Integration and magnitude homogenization of the Egyptian earthquake catalogue   总被引：2，自引：0，他引：2  

H. M. Hussein  K. M. Abou Elenean  I. A. Marzouk  A. Peresan  I. M. Korrat  E. Abu El-Nader  G. F. Panza  M. N. El-Gabry 《Natural Hazards》2008,47(3):525-546

The aim of the present work is to compile and update a catalogue of the instrumentally recorded earthquakes in Egypt, with uniform and homogeneous source parameters as required for the analysis of seismicity and seismic hazard assessment. This in turn requires a detailed analysis and comparison of the properties of different available sources, including the distribution of events with time, the magnitude completeness, and the scaling relations between different kinds of magnitude reported by different agencies. The observational data cover the time interval 1900–2004 and an area between 22°–33.5° N and 25°–36° E. The linear regressions between various magnitude types have been evaluated for different magnitude ranges. Using the best linear relationship determined for each available pair of magnitudes, as well as those identified between the magnitudes and the seismic moment, we convert the different magnitude types into moment magnitudes M _W, through a multi-step conversion process. Analysis of the catalogue completeness, based on the M _W thus estimated, allows us to identify two different time intervals with homogeneous properties. The first one (1900–1984) appears to be complete for M _W ≥ 4.5, while the second one (1985–2004) can be considered complete for magnitudes M _W ≥ 3.  相似文献   

Using principal component analysis (PCA) in the investigation of aquifer storage and recovery (ASR) in Damascus Basin (Syria)     

Boulos Abou Zakhem 《Environmental Earth Sciences》2016,75(15):1123

  相似文献   

Removal of diazinon pesticide from aqueous solutions using MCM-41 type materials: isotherms,kinetics and thermodynamics     

M. A. Amani  A. M. Latifi  K. Tahvildari  R. Karimian 《International Journal of Environmental Science and Technology》2018,15(6):1301-1312

In this research, ordered mesoporous silica, including MCM-41, was synthesized via sol–gel process and a propyl methacrylate-modified ordered mesoporous silica (MPS-MCM-41) was successfully synthesized via a postsynthesis grafting process. Then both MCM-41 and MPS-MCM-41 were characterized using FTIR, XRD, SEM and BET techniques. The synthesized materials were utilized as adsorbent for removal of diazinon pesticide from aqueous solutions. The effects of pH, contact time, adsorbent dose, initial concentration and temperature have been evaluated using removal efficiencies. Also, the kinetic, thermodynamic and isotherm models of diazinon adsorption were studied for the both MCM-41 and MPS-MCM-41. The results showed that the maximum adsorption capacities are 142 and 254 mg g^?1 for the MCM-41 and MPS-MCM-41, respectively, at the initial concentration of 50 mg L^?1, temperature of 298 K and adsorbent dose of 0.1 g L^?1. The highest percentages of diazinon removal are 56.4 and 87.2 (at adsorbent dose of 2 g L^?1 and the temperature of 318 K) for the MCM-41 and MPS-MCM-41, respectively. The Freundlich and Langmuir models are more compatible for describing equilibrium data of the diazinon adsorption capacity on the MCM-41 and MPS-MCM-41, respectively. Thermodynamic study indicated that the adsorption process of diazinon onto MCM-41 and MPS-MCM-41 is exothermic and has a spontaneous nature. The higher adsorption capacity and higher spontaneous nature of MPS-MCM-41 in comparison with MCM-41 might be due to the presence of the both hydrogen bonding and hydrophobic interaction between surface functional groups of MPS-MCM-41 (hydroxyl and propyl methacrylate) and diazinon functional groups.  相似文献   

Remote sensing for wetland classification: a comprehensive review     

Sahel Mahdavi  Bahram Salehi  Jean Granger  Meisam Amani  Brian Brisco  Weimin Huang 《地理信息系统科学与遥感》2018,55(5):623-658

  相似文献   

Source mechanism and source parameters of May 28, 1998 earthquake,Egypt   总被引：1，自引：0，他引：1  

