排序方式： 共有22条查询结果，搜索用时 31 毫秒
1.
The occurrence of permafrost in bedrock in northern Fennoscandia and its dependence on past and presently ongoing climatic variations was investigated with one- (1D) and two-dimensional (2D) numerical models by solving the transient heat conduction equation with latent heat effects included. The study area is characterized by discontinuous permafrost occurrences such as palsa mires and local mountain permafrost. The ground temperature changes during the Holocene were constructed using climatic proxy data. This variation was used as a forcing function at the ground surface in the calculations. Several versions of the present ground temperature were applied, resulting in different subsurface freezing–thawing conditions in the past depending on the assumed porosity and geothermal conditions.Our results suggest that in high altitude areas with a cold climate (present mean annual ground temperature between 0°C and −3°C), there may have been considerable variations in permafrost thickness (ranging from 0 to 150 m), as well as periods of no permafrost at all. The higher is the porosity of bedrock filled with ice, the stronger is the retarding effect of permafrost against climatic variations.Two-dimensional models including topographic effects with altitude-dependent ground temperatures and slope orientation and inclination dependent solar radiation were applied to a case of mountain permafrost in Ylläs, western Finnish Lapland, where bedrock permafrost is known to occur in boreholes to a depth of about 60 m. Modelling suggests complicated changes in permafrost thickness with time as well as contrasting situations on southern and northern slopes of the mountain.Extrapolating the climatic warming of the last 200 years to the end of the next century when the anticipated increase in the annual average air temperature is expected to be about 2 K indicates that the permafrost occurrences in bedrock in northern Fennoscandia would be thawing rapidly in low-porosity formations. However, already a porosity of 5% filled with ice would retard the thawing considerably. 相似文献
2.
3.
4.
Mira Markovaara-Koivisto Antti E.K. Ojala Jussi Mattila Ilmo Kukkonen Ilkka Aro Arto Pullinen Pekka Hänninen Maarit Middleton Aleksi Sutinen Juha Majaniemi Timo Ruskeeniemi Raimo Sutinen 《地球表面变化过程与地形》2020,45(12):3011-3024
The cyclic nature of glaciations and related postglacial faulting represents a risk for the deep geological disposal of spent nuclear fuel in areas likely to be affected by future glaciations. Seismic history was therefore studied by means of detecting geomorphological structures on airborne laser scanning digital elevation models and underground by excavating in an esker and trenching across a postglacial fault located in northern Fennoscandia. OLS dating and assessing the geomorphological structures was used for timing of the seismic history. The results suggest that the faulting of different segments in the Pasmajärvi complex is due to at least two late Weichselian events, which probably occurred both subglacially and postglacially. The most reliable input for the moment magnitude estimates was vertical slip profiles, and therefore these estimates (MW ≈ 6.4–6.9) are suggested. © 2020 John Wiley & Sons, Ltd. 相似文献
5.
6.
Climatic temperature changes at the ground surface propagate downward to the subsurface creating transient disturbances to the temperature—depth (T(z)) profile. Due to the poor thermal diffusivity of rocks the disturbances are preserved long times in the bedrock, and in a conductive regime it is possible to reveal the ground surface temperature (GST) history from borehole temperature data with inversion techniques. Geothermal temperature measurements thus provide a source of palaeoclimatic information which so far has not been utilized extensively. Inversion of GST history is, however, not straightforward and any disturbing effects should be excluded before the data can be utilized in inversion. Groundwater flow is of special importance in this respect because it is a common phenomenon in bedrock and convection often produces temperature—depth profiles resembling those affected by palaeoclimatic GST changes. In interpreting temperature—depth (T(z)) logs it is therefore not always clear whether the recorded vertical gradient variations should be attributed to the effects of palaeoclimatic ground surface temperature (GST) changes or to groundwater circulation. Using several synthetic T(z) profiles and applying general least squares inversion techniques we simulate a situation of “misinterpreting” the curvature of the T(z) profile in terms of palaeoclimatic GST changes, although it is actually produced by convective heat transfer due to groundwater flow. For comparison the opposite case is also studied, namely, genuine palaeoclimatic effects are misinterpreted as being due to disturbances caused by groundwater flow. A homogeneous half-space model is used to model T(z) profiles disturbed conductively by GST changes during the time interval 10–10000 yr B.P. and a one-dimensional porous layer model is applied for convective heat transfer calculations. The results indicate that a given T(z) profile can be attributed to either of these effects with reasonable parameter values. In addition to the synthetic T(z) profiles, a case history from a 958 m deep drill hole at Lavia, southwestern Finland, is presented. Special care is needed in analyzing T(z) data. A knowledge of geothermal data, such as temperature, thermal conductivity and diffusivity is not necessarily adequate for determining which of the phenomena (or whether a combination of them) provides the most probable interpretation of a T(z) profile. Additional information on the hydrogeological properties of the drilled strata is essential. 相似文献
7.
