排序方式： 共有13条查询结果，搜索用时 31 毫秒
1.
Y.?BouhadadEmail author A.?Nour A.?Slimani N.?Laouami D.?Belhai 《Journal of Seismology》2004,8(4):497-506
A destructive earthquake of magnitude Mw = 6.8 hit the region of Boumerdes and Algiers (Algeria) on May 21, 2003. This is among the strongest seismic events of the mediterranean region and the most important event in the capital Algiers since 1716. It caused a widespread damage in the epicentral region, claimed 2271 human lives, injured 10000, about 20000 housing units affected and left about 160000 homeless. The main shock was felt about 250 km far from the epicenter and triggered sea waves of 1–3 m in amplitude in Balearic islands (Spain). Based on field observations and press report an intensity IX (MSK scale) is attributed to the epicentral area. The main shock was followed by many aftershocks among them several are of magnitude greater than 5.0, which added panic to inhabitants. The main shock triggered ground deformation, particularly liquefaction whose features are in different forms and sizes and caused damage and collapse of roads. The focal mechanism determined by worldwide institutions yield a pure reverse faulting with a compressional axis striking NE-SW. The epicenter is located offshore about 7 km from the Boumerdes-Dellys coast. Field observations show 0.7 m of coseismic uplift of shoreline between Boudouaou and Dellys. This uplift is about a half of the extracted coseismic slip from the seismic moment. On the other hand there is no clear surface break onshore, confirming hence, that the causative active fault is offshore. However, the rupture may propagate onshore to the SE near the Boudouaou region where ground cracks showing reverse faulting are observed a long a corridor of about 1 km wide. These fissures may correspond to a diffuse coseismic deformation. 相似文献
2.
During the May 21, 2003 M w 6.8 Boumerdes earthquake, in the “Cité des 102 Logements” built on a hilltop, in Corso, heavy damages were observed: near the crest, a four-story RC building collapsed while others experienced severe structural damage and far from the crest, slight damage was observed. In the present paper, we perform a 2D slope topography seismic analysis and investigate its effects on the response at the plateau as well as the correlation with the observed damage distribution. A site-specific seismic scenario is used involving seismological, geological, and geotechnical data. 2D finite element numerical seismic study of the idealized Corso site subjected to vertical SV wave propagation is carried out by the universal code FLUSH. The results highlighted the main factors that explain the causes of block collapse, located 8-26 m far from the crest. These are as follows: (i) a significant spatial variation of ground response along the plateau due to the topographic effect, (ii) this spatial variation presents high loss of coherence, (iii) the seismic ground responses (PGA and response spectra) reach their maxima, and (iv) the fundamental frequency of the collapsed blocks coincides with the frequency content of the topographic component. For distances far from the crest where slight damages were observed, the topographic contribution is found negligible. On the basis of these results, it is important to take into account the topographic effect and the induced spatial variability in the seismic design of structures sited near the crest of slope. 相似文献
3.
4.
The purpose of this study was to perform an experimental analysis of the amplitude of full‐scale spatial variability of seismic motions with regard to earthquake engineering. The LSST‐Lotung array in Taiwan provides a good set of records for this type of study. Of interest are the free‐field torsional seismic components induced by the spatial variability of seismic motions. In this study, three events have been considered: LSST‐06, LSST‐07 and LSST‐16. In time domain analysis, the experimental results obtained show that when the separation distance increases, the induced torsion decreases, and the normalized differential motion parameter increases. Also, the results show that the stronger the event, in terms of maximum PGA, the larger the induced torsional amplitude and the smaller the induced normalized differential motion parameter. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
5.
Building codes have widely considered the shear wave velocity to make a reliable subsoil seismic classification, based on the knowledge of the mechanical properties of material deposits down to bedrock. This approach has limitations because geophysical data are often very expensive to obtain. Recently, other alternatives have been proposed based on measurements of background noise and estimation of the H/V amplification curve. However, the use of this technique needs a regulatory framework before it can become a realistic site classification procedure. This paper proposes a new formulation for characterizing design sites in accordance with the Algerian seismic building code(RPA99/ver.2003), through transfer functions, by following a stochastic approach combined to a statistical study. For each soil type, the deterministic calculation of the average transfer function is performed over a wide sample of 1-D soil profiles, where the average shear wave(S-W) velocity, V s, in soil layers is simulated using random field theory. Average transfer functions are also used to calculate average site factors and normalized acceleration response spectra to highlight the amplification potential of each site type, since frequency content of the transfer function is significantly similar to that of the H/V amplification curve. Comparison is done with the RPA99/ver.2003 and Eurocode8(EC8) design response spectra, respectively. In the absence of geophysical data, the proposed classification approach together with micro-tremor measures can be used toward a better soil classification. 相似文献
6.
