排序方式： 共有8条查询结果，搜索用时 15 毫秒
1
1.
2.
Crack-related fabric analyses were carried out in terms of crack tensors using Inada granite deformed inelastically in a triaxial vessel up to post-failure, focusing on the fabric changes during brittle failure. Complementarily, numerical simulation tests were conducted to determine the representative volume element (RVE) required for crack surveying. Numerical simulation tests show that the window size for crack surveying should be at least six times the mean trace length in order to obtain a statistically meaningful crack tensor. A larger window is needed to estimate the distribution of crack radii. In quartz, cracks grow preferentially parallel to the major loading axis. Crack tensors in quartz can provide a measure of damage reflecting inelastic deformation under differential stress in past geological events. During the first stage of inelastic deformation, the number density of cracks decreases with a rather sharp increase in crack diameters. This happens because pre-existing cracks in intact rock join together to make longer cracks. However, the density remains almost constant during the second stage of loading from 90% to 100% of the peak stress. The crack diameter gradually increases due to the stable propagation of cracks. When granite is further deformed beyond the peak stress, the number density decreases again while sharp increases in crack diameters appear as a result of the forking and coalescence of cracks. It is also suggested that load-normal grain boundary cracks are generated as a result of the rolling and sliding of disintegrated blocks in the post-failure stage. 相似文献
3.
Tae-Soo Pyo Masahiko Hayashi Naoto Kobayashi Alan T. Tokunaga Hiroshi Terada Miwa Goto Takuya Yamashita Yoichi Itoh Hideki Takami Naruhisa Takato Yutaka Hayano Wolfgang Gaessler Yukiko Kamata Yosuke Minowa Masanori Iye 《Astrophysics and Space Science》2003,287(1-4):21-24
We present high angular resolution spectra taken along the jets from L1551 IRS 5 and DG Tau obtained with the Subaru Telescope. The position-velocity diagrams of the [Fe II] λ 1.644 μmemission line revealed remarkably similar characteristics for the two sources, showing two distinct velocity components separated from each other in both velocity and space with the entire emission range blueshifted with respect to the stellar velocity. The high velocity component (HVC) has a velocity of –200 ––300 km s-1 with a narrow line width, while the low velocity component (LVC) is around –100 km s-1 exhibitinig a broad line width. The HVC is located farther away from the origin and is more extended than the LVC. Our results suggest that the HVC is a well-collimated jet originating from the region close to the star, while the LVC is a widely-opened wind accelerated in the region near the inner edge of the accretion disk. 相似文献
4.
Masato Ueshima Takato Takemura Takeshi Saito Yoshiharu Ito Shoichiro Hamamoto Hirotaka Saito Toshiko Komatsu 《Environmental Earth Sciences》2017,76(18):633
Underground developments such as subways and shopping facilities have been increasing in number and magnitude in the relatively shallow subsurface of many urban areas where the earth materials commonly are composed of marine sediments. Marine sediments can contain significant amounts of toxic trace elements such as arsenic, boron, and lead. Changes in the subsurface environment caused by excavation and construction in underground developments could potentially cause these toxic elements to be dissolved into pore water of the sediments, which might lead to groundwater pollution. The purpose of this study is to investigate correlations among chemical properties of marine sediments, such as pH and electrical conductivity (EC), concentrations of toxic trace elements, and stratigraphic characteristics of the sediments. We selected three sites with different stratigraphic settings in the southern Kanto Plain around the Tokyo Metropolis. We collected core samples from shallow strata at a site in the Arakawa Lowland, southern Saitama, and at two sites in the Musashino Upland, Middle Tokyo. All sites have both marine and non-marine sediments up to 50–60 m in thickness. We determined trace element concentrations in the pore water, pH, EC, and loss on ignition. The results show that (1) the marine sediments tend to have low pH, high EC, and high sulfur concentration compared to the non-marine sediments (2) the concentration of most of the soluble heavy metals vary depending on the concentration of sulfate, the pH, and the formation processes of the strata, (3) the arsenic concentration is not related to sulfur concentration but apparently to Fe and Al concentrations, (4) the boron concentration is not related to any other properties implying that the boron level is independent of and cannot be predicted by common chemical properties, and (5) for all three sites, concentrations of most of the trace elements, EC, pH, and sulfate concentration were correlated with each other. This study shows that the concentration and potential mobilization of many toxic trace elements in marine sediments could be predicted by easily measurable pore water chemical properties such as pH and EC. This could be useful for predicting and avoiding the risk of groundwater pollution during underground development projects. 相似文献
5.
