An Early Cretaceous slab window beneath central Tibet,SW China: Evidence from OIB‐like alkaline gabbros in the Duolong area     

Hao Wu  Shulin Sun  Haiyong Liu  Hao Chu  Wei Ding 《地学学报》2019,31(1):67-75

The geodynamic mechanism of the late Early Cretaceous magmatic flare‐up in the collisional zone between the Lhasa and Qiangtang terranes in Tibet is controversial because of a scarcity of robust evidence. To address this problem, we report geochronological, geochemical and Hf isotopic data for the newly discovered Gufeng gabbros from the Duolong Cu–Au mineral district of the western Bangong–Nujiang Suture Zone (BNSZ). The gabbro samples, dated at 126.3 ± 1.8 Ma, show geochemical similarities to typical ocean island basalt (OIB) and have positive εHf(t) values of +3.3 to +6.9. The gabbros were generated by decompression melting of deep upwelling asthenosphere. This event is best explained by slab break‐off and the resultant development of a slab window beneath central Tibet.  相似文献   

Directional interpolation infinite element for dynamic problems in saturated porous media     

Xiong Hao  Chen Qingsheng  Zhu Bingjian 《地震工程与工程振动(英文版)》2020,19(3):625-635

In this study, a directional interpolation infinite element suited to a saturated porous medium is presented to account for dynamic problems with semi-infi  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

^226Ra and ^228Ra in the Seawater of the Western Yellow Sea     

MEN Wu )  WEI Hao )  and LIU Guangshan )  * ) College of Oceanography  Environmental Science  Xiamen University  State Key Laboratory of Marine Environmental Science 《中国海洋大学学报(英文版)》2006,5(3):228-234

1Introduction Therearefourradiumisotopesinnature,ofwhich224Ra,226Raand228Rahavebeenwidelyinvestigated inmarineresearch,butthespecificactivityof223Rais toolowtobemeasured,therefore,itsapplicationsarelimited(Moore,1969;Broeckeretal.,1976;KuandLin,1976;Nozak…  相似文献   

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion     

Chengqing Wu  Yong Lu  Hong Hao 《国际地质力学数值与分析法杂志》2004,28(1):93-109

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

鄂尔多斯盆地东缘煤储层微孔隙结构特征及其影响因素   总被引：2，自引：0，他引：2  

张松航  汤达祯  唐书恒  许浩  林文姬  张彪 《地质学报》2008,82(10):1341-1349

在对鄂尔多斯盆地东缘58套采自不同层位不同地域煤样显微组分测试和低温液氮比表面测试的基础上,从比表面积、吸附曲线形态、阶段孔径结构分布、阶段孔径比表面积贡献、FHH分形特征几个方面刻画了煤储层微孔隙特征。同时,就“孔比表面积—孔隙结构—煤物质组成与化学结构”这一因果链,分析了鄂尔多斯盆地东缘煤微孔隙特征与煤变质程度、煤岩显微组分以及矿物组分与类型的关系。研究发现,Ro在0.60%~1.91%范围内,比表面积及FHH分形分维数先明显降低,Ro至1.3%后又略有回升,同时吸附回线“滞后环”及分形尺度对应的压力范围明显减小,孔径3~4 nm“墨水瓶”型孔明显减少乃至消失,并成为比表面积减少的主要贡献者。在相似煤级条件下,惰质组分较镜质组分有更多的比表面积贡献。粘土矿物组分含量>10%时,孔径3~4 nm“墨水瓶”型孔对比表面贡献明显,且随煤级增高影响作用相对加大。  相似文献   

阜新—朝阳高速公路段黄土三轴剪切特性研究     

李圃林  王常明  张立新  张浩  杨立建 《水文地质工程地质》2008,35(2):49-53

对取自阜新—朝阳高速公路段的黄土进行了14C测年、颗粒分析、湿陷及常规试验等,对比分析了其基本特性,通过三轴剪切试验,获得了不同含水量的黄土剪切孔压、固结孔压、抗剪强度及剪切变形的变化特征。分析认为,辽西黄土此类特性由黄土的物质成分和结构特征所决定。对不同含水量的黄土剪切变形曲线建立力学模型,拟合结果表明,对于脆性破坏的应变软化曲线,刘祖典模型描述的效果并不理想,而文中建议的经验模型则较为适合。  相似文献   

中韩无居民海岛及海岸带发展管理现状比较研究          下载免费PDF全文

王泉斌  许昊  张志卫  王晶  乔玥  郭振 《海洋开发与管理》2023,40(12):127-135

海岛和海岸带是国土资源的重要组成部分，提升其综合管理水平对促进沿海地区社会经济和海洋可持续发展具有重要意义。文章以中韩建交30周年和“联合国海洋科学促进可持续发展十年”为契机，通过对中韩无居民海岛及海岸带发展管理现状进行比较研究，探讨中韩两国在发展管理方面的异同和存在的问题。研究结果表明：在无居民海岛方面，中国以《中华人民共和国海岛保护法》为基本制度框架建立管理体系，韩国通过综合立法建立管理体系，海岛不合理利用是两国存在的共性问题；韩国重视无居民海岛的宣传，中国更加重视无居民海岛的分类。在海岸带方面，两国均采取综合管理的方式，但在实施程序上采用不同的方式，韩国由中央政府主导并交由地方政府实施综合管理，中国在综合管理体制下交由地方政府自行主导。基于研究结论，提出有针对性的管理措施和建议，促进两国海洋经济的可持续发展。  相似文献   

海上不同高度风速换算关系的研究   总被引：1，自引：0，他引：1  

陈永利  赵永平  张必成  杨连素  吴术礼  宋珊 《海洋科学》1989,13(3):27-31

本文用海上石油平台上观测的风梯度资料,计算了在不同风况下海面摩擦速度和粗糙高度。结果表明,海面摩擦速度u_*与海上10m高度处风速u_(10)的关系为u_*=0.055u_(10)-0.058。在4—5级风时,海面平均摩擦速度为50cm/s,粗糙度为0.022m,它相当于陆上的平均粗糙高度。在风速为2—3级时,二者与海上通常采用的数据接近。文中最后给出了上述两种风况下海上不同高度的换算系数。  相似文献   

渤海、黄海、东海海面热量平衡的平均状况——Ⅰ.资料处理和计算方法     

张必成  任允武  赵永平 《海洋科学》1990,14(3):26-30

渤、黄、东海海面热量平衡状况对该海域海洋水文和中国气候有着重要的影响。我们对该海域热量平衡各分量的年平均和年变化进行了计算,并分别就资料处理和计算方法、年平均状况、年变化特征等几个方面进行了分析。本文作为该项研究的第一部分,讨论了所用的资料和计算公式,提出了在稳定温度层结条件下的交换系数的校正方法。  相似文献