Argillaceous rocks cover about one thirds of the earth's surface. The major engineering problems encountered with weak- to medium-strength argillaceous rocks could be slaking, erosion, slope stability, settlement, and reduction in strength. One of the key properties for classifying and determining the behavior of such rocks is the slake durability. The concept of slake durability index (SDI) has been the subject of numerous researches in which a number of factors affecting the numerical value of SDI were investigated. In this regard, this paper approaches the matter by evaluating the effects of overall shape and surface roughness of the testing material on the outcome of slake durability indices.
For the purpose, different types of rocks (marl, clayey limestone, tuff, sandstone, weathered granite) were broken into chunks and were intentionally shaped as angular, subangular, and rounded and tested for slake durability. Before testing the aggregate pieces of each rock type, their surface roughness was determined by using the fractal dimension. Despite the variation of final values of SDI test results (values of Id), the rounded aggregate groups plot relatively in a narrow range, but a greater scatter was obtained for the angular and subangular aggregate groups. The best results can be obtained when using the well rounded samples having the lowest fractal values. An attempt was made to analytically link the surface roughness with the Id parameter and an empirical relationship was proposed. A chart for various fractal values of surface roughness to use as a guide for slake durability tests is also proposed. The method proposed herein becomes efficient when well rounded aggregates are not available. In such condition, the approximate fractal value for the surface roughness profile of the testing aggregates could be obtained from the proposed chart and be plugged into the empirical relation to obtain the corrected Id value. The results presented herein represent the particular rock types used in this study and care should be taken when applying these methods to different type of rocks. 相似文献
Shales and graywackes were first metamorphosed at 650°C and then partially melted at 700 and 750°C at 2, 4, 6, and 8 kilobars in the presence of 0.75m NaCl−0.45m KCl and 0.225m CaCl2−0.750m NaCl solutions. In experiments with shales,KK+Na ratio in the decreases with increasing pressure at 650 and 700°C; however, at 750°C this ratio is equal to 0.5 at all pressures investigated. This suggests that melts at 700°C and at 2 to 8 kilobars pressure may be affected metasomatically whereas melts at 700°C and in the same pressure range will not. Melt composition produced in the shale-KClNaCl experiments is granite at 2, 4 and 6 kilobars pressure, whereas the melt compositions in the shale-CaCl2NaCl experiments range from quartz monzonite (2–5 kilobars) to granodiorite (above 5 kilobars). Experiments with graywacke-KClNaCl produced melts of trondhjemite composition at 2, 2.5, 4, 6, and 7.5 kilobars.
These results indicate that partial melting of crustal rocks such as metamorphosed shales and graywackes in the deeper parts of the crust can produce large volumes of granitic magmas ranging in composition from true granite to trondhjemite to quartz monzonite and granodiorite. 相似文献
Using archival ASCA and ROSAT observations of RE 0751+14, X- ray energy spectra, pulse profiles and the results of pulse timing
analysis are presented. The energy spectra are well-fitted by a blackbody model at low energy and a Raymond-Smith model at
high energy, together with a partial covering absorber. A fluorescence emission line at 6.4 keV with an equivalent width ∼
220 eV was resolved for the first time.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
Afyon Zone, which was derived from the Anatolide–Tauride platform during closure of the Neo-Tethys, is made up of pre-Mesozoic
basement and unconformably overlying Triassic–Early Tertiary cover series. The Afyon Zone contains widespread metavolcanic
rocks, which are dominated by rhyolite, dacite, and trachyandesite. They form a distinct volcanic succession, which is separated
from the underlying Silurian–Lower Carboniferous metacarbonates and meta-siliciclastics by a regional unconformity. Trachyandesitic
metavolcanics are made up of massive lava flows, pyroclastics and epiclastics, less frequently, domes and dikes, which were
developed on a deeply eroded subaerial landmass. U/Pb and Pb/Pb zircon geochronology yielded Lower Triassic (~250 Ma) ages,
which are interpreted as extrusion age of trachyandesitic volcanics. Based on the stratigraphic, geochronological, and geochemical
data, we suggest that these Lower Triassic magmatic rocks represent an extensional tectonic setting on the northern active
margin of the Gondwana, which led to the development of the northern branch of the Neo-Tethys. 相似文献