Takato Naruhisa Fuse Tetsuharu Gaessler Wolfgang Goto Miwa Kanzawa Tomio Kobayashi Naoto Minowa Yosuke Oya Shin Pyo Tae-Soo Saint-Jacque D. Takami Hideki Terada Hiroshi Hayano Yutaka Iye Masanori Kamata Yukiko Tokunaga A. T. 《Earth, Moon, and Planets》2003,92(1-4):183-191
We have measured near-infrared colorsof the binary Kuiper Belt object (KBO)1998 WW31 using the Subaru Telescope withadaptive optics. The satellite was detectednear its perigee and apogee(0.18“ and 1.2” apart from the primary).The primary and the satellite have similar H–Kcolors, while the satellite is redder thanthe primary in J–H. Combined with the Rband magnitude previously published byVeillet et al., 2002, the color of the primaryis consistent with that of optically red KBOs. Thesatellite's R-, J-, H-colors suggest thepresence of ～1 μm absorption band dueto rock-forming minerals. If the surface of thesatellite is mainly composed by olivine, thesatellite's albedo is higher value than the canonicallyassumed value of 4%. 相似文献
6.
7.
Peng K. Hong Seiji Sugita Yasuhito Sekine Naruhisa Takatoh Tetsuharu Fuse Hideyo Kawakita Eliot F. Young Kosuke Kurosawa Junichi Haruyama Toshihiko Kadono Shunichi Kamata Tomohiko Sekiguchi Hirotomo Noda 《Icarus》2011,214(1):21-29
The Lunar Crater Observation and Sensing Satellite (LCROSS) mission was an impact exploration searching for a volatile deposit in a permanently shadowed region (PSR) by excavating near-surface material. We conducted infrared spectral and imaging observations of the LCROSS impacts from 15 min before the first collision through 2 min after the second collision using the Subaru Telescope in order to measure ejecta dust and water. Such a ground-based observation is important because the viewing geometry and wavelength coverage are very different from the LCROSS spacecraft. We used the Echelle spectrograph with spectral resolution λ/Δλ ∼ 10,000 to observe the non-resonant H2O rotational emission lines near 2.9 μm and the slit viewer with a K′ filter for imaging observation of ejecta plumes. Pre-impact calculations using a homogeneous projectile predicted that 2000 kg of ejecta and 10 kg of H2O were excavated and thrown into the analyzed area immediately above the slit within the field of view (FOV) of the K′ imager and the FOV of spectrometer slit, respectively. However, no unambiguous emission line of H2O or dust was detected. The estimated upper limits of the amount of dust and H2O from the main Centaur impact were 800 kg and 40 kg for the 3σ of noise in the analyzed area within the imager FOV and in the slit FOV, respectively. If we take 1σ as detection limit, the upper limits are 300 kg and 14 kg, respectively. Although the upper limit for water mass is comparable to a prediction by a standard theoretical prediction, that for dust mass is significantly smaller than that predicted by a standard impact theory. This discrepancy in ejecta dust mass between a theoretical prediction and our observation result suggests that the cratering process induced by the LCROSS impacts may have been substantially different from the standard cratering theory, possibly because of its hollow projectile structure. 相似文献
8.
Naruhisa?Toya Masao?BanEmail author Ryuichi?Shinjo 《Contributions to Mineralogy and Petrology》2005,148(5):566-581
The Aoso volcano is a member of the newly defined volcanic front of Northeast Japan, characterized by the occurrence of low-K and hornblende andesites. Its activity can be divided into three stages: the early, caldera-forming, and late stages. While petrographic and geochemical data show all products underwent magma mixing or co-mingling, Sr and Nd isotopic ratios indicate that all are consanguineous. The end-member magmas are basaltic and andesitic in the early stage, but basaltic and dacitic in the late stage. In the caldera-forming stage, hornblende-free and hornblende-rich andesites co-mingled, which triggered an explosive eruption leading to caldera formation. Hornblende occurs also in the dacite from the early part of the late stage. These hornblende andesites and dacites are lower in magmatic temperature compared to hornblende-free andesites. The estimated basaltic end-member is low-K and high in magmatic temperature, and can be derived by a high degree of partial melting of mantle under the volcanic front. The estimated andesitic and dacitic end-members cannot be derived from the basaltic end-member magma through fractional crystallization, but can be derived from partial re-melting of the solidified low-K basalt, leaving amphibolitic and gabbroic residues, respectively. 相似文献
1