排序方式： 共有24条查询结果，搜索用时 15 毫秒
1.
Estimation of Rapidly Time-Varying Sparse Channels 总被引：2，自引：0，他引：2
The estimation of sparse shallow-water acoustic communication channels and the impact of estimation performance on the equalization of phase coherent communication signals are investigated. Given sufficiently wide transmission bandwidth, the impulse response of the shallow-water acoustic channel is often sparse as the multipath arrivals become resolvable. In the presence of significant surface waves, the multipath arrivals associated with surface scattering fluctuate rapidly over time, in the sense that the complex gain, the arrival time, and the Dopplers of each arrival all change dynamically. A sparse channel estimation technique is developed based on the delay-Doppler-spread function representation of the channel. The delay-Doppler-spread function may be considered as a first-order approximation to the rapidly time-varying channel in which each channel component is associated with Doppler shifts that are assumed constant over an averaging interval. The sparse structure of the delay-Doppler-spread function is then exploited by sequentially choosing the dominant components that minimize a least squares error. The advantage of this approach is that it captures both the channel structure as well as its dynamics without the need of explicit dynamic channel modeling. As the symbols are populated with the sample Dopplers, the increase in complexity depends on the channel Doppler spread and can be significant for a severely Doppler-spread channel. Comparison is made between nonsparse recursive least squares (RLS) channel estimation, sparse channel impulse response estimation, and estimation using the proposed approach. The results are demonstrated using experimental data. In training mode, the proposed approach shows a 3-dB reduction in signal prediction error. In decision-directed mode, it improves significantly the robustness of the performance of the channel-estimate-based equalizer against rapid channel fluctuations. 相似文献
2.
Propagation of 400-Hz sound through continental-shelf internal solitary wave packets is shown by numerical simulation to be strongly influenced by coupling of normal modes. Coupling in a packet is controlled by the mode coefficients at the point where sound enters the packet, the dimensions of the waves and packet, and the ambient depth structures of temperature and salinity. In the case of a moving packet, changes of phases of the incident modes with respect to each other dominate over the other factors, altering the coupling over time and thus inducing signal fluctuations. The phasing within a moving packet varies with time scales of minutes, causing coupling and signal fluctuations with comparable time scales. The directionality of energy flux between high-order acoustic modes and (less attenuated) low-order modes determines a gain factor for long-range propagation. A significant finding is that energy flux toward low-order modes through the effect of a packet near a source favoring high-order modes will give net amplification at distant ranges. Conversely, a packet far from a source sends energy into otherwise quiet higher modes. The intermittency of the coupling and of high-mode attenuation via bottom interaction means that signal energy fluctuations and modal diversity fluctuations at a distant receiver are complementary, with energy fluctuations suggesting a source-region packet and mode fluctuations suggesting a receiver-region packet. Simulations entailing 33-km propagation are used in the analyses, imitating the SWARM experiment geometry, allowing comparison with observations 相似文献
3.
Three techniques are used to investigate mode coupling as acoustic energy passes through continental-shelf internal solitary waves (ISW's). Results from all techniques agree. The waves considered here are single downward undulations of a thermocline layer separating upper and lower well-mixed layers. Two techniques are numerical: parabolic equation (PE) solution and a sudden approximation joining range-invariant regions at sharp vertical interfaces. The third technique is an analytic derivation of ISW scale lengths separating adiabatic (at large scale) and coupled-mode propagation. Results show that energy is exchanged between modes as ISW's are traversed. The sharp interface solutions help explain this in terms of spatially confined coupling and modal phase interference. Three regimes are observed: 1) for short ISW's, coupling upon wave entrance is reversed upon exit, with no net coupling; 2) for ISW scales of 75-200 m, modal phase alteration averts the exit reversal, giving net coupling; transparent resonances yielding no net coupling are also observed in this regime; and 3) for long ISW's, adiabaticity is probable but not universal. Mode refraction analysis for nonparallel acoustic-ISW alignment suggests that these two-dimensional techniques remain valid for 0° (parallel) to 65° (oblique) incidence, with an accordant ISW stretching 相似文献
4.
An Erratum has been published for this article in Earthquake Engineering & Structural Dynamics 33(6) 2004, 793. The dynamic stiffness of a foundation embedded in a multiple‐layered halfspace is calculated postulating one‐dimensional wave propagation in cone segments. In this strength‐of‐materials approach the sectional property of the cone segment increases in the direction of wave propagation. Reflections and refractions with waves propagating in corresponding cone segments occur at layer interfaces. Compared to rigorous procedures the novel method based on cone segments is easy to apply, provides conceptual clarity and physical insight in the wave propagation mechanisms. This method postulating one‐dimensional wave propagation in cone segments with reflections and refractions at layer interfaces is evaluated, calculating the dynamic stiffness of a foundation embedded in a multiple‐layered halfspace. For sites resting on a flexible halfspace and fixed at the base, engineering accuracy (deviation of ±20%) is achieved for all degrees of freedom with a vast parameter variation. The behaviour below the cut‐off frequency in an undamped site fixed at its base is also reliably predicted. The accuracy is, in general, better than for the method based on cone frustums, which can lead to negative damping. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
5.
