Deep-water sediment transport patterns and basin floor topography in early rift basins: Plio-Pleistocene syn-rift of the Corinth Rift,Greece     

Martin Muravchik  Gijs A. Henstra  Gauti T. Eliassen  Rob L. Gawthorpe  Mike Leeder  Haralambos Kranis  Emmanuel Skourtsos  Julian Andrews 《Basin Research》2020,32(5):1184-1212

Our current understanding on sedimentary deep-water environments is mainly built of information obtained from tectonic settings such as passive margins and foreland basins. More observations from extensional settings are particularly needed in order to better constrain the role of active tectonics in controlling sediment pathways, depositional style and stratigraphic stacking patterns. This study focuses on the evolution of a Plio-Pleistocene deep-water sedimentary system (Rethi-Dendro Formation) and its relation to structural activity in the Amphithea fault block in the Corinth Rift, Greece. The Corinth Rift is an active extensional basin in the early stages of rift evolution, providing perfect opportunities for the study of early deep-water syn-rift deposits that are usually eroded from the rift shoulders due to erosion in mature basins like the Red Sea, North Sea and the Atlantic rifted margin. The depocentre is located at the exit of a structurally controlled sediment fairway, approximately 15 km from its main sediment source and 12 km basinwards from the basin margin coastline. Fieldwork, augmented by digital outcrop techniques (LiDAR and photogrammetry) and clast-count compositional analysis allowed identification of 16 stratigraphic units that are grouped into six types of depositional elements: A—mudstone-dominated sheets, B—conglomerate-dominated lobes, C—conglomerate channel belts and sandstone sheets, D—sandstone channel belts, E—sandstone-dominated broad shallow lobes, F—sandstone-dominated sheets with broad shallow channels. The formation represents an axial system sourced by a hinterland-fed Mavro delta, with minor contributions from a transverse system of conglomerate-dominated lobes sourced from intrabasinal highs. The results of clast compositional analysis enable precise attribution for the different sediment sources to the deep-water system and their link to other stratigraphic units in the area. Structures in the Amphithea fault block played a major role in controlling the location and orientation of sedimentary systems by modifying basin-floor gradients due to a combination of hangingwall tilt, displacement of faults internal to the depocentre and folding on top of blind growing faults. Fault activity also promoted large-scale subaqueous landslides and eventual uplift of the whole fault block.  相似文献   

A Unified Model for Black Hole X-Ray Binary Jets?     

Rob Fender  Tomaso Belloni  Elena Gallo 《Astrophysics and Space Science》2005,300(1-3):1-13

We have recently put forward a ‘unified’ semi-empirical model for the coupling between accretion and jet production in galactic black hole X-ray binaries. In this paper, we summarise this model and briefly discuss relevant considerations that have arisen since its publication.  相似文献   

Circularly polarised radio emission from GRS 1915+105 and other X-ray binaries     

Rob Fender 《Astrophysics and Space Science》2003,288(1-2):79-95

I report the detection of circular polarisation, associated with relativistic ejections, from the `microquasar' GRS 1915+105. I further compare detections and limits of circular polarisation and circular-to-linear polarisation ratios in other X-ray binaries. Since in at least two cases the dominance of linear over circular polarisation or vice versa is a function of frequency, this seems to indicate that this is a strong function of depolarisation in the source. Furthermore, I note that circular polarisation has only been detected from sources whose jets lie close to the plane of the sky, where as we have quite stringent limits on the circular polarisation of jets which lie close to the line of sight.  相似文献   

A consistent geochemical modelling approach for the leaching and reactive transport of major and trace elements in MSWI bottom ash     

Joris J. Dijkstra  Johannes C.L. Meeussen  Hans A. Van der Sloot  Rob N.J. Comans 《Applied Geochemistry》2008

  相似文献   

Implementing low-cost landslide risk reduction: a pilot study in unplanned housing areas of the Caribbean     

Malcolm Anderson  Liz Holcombe  Rob Flory  Jean-Philippe Renaud 《Natural Hazards》2008,47(3):297-315