Nasser Laouami Mohamed Hadid Noureddine Mezouar 《Bulletin of Earthquake Engineering》2018,16(12):5843-5874
Nowadays, most of the site classifications schemes are based on the predominant period of the site as determined from the average horizontal to vertical spectral ratios of seismic motion or microtremor. However, the difficulty lies in the identification of the predominant period in particular if the observed average response spectral ratio does not present a clear peak but rather a broadband amplification or multiple peaks. In this work, based on the Eurocode-8 (2004) site classification, and assuming bounded random fields for both shear and compression waves-velocities, damping coefficient, natural period and depth of soil profile, one propose a new site-classification approach, based on “target” simulated average \( H/V \) spectral ratios, defined for each soil class. Taking advantage of the relationship of Kawase et al. (Bull Seismol Soc Am 101:2001–2014, 2011), which link the \( H/V \) spectral ratio to the horizontal (\( HTF \)) over the vertical (\( VTF \)) transfer functions, statistics of \( H/V \) spectral ratio via deterministic visco-elastic seismic analysis using the wave propagation theory are computed for the 4 soil classes. The obtained results show that \( H/V \) and \( HTF \) have amplitudes and shapes remarkably different among the four soil classes and exhibit fundamental peaks in the period ranges remarkably similar. Moreover, the “target” simulated average \( H/V \) spectral ratios for the 4 soil classes are in good agreement with the experimental ones obtained by Zhao et al. (Bull Seismol Soc Am 96:914–925, 2006) from the abundant and reliable Japanese strong motions database Kik-net, Ghasemi et al. (Soil Dyn Earthq Eng 29:121–132, 2009) from the Iranian strong motion data, and Di Alessandro et al. (Bull Sesismol Soc Am 106:2, 2011. https://doi.org/10.1785/0120110084) from the Italian strong motion data. In addition to the 4 EC-8 standard soil classes (A, B, C and D), the superposition of the 4 target \( H/V \) reveals 3 new boundary site classes; AB, BC and CD, for overlapping \( V_{s,30} \) ranges when the predominant peak is not clearly consistent with any of the 4 proposed classes. Finally, one proposes a site classification index based on the ratio between the cross-correlation and the mean quadratic error between the in situ \( H/V \) spectral ratio and the “target” one. In order to test the reliability of the proposed approach, data from 139 sites were used, 132 collected from the Kik-net network database from Japan and 7 from Algeria. The site classification success rate per site class are around 93, 82, 89 and 100% for rock, hard soil, medium soil and soft soil, respectively. Zhao et al. (2006) found an average success for the 4 classes of soil close to 60%, similar to what one found in the present study (63%) without considering the new soil classes, but much smaller if one considers them (86%). In the absence of \( V_{s,30} \) data, the proposed approach can be an alternative to site classification. 相似文献
7.
This paper deals with the probabilistic seismic hazard analysis carried out in the Oran region, situated in the Northwest of Algeria. This part of Algeriawas historically struck by strong earthquakes. It was particularly affected during theOctober 9, 1790 Oran earthquake of intensity X. The main purpose of this work is to assessseismic hazard on rocks in order to provide engineers and planners with a basic tool for seismicrisk mitigation. The probabilistic approach is used in order to take into account uncertaintiesin seismic hazard assessment. Seismic sources are defined in the light of the most recentresults obtained from seismotectonics analyses carried out in North Algeria.Source parameters such as b-values, slip rate and maximum magnitude are assessed for eachseismic source. The attenuation of ground shaking motion with distance is estimated byusing attenuation relationships developed elsewhere throughout the world (Sadigh et al., 1993; Ambraseys and Bommer, 1991). The two relationships agree well with the local data. Differentchoices of source parameter values and attenuation relationships are assigned weights in alogic tree model. Results are presented as relationships between values of peak groundacceleration (PGA) and annual frequency of exceedance, and maps of hazard for returnperiods of 200 years and 500 years. A maximum peak ground acceleration of 0.42 g is obtainedfor the Oran site for a return period of 500 years. 相似文献
8.