Slake durability index (Id2) is an important engineering parameter to assess the resistance of clay-bearing and weak rocks to erosion and degradation. Standard test sample preparation for slake durability test is difficult for some rock types and the test is time-consuming. The paper reports an attempt to define Id2 using other parameters that are simpler to obtain. In this study, three different artificial neural network approaches, namely feed-forward back propagation (FFBP), radial basis function based neural network (RBNN), and generalized regression neural networks (GRNN) were used for estimating Id2. The determination coefficient (R2), root mean square error and mean absolute relative error statistics were used as evaluation criteria of the FFBP, RBNN, and GRNN models. The experimental results were compared with these models. The comparison results indicate that the GRNN models are superior to the FFBP and RBNN models in modeling of the slake durability index (Id2). 相似文献
Gem quality andradite-rich garnet (IUC-1), obtained from the Miocene trachyte dome near Ankara city (Turkey), has been identified as a potential natural secondary reference material for U-Pb dating. In this study, U-Pb dating was performed in five different laboratories using isotope dilution TIMS and laser ablation ICP-MS to determine the homogeneity of euhedral garnet crystals. The U-Pb ID-TIMS data for IUC-1 yielded 207Pb/235U and 206Pb/238U ages of 20.9 ± 0.4 and 20.6 ± 0.8 Ma respectively, and these values are consistent with U-Pb LA-ICP-MS analyses, in which different garnet crystals yielded ages of 20.8 ± 0.1, 20.7 ± 0.1, 20.7 ± 0.2 and 20.2 ± 0.1 Ma. An andradite (IUC-2) from the Serçeören wollastonite skarn (Turkey) can be used as a secondary reference material provided detailed imaging of the crystals is undertaken. ID-TIMS data yielded 207Pb/235U and 206Pb/238U ages of 20.4 ± 0.4 and 20.9 ± 1.0 Ma respectively, and yielded U-Pb ages on different grains of 20.5 ± 0.1, 20.7 ± 1.0, 20.8 ± 1.7 and 20.9 ± 1.6 Ma. The assigned weighted mean age of IUC-1 (20.4 ± 0.5 Ma, 2s) is proposed as a 2023 reference value. IUC-1 garnet is expected to contribute significantly to rapidly developing garnet geochronology in the near future. 相似文献
Experiments were conducted to test the hypothesis that higher silica rhyolites of the St. Francois Mountains, Missouri, USA are products of fractional crystallization of lower silica granitic magmas. Experiments were carried out at pressures of 0.5 and 1.0 kb under water-saturated conditions, temperatures ranged from 800° to 925°C and the oxygen fugacity for all experiments were maintained at, or near, the nickel-nickel oxide (NNO) buffer level.
Results of experiments with Butler Hill granite indicate that fractionation of near liquidus silicate phases, orthopyroxene and plagioclase, causes an enrichment of SiO2 in the residual melts. Mineralogical and chemical compositions of the experimental charges are similar to that of higher silica Grassy Mountain rhyolites of the St. Francois Mountains. Experiments also show that at pressures of 1.0 Kb or higher orthopyroxene reacts with the hydrous melt to produce biotite which is a common phase in the plutonic rocks of the St. Francois Mountains. 相似文献
In this paper the aim is to investigate whether there are differences between the dispersion and non-dispersion solutions on tsunami propagation. For this purpose, two numerical models of tsunami propagation are compared. One of these numerical models is a nondispersive model that uses Saint Venant equations and the other is a dispersive model that uses Boussinesq equations. The tsunamis resulting from a submarine mass failure (SMF) which is settled at the bottom of the north eastern Sea of Marmara are examined. An analytical solution considering wave dispersion is developed for obtaining near-field tsunami amplitudes above the submarine mass failure. Numerical modeling is used at the sea surface from the common boundary called as liquid boundary with incident waves up to the coastal regions to get the tsunami amplitudes. The output of the analytical model is taken as the disturbances for the numerical method. In the numerical solutions TELEMAC-2D software system is used for both dispersive and nondispersive modeling. The results of the dispersive and nondispersive models are compared to each other. Both temporal and spatial differences in the amplitudes and wave shapes are examined. The obtained results demonstrate that there are no noticeable differences between the dispersion and non-dispersion solutions except some special cases and some special landslide velocities. 相似文献
Five‐step sequential extractions were employed to fractionation of Ni, Cr and Cu in soil polluted by anthropogenic activities and determine the mobility of the metals. Twelve samples were collected on an agricultural area that was located near an airport and intercity roads in Elazig‐Turkey. Exchangeable, organically bounded, carbonate bounded, adsorbed species on Fe and Mn oxides and residual species (except silicates) of Ni, Cr and Cu were extracted into solution by using CaCl2, Na4P2O7, Na2EDTA, NH2OH–HCl and HNO3–H2O2, respectively. Mobile metal concentrations in fractions and total recoverable in soils were determined by using inductively coupled plasma‐optical emission spectrometry (ICP‐OES). Total recoverable Ni, Cr and Cu concentrations were in the range of 40–119, 45–126 and 23–72 mg kg?1, respectively. It was observed that total concentrations of metals in some of the samples were higher than the permitted values. The sum of the mobile percentages of metals was found to be lower than 50%. The Ni, Cr and Cu percentages for exchangeable species are in the ranges of 0.18–1.64, 0.03–0.59 and 0.42–2.53%, respectively. 相似文献