Landslides pose a serious physical and environmental threat to vulnerable communities living in areas of unplanned housing on steep slopes in the Caribbean. Some of these communities have, in the past, had to be relocated, at costs of millions of dollars, because of major slides triggered by tropical storm rainfall. Even so, evidence shows that: (1) risk reduction is a marginal activity; (2) there has been minimal uptake of hazard maps and vulnerability assessments and (3) there is little on-the-ground delivery of construction for risk reduction. This article directly addresses these issues by developing a low-cost approach to the identification of the potential pore pressure changes that trigger such slides we seek to address these three commentaries directly. A complex 45–60° slope site in St Lucia, West Indies was selected as a pilot for a modelling approach that uses numerical models (FLAC and CHASM) to verify the need for surface water management to effectively reduce landslide risk. Following the model confirmation, a series of drains were designed and constructed at the site. Post-construction evidence indicates the methodology to be sound, in that the site was stable in subsequent 1-in-1 to 1-in-4 year rainfall events. A critical feature of the approach is that it is community-based from data acquisition through to community members participating in construction.  相似文献   

Distribution of trace and major elements in sediment and pore waters of the Lena Delta and Laptev Sea   总被引：1，自引：0，他引：1  

Rob F. Nolting  Maarten van Dalen  Willem Helder 《Marine Chemistry》1996,53(3-4)

Sediment cores collected during the SPASIBA expedition in 1991 were analysed for their trace- and major element concentrations. Leachable (0.1 N HCl) as well as residual concentrations were determined. Fe and Mn were measured in the interstitial waters to characterize redox conditions. Lateral distribution patterns of solid phase Cu, Cd, Ni, Pb and Zn show a small increase in concentration from the Lena Delta in seaward direction. In general concentrations of these metals are very low and similar to natural background values. With some exceptions, solid phase profiles with depth of all investigated elements do not show strong variations. No enrichment of Pb and Zn in surface layers was found. Remobilization processes and transport of particles enriched in Mn are responsible for Mn accumulation in a particular area. Pore-water concentrations of dissolved Mn in the latter sediments are very high (> 700 μM) and suggest strong Mn reduction directly below the sediment-water interface. In contrast to Mn, the depth profiles of Cd show a surface layer with lower concentrations and an increase deeper down the sediment. The C/N ratio in the sediment decreases from 13 in the Lena mouth to 9 in the more marine part of the Laptev Sea. Surface sediments in the Laptev Sea are very uniform and homogeneous and show only small concentration gradients.  相似文献   

Population dynamics of two marine polychaetes: the relative role of density dependence, predation, and winter conditions     

van der Meer  Jaap; Beukema  Jan J; Dekker  Rob 《ICES Journal of Marine Science》2000,57(5):1488-1494

  相似文献   

The microbiological formation of carbonate concretions in the Upper Lias of NE England     

R. Raiswell 《Chemical Geology》1976,18(3):227-244

Carbonate concretions from the Jet Rock (Upper Lias, Lower Jurassic) of NE England grew in uncompacted sediment, close to the sediment surface. Microbiological activity created isolated microenvironments in which dissolved carbonate and sulphide species were produced more rapidly than they could be dispersed by diffusion, so establishing the localised supersaturation of calcite and metastable iron sulphides. Precipitation of these minerals in the microenvironment formed a single concretion.Mass-balance calculations demonstrate that at least two different microbiological processes participated in concretionary growth. The early growth stages had an unidentifiable microbiological source of carbonate which declined in importance relative to sulphate reduction as growth proceeded. It is suggested that the diffusion of dissolved organic material was important in sustaining microbiological activity.Mineralogical zonations in the concretions result from changes in the chemistry of the microenvironment due to variations in the rates of addition/removal Ca²⁺, Fe²⁺, HCO^?₃ and HS^? by microbiological activity, the crystallization of authigenic minerals and diffusion between the microenvironment and surrounding pore waters. Such changes are of only local significance and the resulting mineralogical zonations in a concretion cannot be used to deduce successive stages of diagenesis in the whole sediment.  相似文献   

Subsidence in the super-deep Pattani and Malay basins of Southeast Asia: a coupled model incorporating lower-crustal flow in response to post-rift sediment loading   总被引：8，自引：0，他引：8  

