Three-dimensional active earth pressure from cohesive backfills with tensile strength cutoff     

Zheng-Wei Li  Tian-Zheng Li  Xiao-Li Yang 《国际地质力学数值与分析法杂志》2020,44(7):942-961

Most of previous analyses on the active earth pressure were performed in two-dimensional cases using the Mohr-Coulomb (M-C) failure function to describe the soil strength. However, all failures of retained slopes indicate a somewhat three-dimensional (3D) feature, and the M-C function is found to overestimate the tensile strength of cohesive soil. In this work, a kinematic limit analysis–based approach is developed for computing the 3D active earth pressure resulting from cohesive backfills. The concept of tensile strength cutoff is adopted to implement the reduction or elimination of tensile strength from the strength envelope. An extended 3D horn failure mechanism that is associated with the modified strength envelope is developed to characterize the collapse of retained slopes. The resultant of active earth pressure is evaluated from the work rate balance equation and expressed as an unfactored coefficient. The obtained results indicate that less support provided by the wall is required when allowing the existence of soil cohesion and 3D effects and that eliminating the tensile strength can observably increase the active earth pressure, especially for the backfill with a great level of cohesion.  相似文献   

Integrated UAS and LiDAR reveals the importance of land cover and flood magnitude on the formation of incipient chute holes and chute cutoff development     

Quinn W. Lewis  Douglas A. Edmonds  Brian J. Yanites 《地球表面变化过程与地形》2020,45(6):1441-1455

Meandering river sinuosity increases until the channel erodes into itself (neck cutoff) or forms a new channel over the floodplain (chute cutoff) and sinuosity is reduced. Unlike neck cutoff, which can be measured or modelled without considering overbank processes, chute cutoff must be at least partially controlled by channel-forming processes on the floodplain. Even though chute cutoff controls meandering river form, the processes that cause chute cutoff are not well understood. This study analyses the morphology of two incipient chute cutoffs along the East Fork White River, Indiana, USA, using high temporal and spatial resolution UAS-based LiDAR and aerial photography. LiDAR and aerial imagery obtained between 1998 and 2019 reveals that large scour holes formed in the centre of both chutes sometime after chute channel initiation. A larger analysis within the study watershed reveals that scour holes within incipient chutes can be stable or unstable, and tend to stabilize when the chute is colonized by native vegetation and forest. When the scour holes form in farmed floodplain, they enlarge rapidly after initial formation and contribute to complete chute cutoff. In addition, this study shows that the formation of scour holes can occur in response to common, relatively low-magnitude floods and that the amount of incipient chute erosion does not depend on peak flood magnitude. The role of scour holes in enlarging chute channels could be an important mechanism for chute channel evolution in meandering rivers. This study also confirms that understanding the relationships among flow, land cover, and cutoff morphology is substantially improved with on-demand remote sensing techniques like integrated UAS and LiDAR. © 2020 John Wiley & Sons, Ltd.  相似文献   

Analysis of Anomalous Characteristics of Regional Crustal Deformation before the September 16th, 2019 Zhangye MS5.0 Earthquake, Gansu, China     

MA Haiping  WANG Qian  ZHANG Bo  WU Shanyi  WANG Pengtao  DOU Xiying  LI Minjuan 《中国地震研究》2020,34(2):210-218

To study the crustal movement in the vicinity of the epicenter before the Zhangye M_S5.0 earthquake in 2019, the characteristics of crustal deformation before the earthquake are discussed through the GPS velocity field analysis based on the CMONOC data observed from GPS. The baseline time series between two continuous GPS stations and the strain time series of an area among several stations are analyzed in the epicenter area. The resulting time series of baseline azimuth around the epicenter reflects that the energy of the fault in the northern margin of Qilian Mountain is accumulated continuously before 2017. Besides, the movement trend of azimuth slows down after 2017, indicating the stress accumulation on both sides of the seismogenic fault zone has reached a certain degree. The first shear strain and EW-direction linear strain in the epicentral area of the Zhangye M_S5.0 earthquake remain steady after 2017, and the surface strain rate decreases gradually after 2016. It is illustrated that there is an obvious deformation loss at the epicentral region three years before the earthquake, indicating that a certain degree of strain energy is accumulated in this area before the earthquake.  相似文献   

Precise Determination of Astronomical Azimuth by the Hour Angle Method of Multiple Meridian Stars     

《Chinese Astronomy and Astrophysics》2020,44(4):536-548

  相似文献   

基于经验模态分解和小波分解估算海气通量涡相关计算中的截断时间尺度     

姜浩  赵中阔  樊伟  宋金宝 《海洋与湖沼》2018,49(6):1138-1150

基于时长38天的海表风场实测数据,应用经验模态分解(EmpiricalModeDecomposition,EMD)和小波分解(Wavelet Decomposition, WD)这两种数据处理方法首先对涡相关法中的截断时间尺度(CutoffTimescale,CTS)进行估算,结果显示:基于EMD与WD方法估算出的CTS一般都在40秒左右(EMD的结果略小),远远小于传统涡相关法中CTS的取值(固定为10分钟),且EMD和WD的使用使得每一段数据都能够根据自身的湍流特点而获得合适的CTS; EMD方法和WD方法有效的去除了计算结果中的非湍部分,且对通量传输方向的刻画也更加合理,极大提高了通量的计算精度,所得通量与传统方法计算的通量偏差平均值高达45%;研究还对EMD和WD的优缺点进行了对比分析,结果表明EMD相比于WD有更高的自主性,而WD对信号的分离程度则更高。  相似文献   

