排序方式： 共有42条查询结果，搜索用时 15 毫秒
1.
Automated reconstruction of building objects from aerial images is a complex problem due to the diversity of buildings as well as noise and low contrast of images, which are the results of distant photography, atmospheric effects and poor illumination. In this paper, a semi-automated approach to the reconstruction of parametric building models from aerial images is presented, which works with line segments extracted from the image. The model is selected interactively from a library of parametric models. A perceptual grouping technique is used to select the most significant image lines in terms of relations such as proximity and parallelism. Model lines are searched for the same relations as in the grouped image lines, and the corresponding lines undergo a matching procedure, which determines whether or not a match can be found between the given model and image lines. An experiment with aerial images of flat-roof and gable-roof buildings is shown and its results indicate the robustness and efficiency of the proposed approach. 相似文献
2.
Understanding the impacts of land‐use changes on hydrology at the watershed scale can facilitate development of sustainable water resource strategies. This paper investigates the hydrological effects of land‐use change in Zanjanrood basin, Iran. The water balance was simulated using the Soil and Water Assessment Tool (AVSWAT2000). Model calibration and uncertainty analysis were performed with sequential uncertainty fitting (SUFI‐2). Simulation results from January 1998 to December 2002 were used for parameter calibration, and then the model was validated for the period of January 2003 to December 2004. The predicted monthly streamflow matched the observed values: during calibration the correlation coefficient was 0·86 and the Nash–Sutcliffe coefficient 0·79, compared with 0·80 and 0·79, respectively, during validation. The model was used to simulate the main components of the hydrological cycle, in order to study the effects of land‐use changes in 1967, 1994 and 2007. The study reveals that during 1967 a 34·5% decrease of grassland with concurrent increases of shrubland (13·9%), rain‐fed agriculture (12·1%), bare ground (5·5%) irrigated agriculture (2·2%), and urban area (0·7%) led to a 33% increase in the amount of surface runoff and a 22% decrease in the groundwater recharge. Furthermore, the area of sub‐basins that was influenced by high runoff (14–28 mm) increased. The results indicate that the hydrological response to overgrazing and the replacing of rangelands (grassland and shrubland) with rain‐fed agriculture and bare ground (badlands) is nonlinear and exhibits a threshold effect. The runoff rises dramatically when more than 60% of the rangeland is removed. For groundwater this threshold lies at an 80% decrease in rangeland. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
3.
Crop models are useful tools for assessing the impact of climate change on crop production. The dynamic crop-growth model, CERES-Wheat is used to examine crop management responses, including yield, under six climate change scenarios for the years 2025 and 2050 on the Estate of Imperial College at Wye, Kent, U.K. Sensitivity analysis shows a dry matter yield decrease in response to increases in temperature alone. CERES-Wheat was then constrained to assess the crop performance under water-limited production scenarios with different soils, and the results show that crop grain yield actually increases, largely due to CO2 fertilisation leading to increased rates of photosynthesis. Different management practices (planting dates and nitrogen application) were applied to find the best adaptation strategies. In general, `early' sowing (10th September) had the highest simulated yield, and `late' sowing (10th November) the lowest. For the soils tested, the highest and sustained crop production was obtained from Hamble soils (silt loam) compared with either the Fyfield (sandy) or Denchworth (clay). Adding nitrogen and other fertilisers would likely be necessary to take full advantage of the CO2 fertilisationeffect and to compensate, in some cases, for yield losses caused by climate change where water shortage becomes serious. 相似文献
4.
The recently released Planck data have constrained 4-dimensional inflationary parameters even more accurately than ever. We consider an extension of the braneworld model with induced gravity and a non-minimally coupled scalar field on the brane. We constraint the inflation parameters in this setup, by adopting six types of potential, in confrontation with the joint Planck + WMAP9 + BAO data. We show that a potential of the type V(φ)=V 0exp(?βφ) has the best fit with newly released observational data. 相似文献
5.
