Analysis of Main Controlling Factors of Overburden Failure in Coal Mining Under Thick Coal Seam Geological Conditions     

Pang  Lifu  Liu  Weitao  Qin  Yueyun 《Geotechnical and Geological Engineering》2021,39(2):883-896

According to the theory of elastic mechanics half plane, the mechanical model of roof overburden failure is established. Based on the numerical simulation software FLAC^3D, the failure process of roof overburden in 1308 working face is numerically simulated according to the orthogonal experimental design scheme. Matrix analysis and variance analysis are used to analyze and calculate the simulation results to determine the sensitivity of the main control factors to the failure height of overlying rock of mining roof. The results show that: (1) with the increase of mining depth and the advancing distance of working face, the subsidence of roof overburden increases. (2) The order of influence of main controlling factors on roof overburden failure height is: mining depth > working face length > internal friction angle > mining thickness > coal seam dip angle > cohesion > tensile strength. (3) Variance analysis showed that the mining depth height was significant, the working face length and internal friction angle were significant, and the significance of working face length was slightly greater than that of internal friction angle, and other factors were not significant.

  相似文献   

Effects of installation on the cyclic axial behaviour of suction buckets in sandy soils     

《Applied Ocean Research》2019

Suction buckets differ with their easy and cost-efficient installation technique from other foundation types for offshore wind turbines. For successful completion of their installation process, suction is essential, but the imposed seepage leads to the changes in states of the soil in and around the bucket. Especially, a loosening of soil inside the bucket affects the load carrying behaviour of bucket subjected to repetitive loading resulting from environmental conditions. In this study, the behaviour of buckets under cyclic axial compressive loads with considering a possible loosening and related changes in permeability of soil inside the bucket is investigated numerically. In the framework of finite element analysis, a fully coupled two-phase model and a hypoplastic constitutive model are used to describe the saturated sandy soil behaviour under repetitive loading. The porosity-permeability variation is taken into account by Kozeny–Carman relationship. Special attention is dedicated to load carrying behaviour of bucket top plate, inner and outer skirt as well as base and their changes resulting from a loosening of soil inside the bucket with variable aspect ratio. For this purpose, cyclic axial compressive loads which cause an attenuation and progressive failure of soil-bucket system response are considered. The main findings on the changes in load carrying behaviour of bucket are presented and discussed.  相似文献   

利用GLAS激光测高数据评估DSM产品质量及精度优化   总被引：2，自引：0，他引：2  

胡柳茹  唐新明  李国元  付冬暇  窦显辉  赵世湖 《测绘通报》2019,(11):39-43

提出了一种利用卫星激光测高数据直接优化提升数字表面模型（DSM）产品精度的方法。选取境外中亚地区的资源三号DSM开展试验，通过采用多准则约束方法提取激光高程控制点，分别利用偏度、中值、线性、二次多项式等进行DSM误差修正，发现4种模型均能有效消除DSM系统误差，其中基于二次多项式的方法更适用于平地和丘陵地貌，线性模型更适用于高山地貌。试验验证了采用卫星激光测高数据优化境外DSM技术流程的可行性，最终可提高DSM的绝对高程精度。  相似文献   

顾及外拓扑的产权体构建及其3-组合图表达          下载免费PDF全文

史云飞  李德强  张玲玲  蔡振锋  张丕亚 《武汉大学学报(信息科学版)》2019,44(4):617-624

为构建和表达顾及外拓扑的产权体，以现有楼层平面图为基础，采用"推拉"二维图形的方式生成产权体三维模型，并使用3-组合图表达产权体的内拓扑与外拓扑，提出基于带权关联图与关联矩阵的"推拉"间隔传递方法，基于老新间隔对照关系的组合图飞镖生成方法以及组合图β关系的添加算法。通过"推拉"平面图的方式可以生成产权体三维模型；3-组合图可以表达产权体的内拓扑和外拓扑，并能提高构体效率。  相似文献   

高分五号全谱段光谱成像仪地表温度与发射率反演     

杨以坤  历华  孙林  杜永明  曹彪  柳钦火  朱金山 《遥感学报》2019,23(6):1132-1146

地表温度在全球能量平衡和气候变化研究中具有重要意义。中国新一代高分辨率卫星高分五号卫星(GF-5)搭载的全谱段成像光谱仪有4个40 m空间分辨率的热红外波段,可以提供高空间分辨率的地表温度信息。本文提出了适用于全谱段成像光谱仪的温度与发射率分离TES(Temperature and Emissivity Separation)算法同时反演地表温度和发射率,为了提高大气校正精度,算法加入了水汽缩放WVS(Water Vapor Scaling)大气校正方法。首先利用Seebor V5.0全球大气廓线库构建模拟数据对算法精度进行了评价;然后利用张掖地区11景ASTER影像作为替代数据和同步的地面实测数据对算法精度进行了验证。模拟数据结果表明加入WVS方法后TES算法反演地表温度的RMSE由2.59 K降低到1.54 K,4个波段地表发射率的RMSE分别从0.122、0.12、0.102和0.037降低到0.042、0.04、0.028和0.026;地表验证结果表明本文算法反演的地表温度与站点实测值具有更好的一致性,平均Bias由1.08 K降低到0.47 K,RMSE由2.17 K降低到1.7 K;反演的各波段地表发射率与地面实测结果误差均小于1%。因此,本文提出的温度与发射率分离算法具有较高精度,可以利用GF-5数据获取高精度高空间分辨率的地表温度和发射率数据,服务于其他相关研究。  相似文献   