旋翼无人机测算风速风向技术研究   总被引：1，自引：1，他引：0  

何诚  吕振义  李瑾  王越  舒立福 《测绘通报》2019,(12):91-95

目前大部分民用无人机没有准确测量风速、风向和预警风场的功能，然而森林火灾扑救等多种场景需要无人机可以提供准确的风速。本文提出了一种基于旋翼无人机坐标数据测算风速风向的技术，通过无人机主机RTK坐标信息及方位角、倾角数据精准获取螺旋桨点相对坐标信息，选择不同负载条件下无人机以1~16 m/s的不同速度分别飞行30 s以上，根据螺旋桨坐标信息变化数值，结合风洞测试数据及风场动力学原理，研究风速与旋翼无人机倾角关系，并通过风洞试验检验该方法精度；并可根据无人机RTK推算出的螺旋桨坐标变化信息判断风向。结果表明，无人机风速与旋翼无人机倾角呈正相关关系；无人机负载加重时，对应受风速干扰的倾角会相对减小；无人机飞行受阵风干扰出现噪点的概率，高海拔区域大于低海拔区域；并建立六旋翼无人机飞行倾角的风速估算模型y=－1.043 5+1.150 1x，该模型测算风速的中误差值为0.966，绝对值小于1，满足应急指挥现场对无人机测量风速精度要求。该方法得到风速测算精度高，可以为旋翼无人机实时获取风速风向提供一种可行方法，具有一定的实用价值。  相似文献   

考虑方位漂移的水平井井眼轨道设计   总被引：1，自引：1，他引：0       下载免费PDF全文

王世栋  张志刚  耿雪樵  于彦江  陈奇 《探矿工程》2018,45(7):14-18

目前,深层页岩气水平井在钻井过程中经常出现方位漂移的问题,方位漂移严重影响了水平井的井眼轨迹控制,进而影响水平井的准确中靶。在现场施工中,通常根据施工区以前的钻井经验,在进行定向造斜时,先估计出一个“方位超前角”,这种现场的做法有着很大的不确定性,并且可能出现较大误差。本文提出了考虑方位漂移的水平井井眼轨道优化设计的方法,解决了仅凭现场经验给出的“超前角”不准确的问题。考虑方位漂移的水平井井眼轨道优化设计按照井段划分,将地层因素与井身剖面结合起来求取井段的平均方位漂移率。根据该方法研制开发了考虑方位漂移的水平井井眼轨道优化设计软件,并通过举例进行了验证,证明了方法是可行的。  相似文献   

大跨径高桥墩垂直度观测方法和精度分析     

许娅娅  王月莉 《测绘工程》2006,15(1):38-40

介绍了高桥墩的垂直度观测方法和精度分析,推导出一系列实用公式,观测方法简单,结果精确可靠。利用这种方法能快速有效地判断出桥墩的倾斜量,及时采取相应调整措施,以保证桥墩的垂直性。  相似文献   

矿用随钻动态方位伽马仪器的研制与应用     

陈龙  陈刚  张冀冠 《煤田地质与勘探》2022,50(1):86-91

顺煤层瓦斯抽采钻孔是目前最直接最有效的瓦斯治理方法,自然伽马作为含煤地层识别常用的判识依据,可以根据地层放射性判断钻孔轨迹是否在目标层中。但现有的矿用伽马测井仪器只能进行滑动钻进测量,不适用于复合钻进及旋转导向钻进,无法满足伽马动态连续测量的工况。针对以上问题,在分析了煤矿井下随钻测量工况特点和伽马测井原理的基础上,通过低压直流载波双向通信技术进行孔底多扇区方位伽马数据的实时传输;采用屏蔽开窗的结构设计,实现单伽马晶体的8扇区分区测量;基于三轴MEMS加速度传感器和三轴MEMS陀螺仪不同的频率特性,采用互补滤波的动态测量方法,克服了回转钻进过程中振动和旋转对工具面向角测量的影响。通过地面性能测试和井下的工业性试验,验证了仪器在不同放射性地层分界面能正确反映出地层放射性变化规律。试验结果表明,仪器可以满足复合回转定向钻进时的地质导向测量要求,为煤矿井下顺煤层定向钻进提供了技术保障。   相似文献   

小尺度断裂沿层曲率敏感性研究     

胡建波 《地质与勘探》2023,59(4):891-900

沿层曲率作为地震属性的一种,不仅有数学几何意义更有着重要的地质意义。和相干体相比,沿层曲率在油气勘探中常被用于刻画地质构造形态及断裂精细解释,特别是在小尺度断裂发育的地区更为有效。而在实际工作中,有时利用沿层曲率所描述的断裂效果不太明显。为进一步明确对于刻画断裂结果的影响因素及其适用条件,以鄂尔多斯盆地Q区Tj9为研究对象,基于Geoeast软件对该区小尺度断裂系统从选取属性、方位角、频带三个方面展开分析。结果表明：（1）曲率比相干体更适用于刻画较小尺度的断层;（2）平面上从平行断裂的方位观测,断裂识别不清晰;从垂直断裂的方位观测,易于识别;（3）在反射层同相轴较强时,中高频段对断裂识别更清楚;在反射层同相轴较弱时,中频段对断裂识别更清楚。因此可以根据不同属性、不同方位角、不同频带对断裂的敏感程度,用不同的数据体解释小尺度断裂,提高对断层刻画的精度,为复杂油气勘探寻找有利区奠定基础。  相似文献