Heather Schijns Suvi Heinonen Douglas R. Schmitt Pekka Heikkinen Ilmo T. Kukkonen 《Geophysical Prospecting》2009,57(6):997-1008
A traveltime inversion technique is applied to model the upper ∼40 m of the subsurface of a glaciated shield rock area in order to calculate static corrections for a multi-azimuth multi-depth walk-away vertical seismic profile and a surface seismic reflection profile. First break information from a seismic refraction survey is used in conjunction with a ray-tracing program and an iterative damped least-squares inversion algorithm to create a two-dimensional model of the subsurface. The layout of the seismic survey required crooked seismic lines and substantial gaps in the source and receiver coverage to be accounted for. Additionally, there is substantial topographical variation and a complex geology consisting of glaciofluvial sediment and glacial till overlying a crystalline bedrock. The resolution and reliability of the models is measured through a parameter perturbation technique, normalized χ2 values, root means square traveltime residuals and comparison to known geology. 相似文献
8.
Determination of the rate of ammonification and nitrification in natural water by kinetic method 总被引：2，自引：0，他引：2
A method for simultaneous determination of the rate of ammonification and nitrification in natural water is proposed. It is
based on the presentation of these processes as two successive first-order reactions, the use of field data on the concentrations
of different N forms, and the laboratory modeling of the processes under study. The values of rate constants and reactions
rates that are determined by the above method generally coincide with the relevant values obtained by other methods for Karelian
water bodies. 相似文献
9.
N. Junno E. Koivisto I. Kukkonen A. Malehmir C. Wijns M. Montonen 《Geophysical Prospecting》2020,68(1):82-102
The Kevitsa mafic-ultramafic intrusion, located within the Central Lapland Greenstone Belt in northern Finland, hosts a large, disseminated Ni–Cu–PGE sulphide deposit. A three-dimensional seismic reflection survey was conducted over the Kevitsa intrusion in 2010 primarily for open-pit mine planning and for deep mineral exploration purposes. In the Kevitsa three-dimensional seismic data, laterally continuous reflections are observed within a constrained region within the intrusion. In earlier studies, it has been suggested that this internal reflectivity mainly originates from contacts between the tops and more sulphide-rich bottoms of smaller scale, internally differentiated magma layers that represent a spectrum of olivine pyroxenites. However, this interpretation is not unequivocally supported by the borehole data. In this study, data mining, namely the Self-Organizing Map analysis, of extensive Kevitsa borehole data is used to investigate the possible causes for the observed internal reflectivity within the Kevitsa intrusion. Modelling of the effect of mineralization and alteration on the reflectivity properties of Kevitsa rock types, based on average modal compositions of the rock types, is presented to support the results of the Self-Organizing Map analysis. Based on the results, we suggest that the seismic reflectivity observed within the Kevitsa intrusion can possibly be attributed to alteration, and may also be linked to the presence of sulphide minerals. 相似文献
10.
A.‐J. Soini I. T. Kukkonen T. Kohout A. Luttinen 《Meteoritics & planetary science》2020,55(2):402-425
We report direct measurements of thermal diffusivity and conductivity at room temperature for 38 meteorite samples of 36 different meteorites including mostly chondrites, and thus almost triple the number of meteorites for which thermal conductivity is directly measured. Additionally, we measured porosity for 34 of these samples. Thermal properties were measured using an optical infrared scanning method on samples of cm‐sizes with a flat, sawn surface. A database compiled from our measurements and literature data suggests that thermal diffusivities and conductivities at room temperature vary largely among samples even of the same petrologic and chemical type and overlap among, for example, different ordinary chondrite classes. Measured conductivities of ordinary chondrites vary from 0.4 to 5.1 W m?1 K?1. On average, enstatite chondrites show much higher values (2.33–5.51 W m?1 K?1) and carbonaceous chondrites lower values (0.5–2.55 W m?1 K?1). Mineral composition (silicates versus iron‐nickel) and porosity control conductivity. Porosity shows (linear) negative correlation with conductivity. Variable conductivity is attributed to heterogeneity in mineral composition and porosity by intra‐ and intergranular voids and cracks, which are important in the scale of typical meteorite samples. The effect of porosity may be even more significant for thermal properties than that of the metal content in chondrites. 相似文献