Nonlinear impact monitoring: line of variation searches for impactors     

Andrea Milani  Steven R. Chesley  Giacomo Tommei 《Icarus》2005,173(2):362-384

  相似文献   

A new methodology developed by cetena to assess the seakeeping behaviour of marine vessels     

B. Chil  G. Sartori  R. Santos 《Ocean Engineering》1986,13(3)

The paper describes an analytical method to determine an operability index for a marine vehicle when its geometric characteristics, the geographical area in which the vessel is supposed to operate, and the limiting criteria for operations are known. The computer program based on strip theory provides reliable results not only for conventional hullforms, but also for catamarans, offshore vehicles, etc. The results are presented in the form of figures for different vessels, namely, crane barge, naval vessels and SWATH type catamarans. The authors are of the opinion that the proposed method would provide the designer with a valid tool to improve the seakeeping qualities of a vessel, while taking into account the limiting conditions imposed due to seaway operations.  相似文献   

Modeling of the Guagua Pichincha volcano (Ecuador) lahars     

Paolo Canuti  Nicola Casagli  Filippo Catani  Giacomo Falorni 《Physics and Chemistry of the Earth》2002,27(36):1587-1599

Lahars, here defined as debris flows of volcanic origin, are rapid mass movements that pose a serious threat to cities located in the vicinity of many volcanoes. Quito, capital city of Ecuador and placed at the foot of the Pichincha volcano complex, is exposed to serious inundation hazard as part of the city is built on numerous deposits of large lahars that have occurred in the last 10,000 years.The objective of this paper is to model the potential lahars of the Pichincha volcano to predict inundation areas within the city of Quito. For this purpose two models that apply different approaches were utilized and their results were compared.The programs used were LAHARZ, a semi-empirical model conceived by the United States Geological Survey (USGS), and FLO-2D, a hydraulic model distributed by FLO Software Inc. LAHARZ is designed as a rapid, objective and reproducible automated method for mapping areas of potential lahar inundation (Proc. First Int. Conf. on Debris Flow Hazards Mitigation, San Francisco, USA, ASCE, 1998, p. 176). FLO-2D is a two-dimensional flood routing model for simulating overland flow on complex surfaces such as floodplains, alluvial fans or urbanized areas (FLO-2D Users manual, version 99.2). Both models run within geographical information systems (GIS).Fieldwork was focused on collecting all available information involved in lahar modeling. A total of 49 channel cross-sections were measured along the two main streams and stratigraphic investigations were carried out on the fans to estimate the volume of previous events. A global positioning system was utilized to determine the coordinates of each cross-section. Further data collection concerned topography, rainfall characteristics and ashfall thicknesses. All fieldwork was carried out in cooperation with the Instituto Geofisico of the Escuela Politecnica Nacional.Modeling in a GIS environment greatly aided the exportation of results for the creation of thematic maps and facilitated model comparison. Evaluation of the models was performed by comparing simulation results against each other and against the geometry of existing lahar deposits.  相似文献   

Centrifuge modelling of the influence of crustal fabrics on the development of transfer zones: insights into the mechanics of continental rifting architecture   总被引：2，自引：0，他引：2  

Giacomo Corti   《Tectonophysics》2004,384(1-4):191-208

Centrifuge analogue experiments are used to model the reactivation of pre-existing crustal fabrics during extension. The models reproduced a weakness zone in the lower crust whose geometry was varied in order to investigate its role in controlling the architecture of rift segments and related transfer zones. The typical rift system geometry was characterised by two offset rift segments connected by a major transfer zone in which boundary faults were oblique to the extension vector and displayed a significant transcurrent component of movement. The transfer zone was also characterised by cross-basin faults with both trend and strike-slip component of movement opposite to that displayed by the master faults. Typically, different structural patterns were obtained by changing the offset angle φ between the rift segments, supporting that the structural pattern at transfer zones is strongly influenced by the orientation of pre-existing discontinuities with respect to the stretching vector. In the models, the aspect ratio (ratio of length vs. width) of the transfer zone shows a positive correlation with the offset angle (i.e., the more the inherited fabric is parallel to the extension direction, the longer and narrower the transfer zones). In case of staircase offset of the rift segments (φ=90°), the structural pattern was characterised by two isolated rift depressions linked by a narrow transfer zone in which border faults with alternating polarity overlapped. Prominent rise of the ductile lower crust was also observed at the transfer zone. Many of these geometrical features display striking similarities with natural rift systems. The results of the current experiments provide useful insights into the mechanics of continental rift architecture, supporting that rift propagation, width and along-axis segmentation may be strongly controlled by the reactivation of pre-existing pervasive crustal fabrics.  相似文献   