Foundation settlement statistics via finite element analysis 总被引：5，自引：0，他引：5
The dispersion observed in soil data comes both from the spatial variability which greatly influences the behavior of large structures and from errors in testing. Thus, the geotechnical engineering deals with uncertainties for which deterministic approaches are not suitable. The resort to probabilistic techniques, enables modeling uncertainties by analyzing their dispersion effect on the global behavior of the structure. The scope of this paper is analyzing settlement and differential settlement variability of a pair of foundations on random heterogeneous medium. The random soil properties of interest are the elastic modulus, and the Poisson ratio. The elastic modulus is modeled as a spatially random field by adopting the lognormal distribution, which enables analyzing its large variability. Because soil Poisson ratio is bounded in practice between two extreme values, its random field is obtained by using the Beta distribution. In this study, one proposes for the Beta field determination, a mapping technique on the probability distribution function diagram, by solving a non-linear equation. However, the mean and variance are unchanged through the mapping operation. Because the soil Poisson ratio is a positive parameter, one prefers to perform the mapping operation with the probability function of the lognormal distribution. Also, the proposed technique can be used for other bounded soil properties such as the porosity. In this paper, settlement and differential settlement statistics prediction are carried out using Monte Carlo simulations combined with deterministic finite element method (DFEM). A performed parametric study shows the following: (i) as the variability of the elastic modulus increases as settlement and differential settlement statistics are important, also, settlement statistics decreases as the Poisson ratio variability increases, and differential settlement statistics do not seem be affected by its variability. (ii) settlement and differential settlement statistics are important for positive inter-property correlation. (iii) a great influence of the correlation lengths on settlement and differential settlement statistics. 相似文献
9.
Nasser Laouami Abdennasser Slimani Youcef Bouhadad Jean-Luc Chatelain Ali Nour 《Soil Dynamics and Earthquake Engineering》2006,26(11):991-1003
The Algiers–Boumerdes region has been struck by a destructive magnitude 6.8 (Mw) earthquake on May 21, 2003. The study presented in this paper is based on main shock strong motions from 13 stations of the Algerian accelerograph network. A maximum 0.58g peak ground acceleration (PGA) has been recorded at 20 km from the epicenter, only about 150 m away from a PGA of 0.34g, with both a central frequency around 5 Hz, explained by a strong very localized site effect, confirmed by receiver function technique results showing peaks at 5 Hz with amplitudes changing by a factor of 2. Soil amplifications are also evidenced at stations located in the quaternary Mitidja basin, explaining the higher PGA values recorded at these stations than at stations located on firm soil at similar distances from the epicenter. A fault-related directionality effect observed on the strong motion records and confirmed by the study of the seismic movement anisotropy, in agreement with the N65 fault plan direction, explains the SW–NE orientation of the main damage zone. In the near field, strong motions present a high-frequency content starting at 3 Hz with a central frequency around 8 Hz, while in the far field their central frequency is around 3 Hz, explaining the high level of damage in the 3- to 4-story buildings in the epicentral zone. The design spectra overestimate the recorded mean response spectra, and its high corner frequency is less than the recorded one, leading to a re-examination of the seismic design code that should definitively integrate site-related coefficient, to account for the up to now neglected site amplification, as well as a re-modeling of the actual design spectra. Finally, both the proposed Algerian attenuation law and the worldwide laws usually used in Algeria underestimate the recorded accelerations of the 6.8 (Mw) Boumerdes earthquake, clearly showing that it is not possible to extrapolate the proposed Algerian law to major earthquakes. 相似文献
10.
A shallow moderate (M
s=5.7) but damaging earthquake shook theregion of Beni-Ourtilane located about 50 km NW of Setif and 390 kmNE of Algiers (Central Eastern Algeria). The main shock caused the deathof 2 peoples, injured 50 and caused sustainable damage to about 3000housing units. The main shock was preceded by 2 foreshocks and followedby many aftershocks which lasted for many days. Analysis of historicalseismicity including the localisation of epicenters, the trend of isoseismalmaps of some historical events, the localisation of the November 10, 2000main shock (M
s=5.7) and the November 16, 2000 aftershock(M
s=4.5) as well as the shape of the area of maximum intensity ofthe November 10, 2000 earthquake suggest that the Tachaouaft fault of20 km of length is the activated geological structure. Although, there isno clear surface breaks associated with this earthquake, the localisation ofgeological disorders, such as ground fissures, during the Beni-Ourtilaneearthquake, which are remarkably located near the fault, may have atectonic meaning. Geomorphological analysis through Digital ElevationModels (DEMs) allowed us to identify a clear fault scarp related likely tostrong earthquakes occurred in the past. Among geomorphologicalevidences of this active fault there are the uplift and tilt of alluvial terraceson the hanging wall and the diversion of the drainage pattern. Based onthe quality of constructions and field observations an intensity I
0 = VII (MSK scale) is attributed to the epicentral area,which is striking NE-SW in agreement with the focal mechanism solutionand the seismotectonic observations. In the other hand the amount ofdamage is due rather to the bad quality of constructions than to theseverity of ground motion. The Tachaouaft fault with the Kherrata fault isthe main source of seismic hazard in the Babors region. 相似文献