存规律的重要手段,研究成果可为盐湖资源合理开采高效利用提供基础资料和相关科学支撑。  相似文献   

地下洞库勘察中的深斜孔钻探和压水试验技术          下载免费PDF全文

吉孟瑞  孙桂明  吴昌庆  原华山 《山东国土资源》2001,17(2):56-60

青岛市黄岛区拟建设海底地下油气储藏库,前期地质勘察工作要求施工倾角45°、深220m的取心钻孔4个,并在孔内分段进行压水试验.本文介绍了如何利用XY-4型金刚石小口径钻机施工基岩深斜孔及压水试验技术.  相似文献   

Neutron background in large-scale xenon detectors for dark matter searches     

M. J. Carson  J. C. Davies  E. Daw  R. J. Hollingworth  V. A. Kudryavtsev  T. B. Lawson  P. K. Lightfoot  J. E. McMillan  B. Morgan  S. M. Paling  M. Robinson  N. J. C. Spooner  D. R. Tovey 《Astroparticle Physics》2004,21(6):667-687

Simulations of the neutron background for future large-scale particle dark matter detectors are presented. Neutrons were generated in rock and detector elements via spontaneous fission and (α,n) reactions, and by cosmic-ray muons. The simulation techniques and results are discussed in the context of the expected sensitivity of a generic liquid xenon dark matter detector. Methods of neutron background suppression are investigated. A sensitivity of 10⁻⁹–10⁻¹⁰ pb to WIMP-nucleon interactions can be achieved by a tonne-scale detector.  相似文献   

Prediction of lateral variability in fracture intensity using multicomponent shear-wave surface seismic as a precursor to horizontal drilling in the Austin Chalk   总被引：1，自引：0，他引：1  

Michael C. Mueller 《Geophysical Journal International》1991,107(3):409-415

  相似文献   

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion     

Chengqing Wu  Yong Lu  Hong Hao 《国际地质力学数值与分析法杂志》2004,28(1):93-109

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Optimization of grid-drilling using computer simulation     

J. William Miller Jr. 《Mathematical Geology》1991,23(2):201-218

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.  相似文献   

JD直连式深孔绳索取心钻杆的研制与应用          下载免费PDF全文

许华松  覃强华  熊海书 《探矿工程》2008,35(10):33-35

根据深部找矿的需要,立足于我国目前钻探设备现状和材料冶炼及机械加工水平,通过对钻杆选材、结构、制造工艺的创新,研制了一种两端镦粗后整体热处理再车螺纹的新型深孔绳索取心钻杆及配套钻具,经使用,效果达到了设计要求。  相似文献   

旋流除砂机理研究及自动旋流除砂器的开发          下载免费PDF全文

张学强  鄢泰宁 《探矿工程》2008,35(11):34-36

旋流除砂技术是利用离心力从泥浆中分离固相成分的技术,可广泛应用在地质钻探、有色、冶金工业及石油天然气工业领域。研制开发的自动旋流除砂器弥补了传统除砂器固相成分分离效果不佳、排砂口易堵的缺陷,显著提高泥浆或矿浆的净化质量与除砂效率,且能自动排堵,降低了除砂工作的时间消耗和成本。  相似文献   

水平定向钻进非开挖铺管技术市场分析     

袁明昕 《探矿工程》2008,35(10):49-51

重点分析了近几年我国水平定向钻进铺管钻机和施工市场的发展趋势,结合国外的水平定向钻进市场发展分析,总结了我国水平定向钻进技术与市场的发展态势。  相似文献