Snow model sensitivity analysis to understand spatial and temporal snow dynamics in a high‐elevation catchment          下载免费PDF全文

Michael Engel  Claudia Notarnicola  Stefano Endrizzi  Giacomo Bertoldi 《水文研究》2017,31(23):4151-4168

In this paper, we addressed a sensitivity analysis of the snow module of the GEOtop2.0 model at point and catchment scale in a small high‐elevation catchment in the Eastern Italian Alps (catchment size: 61 km²). Simulated snow depth and snow water equivalent at the point scale were compared with measured data at four locations from 2009 to 2013. At the catchment scale, simulated snow‐covered area (SCA) was compared with binary snow cover maps derived from moderate‐resolution imaging spectroradiometer (MODIS) and Landsat satellite imagery. Sensitivity analyses were used to assess the effect of different model parameterizations on model performance at both scales and the effect of different thresholds of simulated snow depth on the agreement with MODIS data. Our results at point scale indicated that modifying only the “snow correction factor” resulted in substantial improvements of the snow model and effectively compensated inaccurate winter precipitation by enhancing snow accumulation. SCA inaccuracies at catchment scale during accumulation and melt period were affected little by different snow depth thresholds when using calibrated winter precipitation from point scale. However, inaccuracies were strongly controlled by topographic characteristics and model parameterizations driving snow albedo (“snow ageing coefficient” and “extinction of snow albedo”) during accumulation and melt period. Although highest accuracies (overall accuracy = 1 in 86% of the catchment area) were observed during winter, lower accuracies (overall accuracy < 0.7) occurred during the early accumulation and melt period (in 29% and 23%, respectively), mostly present in areas with grassland and forest, slopes of 20–40°, areas exposed NW or areas with a topographic roughness index of ?0.25 to 0 m. These findings may give recommendations for defining more effective model parameterization strategies and guide future work, in which simulated and MODIS SCA may be combined to generate improved products for SCA monitoring in Alpine catchments.  相似文献   

Taxonomic analysis of the Quaternary archaeofauna found at The Lapa do Santo site,Lagoa Santa region,Brazil     

Artur Chahud  Gisele Ferreira Figueiredo  Gabriela Sartori Mingatos  Mercedes Okumura 《第四纪科学杂志》2021,36(7):1268-1278

The Lapa do Santo archaeological site, located in the Lagoa Santa region, Brazil, represents an important hunter-gatherer occupation dated from the Early and Middle Holocene. Prior studies of archaeofauna dating to this period are few and most of them only provide basic faunal identification with limited information on taphonomic processes. The main goal of this study is to identify the archaeofauna, record the taphonomic processes, and make inferences about its natural (interpreted as the death of the animal in the rockshelter area due to natural causes or due to predation) or anthropic origins. No extinct species (including megamastofauna) were identified. Taxonomic analysis indicated that most faunal remains consist of taxa that may be of mixed origin (natural or anthropic), such as microvertebrates and carnivorous mammals. The Cervidae are the main vertebrate family found in the studied material and these are likely the result of hunting. The Cervidae Ozotoceros support the presence of a fauna that is typical of savannah environments, although the assemblage contains mostly generalist fauna that can thrive in a variety of environments. Very few remains showed clear evidence for taphonomic processes related to human interaction, such as burnt bones.  相似文献   