K. M. Abou Elenean  H. M. Hussein 《Journal of Seismology》2007,11(3):259-274

On May 28, 1998, a moderate size earthquake of mb 5.5 occurred offshore the northwestern part of Egypt (latitude 31.45°N and longitude 27.64°E). It was widely felt in the northern part of Egypt. Being the largest well-recorded event in the area for which seismic data from the global digital network are available, it provides an excellent opportunity to study the tectonic process and present day stress field occurring along the offshore Egyptian coast. The source parameters of this event are determined using three different techniques: modeling of surface wave spectral amplitudes, regional waveform inversion, and teleseismic body waveform inversion. The results show a high-angle reverse fault mechanism generally trending NNW–SSE. The P-axis trends ENE–WSW consistently with the prevailed compression stress along the southeastern Hellenic arc and southwestern part of the Cyprean arc. This unexpected mechanism is most probably related to a positive inversion of the NW trending offshore normal faults and confirms an extension of the back thrusting effects towards the African margin. The estimated focal depth ranges from 22 to 25 km, indicating a lower crustal origin earthquake owing to deep-seated tectonics. The source time function indicates a single source with rise time and total rupture duration of 2 and 5 s, respectively. The seismic moment (M _o) and the moment magnitude (M _w) determined by the three techniques are 1.03 × 10¹⁷ Nm, 5.28; 1.24 × 10¹⁷ Nm, 5.33; and 1.68 × 10¹⁷ Nm, 5.42; respectively. The calculated fault radius, stress drop, and the average dislocation assuming a circular fault model are 7.2 km, 0.63 Mpa, and 0.11 m, respectively.  相似文献   

A 48-kyr-long slip rate history for the Jordan Valley segment of the Dead Sea Fault     

Matthieu Ferry  Mustapha Meghraoui  Najib Abou Karaki  Masdouq Al-Taj  Hani Amoush  Salman Al-Dhaisat  Majdi Barjous 《Earth and Planetary Science Letters》2007,260(3-4):394-406

We investigate the late Quaternary active deformation along the Jordan Valley segment of the left-lateral Dead Sea Fault and provide new insights on the behaviour of major continental faults. The 110-km-long fault segment shows systematic offsets of drainage systems surveyed at three sites along its southern section. The isotopic dating of six paleoclimatic events yields a precise chronology for the onset of six generations of gully incisions at 47.5 ka BP, 37.5 ka BP, 13 ka BP, 9 ka BP, 7 ka BP, and 5 ka BP. Additionally, detailed mapping and reconstructions provide cumulative displacements for 20 dated incisions along the fault trace. The individual amounts of cumulative slip consistently fall into six distinct classes. This yields: i) an average constant slip rate of 4.7 to 5.1 mm/yr for the last 47.5 kyr and ii) a variable slip rate ranging from 3.5 mm/yr to 11 mm/yr over 2-kyr- to 24-kyr-long intervals. Taking into account that the last large earthquake occurred in AD 1033, we infer 3.5 to 5 m of present-day slip deficit which corresponds to a Mw  7.4 earthquake along the Jordan Valley fault segment. The timing of cumulative offsets reveals slip rate variations critical to our understanding of the slip deficit and seismic cycle along major continental faults.  相似文献   

Using principal component analysis in the investigation of groundwater hydrochemistry of Upper Jezireh Basin,Syria     

Boulos Abou Zakhem  Abdulrahman Al-Charideh  Bassam Kattaa 《水文科学杂志》2017,62(14):2266-2279

Principal component analysis (PCA) was applied to hydrochemical and isotopic data of 34 groundwater samples. This allowed the reduction of 20 variables to four significant PCs that explain 81.9% of the total variance; F1 (47.1%) explains the groundwater mineralization, whereas F2 (17%) shows isotopic enrichment and nitrate pollution. Based on an iso-factor scores map of F1, three water zones were delineated: Zone A (F1 < ?1), with fresh groundwater from the unconfined aquifer; Zone B (1 > F1 > ?1), with moderate mineralization from the confined–unconfined aquifer boundary; and Zone C (F1 > 1), with the most mineralized hot water from the confined aquifer. The iso-factor scores map of F2 delineates positive values representing samples from the unconfined aquifer, with freshwater and nitrate contamination associated with stable isotope enrichment, whereas negative values represent samples from the confined aquifer. The results clearly demonstrate the usefulness of PCA in groundwater hydrochemistry investigations.  相似文献   