Christopher K. Morley  Rob Westaway†‡ 《Basin Research》2006,18(1):51-84

Two Early Cenozoic rifts in Southeast Asia (beneath the Pattani and Malay basins) experienced only limited upper-crustal extension (β≤1.5); yet very thick post-rift sequences are present, with 6–12 km of Late Cenozoic terrestrial and shallow-marine sediment derived from adjacent sources. Conventional post-rift backstripping requires depth-dependent lithospheric thinning by β=2–4 to explain these tremendous thicknesses. We assess an alternative explanation for this post-rift subsidence, involving lower-crustal flow from beneath these basins in response to lateral pressure-gradients induced by the sediment loads and the negative loads arising from the erosion of their sediment sources. We calculate that increased rates of erosion in western Thailand in the Early Miocene placed the crust in a non-steady thermal state, such that the depth (and thus, the pressure) at the base of the brittle upper crust subsequently varied over time. Following such a perturbation, thermal and mass-flux steady-state conditions took millions of years to re-establish. In the meantime, the lateral pressure-gradient caused net outflow of lower crust, thinning the crust beneath the depocentre by several kilometres (mimicking the isostatic effect of greater crustal extension having occurred beforehand) and thickening it beneath the sediment source region. The local combination of hot crust and high rates of surface processes, causing lower-crustal flow to be particularly vigorous and thus making its effects more readily identifiable, means that the Pattani and Malay basins represent a set of conditions different from basins in many other regions. However, lower-crustal flow induced by surface processes will also occur to some extent, but less recognisably, in many other continental crustal provinces, but its effects may be mistaken for those of other processes, such as larger-magnitude stretching and/or depth-dependent stretching.  相似文献   

Isotopic constraints on growth conditions of multiphase calcite–pyrite–barite concretions in Carboniferous mudstones     

R. Raiswell  S. H. Bottrell  S. P. Dean  J. D. Marshall†  A. Carr‡  & D. Hatfield 《Sedimentology》2002,49(2):237-254

Carbonate concretions in the Lower Carboniferous Caton Shale Formation contain diagenetic pyrite, calcite and barite in the concretion matrix or in different generations of septarian fissures. Pyrite was formed by sulphate reduction throughout the sediment before concretionary growth, then continued to form mainly in the concretion centres. The septarian calcites show a continuous isotopic trend from δ¹³C=?28·7‰ PDB and δ¹⁸O=?1·6‰ PDB through to δ¹³C=?6·9‰ PDB and δ¹⁸O=?14·6‰ PDB. This trend arises from (1) a carbonate source initially from sulphate reduction, to which was added increasing contributions of methanogenic carbonate; and (2) burial/temperature effects or the addition of isotopically light oxygen from meteoric water. The concretionary matrix carbonates must have at least partially predated the earliest septarian cements, and thus used the same carbonate sources. Consequently, their isotopic composition (δ¹³C=?12·0 to ?10·1‰ PDB and δ¹⁸O=?5·7 to ?5·6‰ PDB) can only result from mixing a carbonate cement derived from sulphate reduction with cements containing increasing proportions of carbonate from methanogenesis and, directly or indirectly, also from skeletal carbonate. Concretionary growth was therefore pervasive, with cements being added progressively throughout the concretion body during growth. The concretions contain barite in the concretion matrix and in septarian fissures. Barite in the earlier matrix phase has an isotopic composition (δ³⁴S=+24·8‰ CDT and δ¹⁸O=+16·4‰ SMOW), indicating formation from near‐surface, sulphate‐depleted porewaters. Barites in the later septarian phase have unusual isotopic compositions (δ³⁴S=+6 to +11‰ CDT and δ¹⁸O=+8 to +11‰ SMOW), which require the late addition of isotopically light sulphate to the porewaters, either from anoxic sulphide oxidation (using ferric iron) or from sulphate dissolved in meteoric water. Carbon isotope and biomarker data indicate that oil trapped within septarian fissures was derived from the maturation of kerogen in the enclosing sediments.  相似文献