Karst aquifers are a groundwater resource of global importance. Protection and contamination of karst water resources are often tackled by means of land-use planning and monitoring of physico-chemical and microbial water properties coupled to early-warning systems. However, these solutions of management do not integrate observational data on karst hydrodynamic, for example, tracer tests. Thus, this technical note aims at introducing a straightforward method for forecasting the arrival time of a tracer or a pollutant at a karst spring. Deliverables from the proposed method can assist professionals in the case of a pollution involving a swallow hole of the karst network. The approach is based on repeated tracer testing, gauging of spring flow rate and mathematical curve fitting. Tracer tests and gauging of spring flow rates are repeated under low, middle, and high flow periods. Arrival times of tracer from a given swallow hole of the network are plotted as a function of measured flow rates at the karst spring. The observational data are finally fitted by a mathematical function. Flow rate monitoring at high-temporal resolution at the karst spring and the mathematical functions allow forecasting the arrival of a tracer or a pollutant at the spring in the case of an accident involving a swallow hole of the network or estimating the duration of a pollution if hydrodynamic conditions do not change abruptly. The applicability of the method is documented by three study sites in Switzerland. 相似文献
6.
A modulation technique for increasing the reliable data rate achievable by an underwater acoustic communication system is presented and demonstrated. The technique, termed spatial modulation, seeks to control the spatial distribution of signal energy such that the single physical ocean channel supports multiple parallel communication channels. Given a signal energy constraint, a communication architecture with access to parallel channels will have increased capacity and reliability as compared to one with access to a single channel. Results from two experiments demonstrate higher obtainable data rates and power throughput for a system employing spatial modulation than for one that does not. The demonstrated benefits were characterized by an equivalent SNR gain of over 5 dB in the first experiment. In the second experiment, using two element source and receiver arrays with apertures of 0.9 m, a coherently modulated signal was shown to offer nearly 50% greater capacity by using spatial modulation than by using temporal modulation alone. 相似文献
7.
Numerical solutions for problems in coupled poromechanics suffer from spurious pressure oscillations when small time increments are used. This has prompted many researchers to develop methods to overcome these oscillations. In this paper, we present an overview of the methods that in our view are most promising. In particular we investigate several stabilized procedures, namely the fluid pressure Laplacian stabilization (FPL), a stabilization that uses bubble functions to resolve the fine‐scale solution within elements, and a method derived by using finite increment calculus (FIC). On a simple one‐dimensional test problem, we investigate stability of the three methods and show that the approach using bubble functions does not remove oscillations for all time step sizes. On the other hand, the analysis reveals that FIC stabilizes the pressure for all time step sizes, and it leads to a definition of the stabilization parameter in the case of the FPL‐stabilization. Numerical tests in one and two dimensions on 4‐noded bilinear and linear triangular elements confirm the effectiveness of both the FPL‐ and the FIC‐stabilizations schemes for linear and nonlinear problems. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
8.
G. Preisig A. Dematteis R. Torri N. Monin E. Milnes P. Perrochet 《Rock Mechanics and Rock Engineering》2014,47(3):869-884
Interception of aquifers by tunnel excavation results in water inflow and leads to drawdown of the water table which may induce ground settlement. In this work, analytical and numerical models are presented which specifically address these groundwater related processes in tunnel excavation. These developed models are compared and their performance as predictive tools is evaluated. Firstly, the water inflow in deep tunnels is treated. It is shown that introducing a reduction factor accounting for the effect of effective stress on hydrodynamic parameters avoids overestimation. This effect can be considered in numerical models using effective stress-dependent parameters. Then, quantification of ground settlement is addressed by a transient analytical solution. These solutions are then successfully applied to the data obtained during the excavation of the La Praz exploratory tunnel in the Western Alps (France), validating their usefulness as predictive tools. 相似文献
9.
Scattering functions from several experiments demonstrate that acoustic underwater channels are doubly spread. Receivers used on these channels to date have difficulty with large Doppler spreads. A receiver to perform coherent communication over Doppler spread channels is presented in this first paper of two. The receiver contains a channel tracker and a linear decoder. The tracker operates by means of a modified recursive least squares algorithm which makes use of frequency-domain filters called Doppler lines. The decoder makes use of the channel tracker coefficients in order to perform minimum mean square error decoding. This first paper treats theoretical aspects whereas the second part presents implementation issues and results 相似文献
10.
For pt. I see ibid., vol. 25, no. 1, p. 62-72 (2000). A receiver for coherent communication through underwater communication channels is analyzed. The receiver performance and stability versus delay spread, Doppler spread, and signal-to-noise ratio is quantified. The stability is governed by the ill-conditioning of a correlation matrix estimate and it sets the limit on how many taps should be used for a channel with a given number of degrees of freedom. The receiver is used extensively on both simulated and real data that are Doppler spread, and good performance in these channels is verified 相似文献