北斗三号系统标准单点定位精度分析          下载免费PDF全文

李国梁  钱雨阳 《全球定位系统》2019,44(4):113-118

根据我国北斗卫星导航系统（BDS）建设情况以及发展战略,目前我国北斗导航系统已经进入第三阶段的建设．本文以IGS连续跟踪站的数据为基础,首先对北斗三号(BDS-3)星信号数据质量进行分析,然后对BDS-3准单点定位精度进行分析,并与北斗二号(BDS-2)标准单点定位精度进行对比,结果表明,在观测区域内,BDS-3的数据质量较好,单系统定位精度优于BDS-2的定位精度．   相似文献   

基于虚拟观测值的伪距差分方法研究          下载免费PDF全文

赵亚枝  谷守周  秘金钟  刘一  陈冲 《全球定位系统》2019,44(5):35-40

针对当前伪距差分服务观测值双差模式基准站坐标涉密不能在线传输与伪距改正数模式标准格式无法兼容北斗卫星导航系统（BDS）的问题,本文基于局域连续运行参考站（CORS）网数据,生成虚拟格网综合伪距改正数,并进一步生成虚拟伪距观测值,向用户实时播发虚拟观测值与站点坐标,用于用户差分定位．实验证明,虚拟格网伪距观测值差分可为用户提供平面亚米级、垂直优于1.5 m的定位服务．对实验数据进行分析,给出了格网差分最优配置方案．本文方法在解决上述两个问题的基础上由于服务端计算压力恒定,不受用户数限制,从算法上解决了大量用户并发接入服务的问题．   相似文献   

Highly fractionated Late Triassic I-type granites and related molybdenum mineralization in the Qinling orogenic belt: Geochemical and U–Pb–Hf and Re–Os isotope constraints     

《Ore Geology Reviews》2014

We present new data on the highly fractionated Late Triassic I-type Liyuantang granite, which is located in the middle segment of the South Qinling Subzone of central China and is associated with molybdenum mineralization. Zircon U–Pb dating indicates that the granite was emplaced at 210.1 ± 1.9 Ma, with a single zircon containing an inherited core that yielded an age of 449.8 ± 7.1 Ma. Magmatic zircons from the granite have ε_Hf(t) values of − 4.0 to + 1.5, whereas the inherited zircon core has a ε_Hf(t) value of − 5.3. Calculated Hf model ages of crust formation are indicative of substantial contributions from melting of Proterozoic crust that ranges in age from 1501 to 1155 Ma. The granite contains high concentrations of Si, Al, Na, and K, is enriched in Rb, Th, and U, has elevated Rb/Sr and Ga/Al ratios, and is depleted in Ti, Fe, Mn, Mg, Ca, and P, with significantly negative Eu anomalies (δEu = 0.33–0.50), similar to other highly fractionated I-type granites. These data indicate that the magmas that formed the Liyuantang pluton were produced during partial melting of Proterozoic garnet-absent quartz amphibolites. The magmas then fractionated apatite, feldspar, Ti-bearing phases, biotite, and hornblende prior to emplacement.Re–Os isotope analysis of molybdenite from the study area yields a mineralization age of 200.9 ± 6.2 Ma, suggesting that the Liyuantang molybdenum deposit formed during a previously unrecognized mineralization event. The present results, together with previous data, demonstrate that highly fractionated I-type granites associated with the second pulse of magmatism in the South Qinling subzone should be considered highly prospective for mineral exploration, focusing on Triassic–Early Jurassic granitoids.  相似文献   

New mantises (Insecta: Mantodea) in Cretaceous ambers from Lebanon,Spain, and Myanmar     

《Cretaceous Research》2016

Diverse new material of mantises found in the Cretaceous amber-bearing deposits from Lebanon (Barremian), Spain (Albian), and Myanmar (Albian–Cenomanian) are described and figured. The Lebanese and Spanish forms are nymphs; while the one from Myanmar is an adult specimen. The Lebanese nymph corresponds to a new specimen of Burmantis lebanensis Grimaldi, 2003 while the adult Burmese (Myanmar) specimen belongs to the new species Burmantis zherikhini. The Spanish specimen represents a new genus and species and is established as Aragonimantis aenigma, but is considered family incertae sedis. The Spanish specimen is the first record of Mesozoic mantises from western-European amber deposits. A revised phylogenetic hypothesis for Cretaceous mantises is proposed.  相似文献   

非匀一冠层热辐射方向性3维模型构建——以玉米冠层为例     

马红章  刘素美  孙根云  杜永明  孙林  柳钦火 《遥感学报》2016,20(3):374-381

建立适用于多类型植被场景的热辐射方向性模型是进行地表热辐射方向性研究的一种手段。利用真实植株几何及生理参数的统计平均值来刻画理念植株,并给定其空间分布特征,进行不同生长期植被冠层的描述。基于冠层双向孔隙率思想构建了冠层热辐射方向性3维模型,模型继承了孔隙率模型在计算冠层热辐射方向性上的简洁优势同时以几何光学的思想考虑了冠层空间异质性对冠层热辐射方向性的影响。以玉米冠层为例,进行了不同生长期玉米冠层热辐射方向亮温的模拟,通过与实地测量数据的比对表明,本文发展的模型能够较准确地模拟不同生长期玉米植被场景的方向亮温变化规律,模拟误差主要来自理念株的刻画误差、玉米叶片形状的近似以及忽略了多次散射贡献等3个方面。模型的构建方法对稀疏植被场景、浓密植被场景、多类型植被的混合场景均可适用,不同观测几何下的植被场景4组份面积比计算结果有望应用于复杂地表条件下地表返照率的研究。  相似文献