喜马拉雅山脉中段土地覆被的垂直分异特征     

张镱锂  吴雪  郑度 《地理学报》2020,75(5):931-948

喜马拉雅山脉中段的珠穆朗玛峰等地,海拔高差巨大、生境复杂多变、土地覆被类型多样且植被垂直带谱完整,是全球范围内研究土地覆被垂直变化的理想场所。本文基于30 m空间分辨率的土地覆被数据（2010年）和DEM数据,在ArcGIS和Matlab平台的支持下,提出并运用脊线法、样带法和扇区法3种山地南北坡划分方法,研究了喜马拉雅山土地覆被垂直分布与结构差异。结果表明：① 山地土地覆被分布具有明确的垂直地带性结构特征,喜马拉雅中部土地覆被垂直带谱为南六北四式,土地覆被垂直带谱中具有人类活动的特点。② 南北坡之间的土地覆被垂直带谱差异明显,南坡土地覆被类型完整多样,北坡相对简单;对同类型土地覆被而言,南坡较北坡分布高程低、幅度宽。③ 依据各类型分布面积比随海拔变化情况,土地覆被类型在南北坡上的垂直分布可分为4种模式：冰川雪被、稀疏植被和草地为单峰分布型,裸地为南单峰北双峰分布型。④ 3种划分方法中,南坡的土地覆被垂直带结构具有相似性,而北坡的土地覆被垂直带结构存在差异,扇区法较好地反映了土地覆被自然分布格局。  相似文献   

Variations in glacier volume and snow cover and their impact on lake storage in the Paiku Co Basin,in the Central Himalayas     

Xingxing Zhang  Rui Wang  Zhijun Yao  Zhaofei Liu 《水文研究》2020,34(8):1920-1933

Glaciers and snow cover are important constituents of the surface of the Tibetan Plateau. The responses of these phenomena to global environmental changes are sensitive, rapid and intensive due to the high altitudes and arid cold climate of the Tibetan Plateau. Based on multisource remote sensing data, including Landsat images, MOD10A2 snow product, ICESat, Cryosat-2 altimetry data and long-term ground climate observations, we analysed the dynamic changes of glaciers, snow melting and lake in the Paiku Co basin using extraction methods for glaciers and lake, the degree-day model and the ice and lake volume method. The interaction among the climate, ice-snow and the hydrological elements in Paiku Co is revealed. From 2000 to 2018, the basin tended to be drier, and rainfall decreased at a rate of −3.07 mm/a. The seasonal temperature difference in the basin increased, the maximum temperature increased at a rate of 0.02°C/a and the minimum temperature decreased at a rate of −0.06°C/a, which accelerated the melting from glaciers and snow at rates of 0.55 × 10⁷ m³/a and 0.29 × 10⁷ m³/a, respectively. The rate of contribution to the lake from rainfall, snow and glacier melted water was 55.6, 27.7 and 16.7%, respectively. In the past 18 years, the warmer and drier climate has caused the lake to shrink. The water level of the lake continued to decline at a rate of −0.02 m/a, and the lake water volume decreased by 4.85 × 10⁸ m³ at a rate of −0.27 × 10⁸ m³/a from 2000 to 2018. This evaluation is important for understanding how the snow and ice melting in the central Himalayas affect the regional water cycle.  相似文献   

栉孔扇贝foxl2基因在卵子发生中的必要性     

刘晓玲  刘军  王振东  王振华  李彦伸  崔龙波 《海洋科学》2018,42(4):127-131

采用RNAi技术研究了栉孔扇贝(Chlamysfarreri)foxl2基因在卵子发生和卵巢功能维持中的作用。使用体外合成的栉孔扇贝foxl2双链RNA(dsRNA),以每只50μg/次的剂量注射进闭壳肌中,连续注射2次(第一次注射后7天,再进行第二次注射);以注射相同体积PBS(相同注射方法)的扇贝作为阴性对照组,以不注射扇贝作为空白对照组。qRT-PCR检测干扰组扇贝卵巢中的foxl2 mRNA表达量较空白对照组下降了62%, Western blotting检测该蛋白在卵巢中的含量也明显下降,显示靶基因的表达水平被有效地敲降。组织学观察发现,栉孔扇贝foxl2干扰后的卵巢中卵母细胞形态异常、细胞核固缩,卵子发生明显受阻。表明该基因在栉孔扇贝卵子发生中起重要作用。  相似文献   

脐带缆螺旋滑移分析及力学性能研究   总被引：1，自引：0，他引：1  

李英  吴潘  冯雅萍  曹静萱 《海洋工程》2018,36(6):58-68

针对脐带缆内部螺旋层,应用Darboux标架建立螺旋结构空间坐标系,推导弯曲载荷下螺旋结构的局部变形和滑移。考虑螺旋构件间的接触和摩擦作用,建立螺旋结构的受力平衡偏微分方程,并研究螺旋角和摩擦系数对螺旋结构滑移的影响。基于同层螺旋结构本构关系相同假设,将所有螺旋结构力学性能线性叠加,拟合脐带缆整体弯曲刚度。运用建立的理论解析方法,对某双层铠装脐带缆的力学性能进行研究,并与数值模拟结果进行对比验证。对比结果表明,理论解析得到的螺旋滑移结果与数值模拟结果一致,理论解析得到的脐带缆弯曲刚度与数值模拟结果在全滑动阶段比较接近。  相似文献   

