排序方式： 共有27条查询结果，搜索用时 15 毫秒
1.
Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (kh=0), calculated by both the approaches, is 1.60 while for an earthquake with kh=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study. 相似文献
2.
To estimate static and seismic active earth pressure (Pad) on a rigid retaining wall, numerical analyses using different step sizes have been carried out in this paper, based on the
modified Culmann line method by considering Coulomb’s planar rupture surface. Equivalent pseudo-static seismic forces are
considered in the analysis. A new concept of modified unit weight by considering ground surcharge is introduced under static
and seismic conditions. By numerical analysis, area of soil (A) has been estimated to obtain the ratio of A/A0 where A0 is θh2, θ is the angle between retaining structure and ground surface and h is the vertical height of the wall. This ratio remains constant for a particular type of soil and has been used to estimate
the maximum active earth pressure using force diagram. Results are provided in tabular form for easy calculation of the coefficient
of static and seismic active earth pressure. Present results by considering the new technique, compares well with the results
obtained by earlier researchers. 相似文献
3.
Seismic rotational displacement of gravity walls by pseudo-dynamic method: Passive case 总被引：8，自引：0，他引：8
Prediction of the seismic rotational displacements of retaining wall under passive condition is an important aspect of design in earthquake prone region. In this paper, the pseudo-dynamic method is used to compute the rotational displacements of rigid retaining wall supporting cohesionless backfill under seismic loading for the passive earth pressure condition. The proposed method considers time, phase difference and effect of amplification in shear and primary waves propagating through both the backfill and the retaining wall. The influence of ground motion characteristics on rotational displacement of the wall is evaluated. Also the effects of variation of parameters like wall friction angle, soil friction angle, amplification factor, shear wave velocity, primary wave velocity, period of lateral shaking, horizontal and vertical seismic accelerations on the rotational displacements are studied. The rotational displacement of the wall increases substantially with increase in amplification of both shear and primary waves, time of input motion, period of lateral shaking and decreases with increase in soil friction angle, wall friction angle. The rotational displacements of the wall also increase when the effect of wall inertia is taken into account. Results are provided in graphical form. 相似文献
4.
Deepankar Choudhury Amey Deepak Katdare Anindya Pain 《Geotechnical and Geological Engineering》2014,32(2):391-402
In earthquake prone areas, calculation of seismic active earth pressure on retaining wall is very important. Analytical methods till date for computation of seismic active earth pressure do not consider the effect of Rayleigh wave though it constitutes about 67 % of the total seismic energy. In this paper a new dynamic approach is proposed by considering all possible seismic waves viz. primary, shear and Rayleigh waves for estimation of seismic active earth pressure on rigid retaining wall by satisfying all the boundary conditions. Limit equilibrium method is used for estimation of optimised seismic active earth pressure for a rigid retaining wall supporting cohesionless backfill with critical combinations of seismic accelerations. The seismic influence zone obtained in this study is about 22 and 17 % larger when compared with available pseudo-static and pseudo-dynamic methods respectively, which indicates the significant effect of Rayleigh wave. Also, there is an increase of about 14 and 6 % in seismic active earth pressure coefficient when the present results are typically compared with pseudo-static and pseudo-dynamic methods respectively. Moreover present results compare well with the available experimental results. Present results are more critical for the design estimation of seismic active earth pressure by considering all major seismic waves as proposed in the new dynamic approach. 相似文献
5.
Seismic bearing capacity of shallow strip footings 总被引：6，自引：0，他引：6
Deepankar?ChoudhuryEmail author Kanakapura?S.?Subba Rao 《Geotechnical and Geological Engineering》2005,23(4):403-418
Seismic bearing capacity of shallow strip footings in soil has been obtained in the form of pseudo-static seismic bearing capacity factors Ncd, Nqd and Nd, denoting the cohesion, surcharge and unit weight components, respectively, by an extensive numerical iteration technique. Limit equilibrium method of analysis with composite failure surface is assumed. The validity of the principle of superposition is examined. Effects of both the horizontal and vertical seismic acceleration coefficients have been found to always reduce the ultimate bearing capacity significantly. Results obtained by the present method of analysis are compared with the available results and are found to be the least in the seismic case. 相似文献
6.
In the present study an analytical procedure based on finite element technique is proposed to investigate the influence of vertical load on deflection and bending moment of a laterally loaded pile embedded in liquefiable soil, subjected to permanent ground displacement. The degradation of subgrade modulus due to soil liquefaction and effect of nonlinearity are also considered. A free headed vertical concrete elastic nonyielding pile with a floating tip subjected to vertical compressive loading, lateral load, and permanent ground displacement due to earthquake motions, in liquefiable soil underlain by nonliquefiable stratum, is considered. The input seismic motions, having varying range of ground motion parameters, considered here include 1989 Loma Gilroy, 1995 Kobe, 2001 Bhuj, and 2011 Sikkim motions. It is calculated that maximum bending moment occurred at the interface of liquefiable and nonliquefiable soil layers and when thickness of liquefiable soil layer is around 60% of total pile length. Maximum bending moment of 1210 kNm and pile head deflection of 110 cm is observed because of 1995 Kobe motion, while 2001 Bhuj and 2011 Sikkim motions amplify the pile head deflection by 14.2 and 14.4 times and bending moment approximately by 4 times, when compared to nonliquefiable soil. Further, the presence of inertial load at the pile head increases bending moment and deflection by approximately 52% when subjected to 1995 Kobe motion. Thus, it is necessary to have a proper assessment of both kinematic and inertial interactions due to free field seismic motions and vertical loads for evaluating pile response in liquefiable soil. 相似文献
7.