One of the main problems in reservoirs is sedimentation which reduces the operating life of dams if a proper plan and analysis method are not in place.The techniques to manage sediment in reservoirs include several sustainable management techniques that route sediment through or around the reservoir.One of the main economical methods in arid and semi-arid regions is pressurized flushing using moderate drawdown of the water level of the reservoir to evacuate sediment deposited behind dams.In the current study,the effect of a new structure called a dendritic bottomless extended(DBE)outlet structure at three angles of 30°,45°,and 60°on pressurized flushing efficiency was investigated.Consequently,45 experiments were designed for three discharge rates (Qo),three sediment levels(Hs),four types of structure,and a no-structure condition(reference test).The results indicated that the DBE structure with a 30°angle between the branches,a sedimentary dimensionless index of Hs/Do=4.59,and a flow dimensionless index of Qo=/√gD05=1:43(where g is the acceleration of gravity and Do is the diameter of the bottom outlet)lead to 10-fold increase in the sediment flushing cone dimensions and sediment removal efficiency compared to the results of the reference test.Finally,according to a statistical analysis of the results,a dimensionless equation for calculating the sediment flushing cone dimensions was developed for the tested sediment characteristics. 相似文献
6.
A geomechanical model can reveal the mechanical behavior of rocks and be used to manage the reservoir programs in a better mode. Fluid pressure will be reduced during hydrocarbon production from a reservoir. This reduction of pressure will increase the effective stress due to overburden sediments and will cause porous media compaction and surface subsidence. In some oil fields, the compacting reservoir can support oil and gas production. However, the phenomena can also cause the loss of wells and reduced production and also cause irreparable damage to the surface structures and affect the surrounding environment. For a detailed study of the geomechanical behavior of a hydrocarbon field, a 3D numerical model to describe the reservoir geomechanical characteristics is essential. During this study, using available data and information, a coupled fluid flow-geomechanic model of Fahlian reservoir formation in X-field in SW of Iran was constructed to estimate the amount of land subsidence. According to the prepared model, in this field, the maximum amount of the vertical stress is 110 MPa and the maximum amount of the horizontal stress is 94 MPa. At last, this model is used for the prediction of reservoir compaction and subsidence of the surface. The maximum value of estimated ground subsidence in the study equals to 29 mm. It is considered that according to the obtained values of horizontal and vertical movement in the wall of different wells, those movements are not problematic for casing and well production and also the surrounding environment. 相似文献
7.
8.
Image aliasing is a problem appearing as artefacts in digitally resampled images, which degrades the quality of the image. In digital rectification and texture mapping, pixels from an input image are transformed to pixels of an output image. The discrete nature of a digital image causes aliasing in the transformed image. In this paper the source of aliasing and the theory of antialiasing are described. The necessity of a precise filter design in antialiasing is discussed and a filter based on a Kaiser adjustable window is designed. Different practical antialiasing methods are described as well as interpolation methods, which are conventional in photogrammetry. Selected antialiasing methods are implemented and applied to a close range image. An objective analysis is carried out by applying inverse transformations to rectified images and deriving some measures to estimate the information loss for each method by comparing original and reconstructed images. Results indicate that interpolation methods are not capable of removing or reducing aliasing in highly decimating transformations. The output images of interpolation methods therefore suffer from edge corruption and interfusion of small features. Applying a Kaiser filter with a precise antialiasing method results in the least information loss and considerably reduces aliasing at the expense of higher computation load. 相似文献
9.
GPS Solutions - Computerized tomography provides valuable information for imaging the ionospheric electron density distribution. We use a wavelet neural network with a particle swarm optimization... 相似文献
10.
Prediction of global stability in room and pillar coal mines 总被引：1，自引：0，他引：1
Global stability is a necessary prerequisite for safe retreat mining and one of the crucial and complex problems in room and pillar mining, so its prediction plays an important role in the safety of retreat mining and the reduction of pillar failure risk. In this study, we have tried to develop predictive models for anticipating global stability. For this purpose, two of the most popular techniques, logistic regression analysis and fuzzy logic, were taken into account and a predictive model was constructed based on each. For training and testing of these models, a database including 80 retreat mining case histories from 18 room and pillar coal mines, located in West Virginia State, USA, was used. The models predict global stability based on the major contributing parameters of pillar stability. It was found that both models can be used to predict the global stability, but the comparison of two models, in terms of statistical performance indices, shows that the fuzzy logic model provides better results than the logistic regression. These models can be applied to identify the susceptibility of pillar failure in panels of coal mines, and this may help to reduce the casualties resulting from pillar instability. Finally, the sensitivity analysis was performed on database to determine the most important parameters on global stability. The results revealed that the pillar width is the most important parameter, whereas the depth of cover is the least important one. 相似文献