大亚湾浮游植物粒级结构对温排水和营养盐输入的响应*     

谢福武  刘华雪  黄洪辉  宋星宇 《热带海洋学报》2018,37(3):55-64

大亚湾核电站温排水对其邻近海域的生态效应日益突出。文章结合现场调查和室内模拟实验, 研究了夏季和冬季大亚湾海域沿温排水温度梯度的浮游植物粒径结构特征, 探讨了营养物质的输入可能对其产生的影响, 以期深入了解浮游植物对升温以及富营养化作用的响应机制。结果表明, 适温条件对浮游植物的生长起促进作用, 在极高温(36.0℃)环境下则产生抑制作用, 在排水口邻近高温区夏季和冬季浮游植物叶绿素a含量均呈较低分布。交互模拟实验发现不同季节浮游植物对于温度和营养盐的敏感性存在差异, 夏季营养盐对浮游植物生长的促进作用比温度明显, 冬季温度的作用则更为显著。现场观测和模拟实验均显示, 水温升高和营养盐加富均可造成小粒级浮游植物 (<20μm)所占比例的增加; 因此, 升温和营养盐输入均可能导致浮游植物粒级结构呈小型化趋势, 并对食物网能量流动与物质循环、生态系统的结构稳定性以及海洋渔业的产量造成潜在影响。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Spatial patch structure and adaptive strategy for desert shrub of Reaumuria soongorica in arid ecosystem of the Heihe River Basin     

Li  Wei  Li  Xiaoyan  Huang  Yongmei  Wang  Pei  Zhang  Cicheng 《地理学报(英文版)》2019,29(9):1507-1526

In many arid ecosystems, vegetation frequently occurs in high-cover patches interspersed in a matrix of low plant cover. However, theoretical explanations for shrub patch pattern dynamics along climate gradients remain unclear on a large scale. This context aimed to assess the variance of the Reaumuria soongorica patch structure along the precipitation gradient and the factors that affect patch structure formation in the middle and lower Heihe River Basin (HRB). Field investigations on vegetation patterns and heterogeneity in soil properties were conducted during 2014 and 2015. The results showed that patch height, size and plant-to-patch distance were smaller in high precipitation habitats than in low precipitation sites. Climate, soil and vegetation explained 82.5% of the variance in patch structure. Spatially, R. soongorica shifted from a clumped to a random pattern on the landscape towards the MAP gradient, and heterogeneity in the surface soil properties (the ratio of biological soil crust (BSC) to bare gravels (BG)) determined the R. soongorica population distribution pattern in the middle and lower HRB. A conceptual model, which integrated water availability and plant facilitation and competition effects, was revealed that R. soongorica changed from a flexible water use strategy in high precipitation regions to a consistent water use strategy in low precipitation areas. Our study provides a comprehensive quantification of the variance in shrub patch structure along a precipitation gradient and may improve our understanding of vegetation pattern dynamics in the Gobi Desert under future climate change.

  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

鄂尔多斯地块周缘垂直形变场负位错反演与应变积累研究     

张希  刘立炜  郝明  白卓立 《大地测量与地球动力学》2019,39(6):551-556

利用鄂尔多斯地块及其周缘1970～2014年的垂直形变速率场资料，借助负位错反演研究该区域长期应变积累。结果表明，地块东北缘山西断陷带中北段年均能量积累增量、剪应力强度都较高，西南缘六盘山断裂与渭河断裂西段次之；山西断陷带中南段至晋陕交界处年均剪应力强度较高且显示一定程度的能量积累；西秦岭构造区尤其西秦岭北缘断裂西段、晋冀蒙交界区也反映一定程度的能量积累特性。  相似文献   

张力腿平台筋腱支撑浮筒结构设计研究     

王火平  金文学  吕东  范志峰  王立权 《海洋工程》2018,36(3):69-75

在张力腿平台筋腱与海底桩基连接后,需要筋腱支撑浮筒为筋腱提供足够的浮力,保证筋腱在平台运抵工作海域之前不会发生倾覆。针对南海油田自主研发的张力腿平台筋腱实际尺寸及设计要求,设计了适用于1 061 mm(40英寸)筋腱、500米水深的张力腿平台筋腱支撑浮筒,并对筋腱支撑浮筒主要受力进行了分析计算,根据所计算的载荷情况对关键部件进行了有限元仿真分析,验证了结构强度的可靠性,并得到了结构的应力集中点与最大变形点,为筋腱支撑浮筒的结构设计提供了参考。  相似文献