The detrimental effects of an earthquake are strongly influenced by the response of soils subjected to dynamic loading. The behavior of soils under dynamic loading is governed by the dynamic soil properties such as shear wave velocity, damping characteristics and shear modulus. Worldwide, it is a common practice to obtain shear wave velocity (V s in m/s) using the correlation with field standard penetration test (SPT) N values in the absence of sophisticated dynamic field test data. In this paper, a similar but modified advanced approach has been proposed for a major metro city of eastern India, i.e., Kolkata city (latitudes 22°20′N–23°00′N and longitudes 88°04′E–88°33′E), to obtain shear wave velocity profile and soil site classification using regression and sensitivity analyses. Extensive geotechnical borehole data from 434 boreholes located across 75 sites in the city area of 185 km2 and laboratory test data providing information on the thickness of subsoil strata, SPT N values, consistency indices and percentage of fines are collected and analyzed thoroughly. A correlation between shear wave velocity (V s) and SPT N value for various soil profiles of Kolkata city has been established by using power model of nonlinear regression analysis and compared with existing correlations for other Indian cities. The present correlations, having regression coefficients (R 2) in excess of 0.96, indicated good prediction capability. Sensitivity analysis predicts that significant influence of soil type exists in determining V s values, for example, typical silty sand shows 30.4 % increase in magnitude of V s as compared to silt of Kolkata city. Moreover, the soil site classification shows Class D and Class E category of soil that exists typically in Kolkata city as per NEHRP (Recommended provisions for seismic regulations for new buildings and other structures—Part 1: Provisions. Prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency (Report FEMA 450), Washington, DC, 2003) guidelines and thereby highlighting the seismic vulnerability of the city. The results presented in this study can be utilized for seismic microzonation, ground response analysis and hazard assessment for Kolkata city.
相似文献8.
Sunil M. Rangari Deepankar Choudhury D. M. Dewaikar 《Geotechnical and Geological Engineering》2013,31(2):569-580
In this paper, the limit equilibrium method is used to compute seismic passive earth pressure coefficients and the vertical uplift capacity of horizontal strip anchors in presence of both horizontal and vertical pseudo-static earthquake forces. By considering a simple planar failure surface, distribution of soil reaction is obtained through the use of Kötter’s equation. Presence of pseudo-static seismic forces induces a considerable reduction in the seismic passive earth pressure coefficients. The reduction in seismic passive earth pressure coefficients increases with increase in magnitude of the earthquake accelerations in both horizontal and vertical directions and with increase in wall friction angle. The vertical uplift capacity of horizontal strip anchor is obtained for various values of soil friction angle, embedment ratio and seismic acceleration coefficients in both horizontal and vertical directions by using rigorous computational optimization. Proper justification for selected value of wall friction angle is established. Results are presented in the form of non-dimensional breakout factor for anchor. A significant reduction in breakout factor is observed in presence of both the seismic acceleration coefficients whereas breakout factor increases with increase in soil friction angle and embedment ratio even under the seismic condition. Angles of failure planes keep changing with change in seismic acceleration coefficients and failure zone shifts towards the critical direction of seismic acceleration coefficients. Present results are compared and found in good agreement with some specific available results in literature. 相似文献
9.
R. Nagendra Satish J. Patel Rakesh Deepankar A. N. Reddy 《Journal of the Geological Society of India》2010,76(5):525-532
Well preserved ichnofossils were found in Kulakkalnattam sandstone exposed at Kulakkalnattam stream in Ariyalur area, Cauvery Basin. It consists of infaunal structures of both suspension and deposit feeders. Five ichnofossils are present in a fine to coarse grain sandstone which includes Ophiomorpha, Palaeophycus, Planolites Skolithos, and Thalassinoides. The study infers that ichnofossils Skolithos and Ophiomorpha are infaunal colonization of the suspension feeders in high energy condition in shifting substrate, whereas Thalassinoides and Planolites-Palaeophycus ichnofossils indicate infaunal deposit feeders living at the sediment-sediment interface in low to moderate energy conditions. Furthermore, the abundance and diversity of the trace fossils indicates there was alternatively fluctuations in energy conditions which lead to development of Skolithos and Cruziana ichnofacies type condition during the deposition of Kulkkallanattam sandstone in foreshore-shoreface environments. 相似文献
10.
A method of analysis for the uplift capacity of pile anchors in cohesionless soil is proposed using Kötter’s equation that facilitates computation of the distribution of soil reaction on the axis-symmetric failure surface, which is assumed to be the frustum of a cone with a characteristic angle of inclination with the pile–soil interface. A closed-form solution for the uplift capacity is obtained with no requirement of any charts or tables. Empirical relations using available literature are proposed for expressing critical embedment ratio and computation of net uplift capacity. The results are compared with a set of experimental data for 28 cases, ranging from loose to dense cohesionless soil up to maximum embedment ratio of 40, vis-à-vis available theoretical solutions. The proposed method leads to the predictions that are in good agreement with the experimental results. It further demonstrates the successful application of Kötter’s equation in the estimation of uplift capacity of pile anchors. 相似文献