排序方式： 共有6条查询结果，搜索用时 171 毫秒
1
1.
Jean-Philippe Montillet Lukasz K. Bonenberg Craig M. Hancock Gethin W. Roberts 《GPS Solutions》2014,18(2):273-282
This work focuses on the performances of Locata technology in single point positioning using different firmware versions (v2.0 and v4.2). The main difference is that the Locata transmitters with firmware v2.0 are single frequency, whereas in the v4.2, they are dual frequency. The performance of the different firmware versions has been measured in different environments including an urban canyon-like environment and a more open environment on the roof of the Nottingham Geospatial Building. The results obtained with firmware v4.2 show that with more available signals, cycle slips can be more easily detected, together with the improvement of the detection of multipath fading on the received signal. As a result, the noise level on the carrier phase measurements recorded with firmware v4.2 is equal on average to a third of the level of noise on the measurements recorded with firmware v2.0. In addition, with either firmware, the accuracy of the position is at the sub-centimeter level on the East and North coordinates. The Up coordinate accuracy is generally less accurate and more sensitive to the geometry of the network in our experiments. We then show the importance of the geometry of the Locata network on the accuracy of Locata positioning system through the demonstration of the relationship between the dilution of precision value and the confidence ellipse. We also demonstrate that the model of the noise on the Locata coordinates is a white Gaussian noise with the help of the autocorrelation function. To some extent, this technique can help to detect whether the Wi-Fi technology is interfering with the Locata technology and degrades the positioning accuracy. 相似文献
2.
Locating the seismic event hypocenter is the very first issue undertaken when studying any seismological problem. Thus, the accuracy of the obtained solution can significantly influence consecutive stages of an analysis, so there is a continuous demand for new, more efficient, and accurate location algorithms. It is well recognized that there exists no single universal location algorithm which performs equally well in all situations. Seismic activity and its spatial variability over time, seismic network geometry, and the controlled area’s geological complexity are factors influencing the performance of location algorithms. For example, in the case of mining applications, the planarity of the seismic network usually operated at the exploitation level becomes an important issue limiting the accuracy of location of the hypocenter depths. In this paper, we push forward the discussion on the performance of the newly proposed location algorithm called the extended double difference (EDD), concentrating on the reliability of source depth estimation for mining-induced seismic events. We demonstrate that the EDD algorithm very efficiently uses information originating from the nonplanarity of the seismic network, improving the hypocenter depth estimates with respect to the classical double difference technique. Methodological considerations are illustrated by real data analysis of selected events from the Rudna copper mine (Poland). 相似文献
3.
Julie A. Winkler Suzanne Thornsbury Marco Artavia Frank-M. Chmielewski Dieter Kirschke Sangjun Lee Malgorzata Liszewska Scott Loveridge Pang-Ning Tan Sharon Zhong Jeffrey A. Andresen J. Roy Black Robert Kurlus Denys Nizalov Nicole Olynk Zbigniew Ustrnul Costanza Zavalloni Jeanne M. Bisanz Géza Bujdosó Lesley Fusina Yvonne Henniges Peter Hilsendegen Katarzyna Lar Lukasz Malarzewski Thordis Moeller Roman Murmylo Tadeusz Niedzwiedz Olena Nizalova Haryono Prawiranata Nikki Rothwell Jenni van Ravensway Harald von Witzke Mollie Woods 《Climatic change》2010,103(3-4):445-470
A conceptual framework for climate change assessments of international market systems that involve long-term investments is proposed. The framework is a hybrid of dynamic and static modeling. Dynamic modeling is used for those system components for which temporally continuous modeling is possible, while fixed time slices are used for other system components where it can be assumed that underlying assumptions are held constant within the time slices but allowed to vary between slices. An important component of the framework is the assessment of the “metauncertainty” arising from the structural uncertainties of a linked sequence of climate, production, trade and decision-making models. The impetus for proposing the framework is the paucity of industry-wide assessments for market systems with multiple production regions and long-term capital investments that are vulnerable to climate variations and change, especially climate extremes. The proposed framework is pragmatic, eschewing the ideal for the tractable. Even so, numerous implementation challenges are expected, which are illustrated using an example industry. The conceptual framework is offered as a starting point for further discussions of strategies and approaches for climate change impact, vulnerability and adaptation assessments for international market systems. 相似文献
4.
Jan D. Miller Chen-Luh Lin Lukasz Hupka Mohamed I. Al-Wakeel 《International Journal of Mineral Processing》2009,93(1):48-53
Procedures for 3D mineral liberation analysis by X-ray micro CT (XMT) are presented and discussed including the construction of liberation-limited grade/recovery curves for specific feed materials. In this way, actual separation efficiencies can be compared to what might be expected for a perfect separation limited only by the extent of liberation. It is shown that 3D mineral liberation analysis based on XMT is preferred to 2D section analysis which overestimates the extent of liberation. By way of example, procedures and experimental results are presented and discussed for feed material in the case of phosphate rock flotation. 相似文献
5.
Joanna Paldyna Beata Krasnodebska-Ostrega Karolina Kregielewska Joanna Kowalska Lukasz Jedynak Jerzy Golimowski Tomasz Grobelski Jadwiga Farbiszewska-Kiczma Teresa Farbiszewska 《Environmental Earth Sciences》2013,68(2):439-450
Stored metallurgy and mining wastes contain relatively high amounts of potentially toxic elements. To monitor the distribution of contaminants originating from dumps, the chemical and physical properties of the wastes must be characterised. In this study, the chemical properties of wastes deposited in two different locations in Southern Poland (Szklary and Zloty Stok) were evaluated. Heaps located in Zloty Stok contain wastes from gold mineralisation comprising arsenic while wastes in Szklary originate from a factory that produced an iron-nickel alloy. In Szklary the total concentrations of Ca, Mg, Fe, Zn, Mn, Cr, Co, Cu, Ni, Tl, Ag, Cd and Pb were determined, while in Zloty Stok also As is an important contaminant. To assess the risk of contamination of the surrounding environment and to select the proper method for removing the contaminants, information on the distribution of elements between operationally defined phases must be obtained. For this purpose, a six-step sequential extraction was used. The mobility of most elements in the wastes from Szklary and Zloty Stok was relatively low; however, the large amount of As, 40–180 mg L?1, that could be released to environment in case of Zloty Stok was high. The results of fractionation studies indicated that Ag, Cd, Tl, Co, Cu, Cr, Pb, Zn and Mn may be released into environment under low pH and low redox potential conditions, which can be induced by bacterial activity. 相似文献
6.
Kristin Stock Vera Karasova Anne Robertson Guillaume Roger Mark Small Mohamed Bishr Jens Ortmann Tim Stojanovic Femke Reitsma Lukasz Korczynski Boyan Brodaric Zoe Gardner 《Transactions in GIS》2013,17(4):612-639
Current approaches to the discovery of scientific resources (publications, data sets and web services) are dominated by keyword search. These approaches do not allow scientists to search on the deeper semantics of scientific resources, or to discover resources on the basis of the scientific approaches taken. This article evaluates a user interface that allows users to discover scientific resources through structured knowledge in the form of ontologies describing the domain and the scientific knowledge inherent within the scientific resource, and also through informal user tags. These combined capabilities provide scientists with new and powerful options for resource discovery. A qualitative user evaluation explored how scientists felt about the approach for resource discovery in the context of their scientific work. The study showed that marine scientists were enthusiastic about the capabilities of such an approach and appreciated the ability to browse the visual structure of the knowledge and query on scientific method but, overall, preferred the use of tags over ontologies. The exploratory nature of the user study was used to identify future directions for such improvements. 相似文献
1