Science-based approach for credible accounting of mitigation in managed forests     

Giacomo Grassi  Roberto Pilli  Jo House  Sandro Federici  Werner A. Kurz 《Carbon balance and management》2018,13(1):8

  相似文献   

Backward automatic calibration for three-dimensional landslide models     

Giacomo Titti  Giulia Bossi  Gordon G.D.Zhou  Gianluca Marcato  Alessandro Pasuto 《地学前缘(英文版)》2021,12(1):231-241

Back-analysis is broadly used for approaching geotechnical problems when monitoring data are available and information about the soils properties is of poor quality.For landslide stability assessment back-analysis calibration is usually carried out by time consuming trial-and-error procedure.This paper presents a new automatic Decision Support System that supports the selection of the soil parameters for three-dimensional models of landslides based on monitoring data.The method considering a pool of possible solutions,generated through permutation of soil parameters,selects the best ten configurations that are more congruent with the measured displacements.This reduces the operator biases while on the other hand allows the operator to control each step of the computation.The final selection of the preferred solution among the ten best-fitting solutions is carried out by an operator.The operator control is necessary as he may include in the final decision process all the qualitative elements that cannot be included in a qualitative analysis but nevertheless characterize a landslide dynamic as a whole epistemological subject,for example on the base of geomorphological evidence.A landslide located in Northeast Italy has been selected as example for showing the system potentiality.The proposed method is straightforward,scalable and robust and could be useful for researchers and practitioners.  相似文献   

Magma chambers and localization of deformation during thrusting     

Domenico Montanari  Giacomo Corti  Alexander Simakin 《地学学报》2010,22(5):390-395

Terra Nova, 22, 390–395, 2010 Abstract We present the results of coupled analogue and numerical models that provide new insights into the relationships between volcanoes and thrusts. The effects of both upper‐crustal magma chambers and the load of volcanoes on the geometry of thrust systems were investigated. Analogue modelling points to a strong influence exerted by a magma chamber on thrust geometry, which, as suggested by the numerical models used to rationalize these results, is related to the stress redistribution around the weak heterogeneity. The low‐viscosity body below a volcanic edifice localizes compressional deformation and causes a curvature of the thrusts towards the magma chamber, opposite to the direction of tectonic transport. In these conditions, the volcanic load has a negligible effect on the structural geometry. These results are in contrast with those of previous studies, where intrusions or the load of major volcanoes generated a curvature of the thrusts away from volcanic edifices in the direction of tectonic transport.  相似文献   

Trace element distributions in surficial sediments of the northern Tyrrhenian Sea: Contribution to heavy-metal pollution assessment     

Leonardo Leoni  Franco Sartori  Vincenzo Damiani  Ornella Ferretti  Monique Viel 《Environmental Geology》1991,17(2):103-116

The trace element distributions in surficial sediment of Tyrrhenian Sea have been investigated as a part of a series of studies on the environmental quality of the area off the Tuscany coast (west-central Italy). This research has focused on the presence of possible contaminated zones; it also provides data for the identification and future monitoring and control of pollution sources. The study of numerous surface sediments and core samples has made it possible to distinguish between heavy-metal enrichments related to natural sources and other anomalies caused by anthropogenic contamination. Over much of the basin, the surface Pb, Cu, Zn, and As contents appear considerably enriched relative to those below 15 cm; among these metals, Pb shows the highest and most widespread enrichment. Only in the case of some coarse-grained sediments close to the mouth of Cecina River it is possible to relate anomalously high Zn contents to natural sources. In all other sampling stations, the enrichments of Pb, Cu, Zn, and As are ascribed to man's influence. The sediment distributions of Co, Cr, and Ni do not seem to be related to anthropogenic activities; rather they mirror influx of materials derived from sources of ophiolitic rock. The distribution of barium shows only two significant positive anomalies, and both are related to natural causes. Concentrations of vanadium are high in a zone close to an important smelting plant; these are thought to be of anthropogenic origin.  相似文献