Neo-deterministic seismic hazard assessment in North Africa   总被引：2，自引：2，他引：0  

T. Mourabit  K. M. Abou Elenean  A. Ayadi  D. Benouar  A. Ben Suleman  M. Bezzeghoud  A. Cheddadi  M. Chourak  M. N. ElGabry  A. Harbi  M. Hfaiedh  H. M. Hussein  J. Kacem  A. Ksentini  N. Jabour  A. Magrin  S. Maouche  M. Meghraoui  F. Ousadou  G. F. Panza  A. Peresan  N. Romdhane  F. Vaccari  E. Zuccolo 《Journal of Seismology》2014,18(2):301-318

North Africa is one of the most earthquake-prone areas of the Mediterranean. Many devastating earthquakes, some of them tsunami-triggering, inflicted heavy loss of life and considerable economic damage to the region. In order to mitigate the destructive impact of the earthquakes, the regional seismic hazard in North Africa is assessed using the neo-deterministic, multi-scenario methodology (NDSHA) based on the computation of synthetic seismograms, using the modal summation technique, at a regular grid of 0.2?×?0.2°. This is the first study aimed at producing NDSHA maps of North Africa including five countries: Morocco, Algeria, Tunisia, Libya, and Egypt. The key input data for the NDSHA algorithm are earthquake sources, seismotectonic zonation, and structural models. In the preparation of the input data, it has been really important to go beyond the national borders and to adopt a coherent strategy all over the area. Thanks to the collaborative efforts of the teams involved, it has been possible to properly merge the earthquake catalogues available for each country to define with homogeneous criteria the seismogenic zones, the characteristic focal mechanism associated with each of them, and the structural models used to model wave propagation from the sources to the sites. As a result, reliable seismic hazard maps are produced in terms of maximum displacement (D _max), maximum velocity (V _max), and design ground acceleration.  相似文献   

Trimmed L-moments (1,0) for the generalized Pareto distribution     

Ummi Nadiah Ahmad  Ani Shabri  Zahrahtul Amani Zakaria 《水文科学杂志》2013,58(6):1053-1060

Abstract

Statistical analysis of extremes is often used for predicting the higher return-period events. In this paper, the trimmed L-moments with one smallest value trimmed—TL-moments (1,0)—are introduced as an alternative way to estimate floods for high return periods. The TL-moments (1,0) have an ability to reduce the undesirable influence that a small value in the statistical sample might have on a large return period. The main objective of this study is to derive the TL-moments (1,0) for the generalized Pareto (GPA) distribution. The performance of the TL-moments (1,0) was compared with L-moments through Monte Carlo simulation based on the streamflow data of northern Peninsular Malaysia. The result shows that, for some cases, the use of TL-moments (1,0) is a better option as compared to L-moments in modelling those series.

Citation Ahmad, U.N., Shabri, A. & Zakaria, Z.A. (2011) Trimmed L-moments (1,0) for the generalized Pareto distribution. Hydrol.Sci. J. 56(6), 1053–1060.  相似文献   

Use of satellite data and GIS for assessing the agricultural potentiality of the soils South Farafra Oasis, Western Desert, Egypt     

Wael Ahmed Mohamed Abdel Kawy  Islam H. Abou El-Magd 《Arabian Journal of Geosciences》2013,6(7):2299-2311

Overpopulation and food security are the main global problems alert decision makers. In developing countries, such problem put extra pressure for horizontal expansion for agricultural development. The rapid sprawl of urbanized areas on the alluvial land of the River Nile and delta to accommodate the population growth has encouraged governmental and private sector for agricultural expansion in the desert. Unless there are reliable information and accurate studies for land and soil suitability, there will be a collapse of such investment. To evaluate the potential suitability of soil for agriculture development in areas of the western desert, satellite images, geographic information, and field survey including soil profiles and artesian water samples with laboratory analysis were integrated to classify the soils according their suitability for specific crop. The main land qualities of the different mapping units and the crop requirement were rated and matched to obtain the current and potential land suitability using Automated Land Evaluation System “ALES”. The study found that the main physiographic units are plateaus, hilland, mountain, and depression floor. But there are three limiting parameters for land suitability which are the lack of nutrient elements, wind erosion vulnerability, and soil texture. The study concluded that the best crops adapted with the soil conditions and could be feasible for economic use are: (1) native vegetation such as agol, sand trees, sammar, halfaa, bawaal, qordaob, bardi, and qortom; (2) filed crops such as onion, garlic, watermelon and wheat; and (3) fruits such as olive and date palms.  相似文献