Optimal Filtering Algorithm for Stochastic 2-D FMM Ⅱ with Multiplicative Noise     

CHUDongsheng LIANGMeng SHIXin ZHANGLing 《中国海洋大学学报(英文版)》2004,3(1):106-110

1　Introduction　Inrecentyearstherehasbeengrowingresearchin terestinthetwo dimensional (2 D )systemtheory .The 2 Dsystemsmayfindapplicationsinareassuchasmarineseismicdataprocessingandimageprocessing .Althoughmoreandmorevaluableresultshavebeengained ,mos…  相似文献   

应用ATA的对数周期馈源方案于FAST的可能性探讨     

吴盛殷  熊继衮  吕善伟  张江林  徐祥  南仁东  金乘进 《天文学进展》2004,22(2):179-187

介绍应用于美国凤凰计划的Allen望远镜阵(ATA)的对数周期馈源(LPA)概况，初步给出此种馈源的基本参数及性能，仿真估算了其驻波比和方向图，并结合正在进行中的我国500m孔径球面射电望远镜(FAST)计划，探讨了应用这种宽带馈源的可能性及其限制。  相似文献   

Galileo系统及其在中国的应用   总被引：9，自引：0，他引：9  

韩玲  朱文耀 《天文学进展》2005,23(1):10-28

较详细地介绍了Galileo系统的全面体系结构、频率设计、服务内容及其广泛的应用范围，指出了它与GPS系统相比的优点，并对开发和增强Galileo系统在我国多层次、全方位的应用提出了建议。  相似文献   

信号流图求解部分分式展开     

马洪明  杨玲 《成都信息工程学院学报》1996,(4)

含有多重极点的有理真分式展开为部分分式，不需要计算低阶导数。列出被求函数的各阶导数的关系式，画出各阶导数作为节点的信号流图。该图无环路，既直观表现出各高阶导数的相互关系及影响的单向性，也使求节点增益的梅森公式特别简便。该方法将求高阶导数问题简化为代数运算，特别适合于编制成计算机程序  相似文献   

鱼卡煤田大煤沟组高分辨率层序地层特征及聚煤规律   总被引：1，自引：0，他引：1  

白生海  田景春  肖玲  张翔 《地层学杂志》2008,32(4)

利用高分辨率层序地层学理论和技术方法,综合地震、测井、岩芯和煤质资料对柴达木盆地北缘鱼卡煤田中下侏罗统大煤沟组地层河湖三角洲沉积体系进行高分辨率层序地层学分析,从中识别出短期、中期、长期3个级别的基准面旋回层序,划分出向上"变深"非对称型、向上"变浅"非对称型及对称型3种短期基准面旋回基本结构类型。依据等时地层对比法则进行不同级次基准面旋回层序的联井对比,建立了大煤沟组的等时地层格架,在等时地层格架内进行了煤层对比,并在等时地层格架内分析了聚煤规律。  相似文献   

等离子体质谱法测定玄武岩中微量元素三种样品预处理方法的比较   总被引：3，自引：1，他引：2  

韩江伟  熊小林  朱照宇  吴金花 《岩矿测试》2008,27(5):325-328

在测定玄武岩的微量元素时,为了保证得到的微量元素结果反映源区特征,需经预处理去除玄武岩的孔洞中充填的碳酸盐等物质。选取雷州半岛新生代玄武岩三个样品,每一个样品用三种预处理方法进行预处理,等离子体质谱法测定其中的微量元素。分析结果表明,用稀硝酸浸泡样品,会导致玄武岩中大多数微量元素严重丢失,得到的数据失真;而用稀盐酸浸泡去除碳酸盐的方法基本不改变玄武岩中微量元素的含量。  相似文献   

Case history of controlling a landslide at Panluo open-pit mine in China     

Zuoan Wei  Guangzhi Yin  Ling Wan  Louyan Shen 《Environmental Geology》2008,54(4):699-709

Controlling of landsides safely and economically is a great challenge to mine operators because landslides are major geological problems especially in open-pit mines. In this paper, a case history at Panluo open-pit mine is presented in detail to share the experiences and lessons with mine operators. Panluo open-pit mine is located in the southwestern Fujian province of China. It is the largest open-pit iron mine in the Fujian province and was planned in 1965 and is in full operation from 1978. In July 1990, an earthquake of magnitude 5.3 in Taiwan Strait and big rainstorms impacted the mine slope, causing tension cracks and rather large-scale failures, and forming a U-shaped landslide. Total potential volume was estimated to be up to 1.0 × 10⁶ m³. This directly threatened the mine production. In order to protect the mine production and the dwellers’ safety around, a dynamic comprehensive method was implemented including geotechnical investigations, in-situ testing and monitoring, stability analysis, and many mitigation and preventive measures. These measures slowed down the development and further occurrence of the landslide. The results showed that the landslides were still active, it was slowed with the control measures and moved rapidly with rainfall and mining down. However, no catastrophic accidents occurred and the pit mining was continued till it was closed at the elevation of 887 m in 2000. As a successful case of landslide control at an open-pit mine for 10 years, this paper reports the controlling measures in details. These experiences of landslide control may be beneficial to other similar mines for landslide control.  相似文献   

Shear strength characterization of municipal solid waste at the Suzhou landfill, China   总被引：5，自引：0，他引：5  

Tony L.T. Zhan  Y.M. Chen  W.A. Ling 《Engineering Geology》2008,97(3-4):97-111

The current practice of slope stability analysis for a municipal solid waste (MSW) landfill usually overlooks the dependence of waste properties on the fill age or embedment depth. Changes in shear strength of MSW as a function of fill age were investigated by performing field and laboratory studies on the Suzhou landfill in China. The field study included sampling from five boreholes advanced to the bottom of the landfill, cone penetration tests and monitoring of pore fluid pressures. Twenty-six borehole samples representative of different fill ages (0 to 13 years) were used to perform drained triaxial compression tests. The field and laboratory study showed that the waste body in the landfill can be sub-divided into several strata corresponding to different ranges of fill age. Each of the waste strata has individual composition and shear strength characteristics. The triaxial test results showed that the MSW samples exhibited a strain-hardening and contractive behavior. As the fill age of the waste increased from 1.7 years to 11 years, the cohesion mobilized at a strain level of 10% was found to decrease from 23.3 kPa to 0 kPa, and the mobilized friction angle at the same strain level increasing from 9.9° to 26°. For a confinement stress level greater than 50 kPa, the shear strength of the recently-placed MSW seemed to be lower than that of the older MSW. This behavior was consistent with the cone penetration test results. The field measurement of pore pressures revealed a perched leachate mound above an intermediate cover of soils and a substantial leachate mound near the bottom of the landfill. The measurements of shear strength properties and pore pressures were utilized to assess the slope stability of the Suzhou landfill.  相似文献   

遥感在滑坡灾害研究中的应用进展   总被引：9，自引：1，他引：8  

石菊松  吴树仁  石玲 《地质论评》2008,54(4):505-514

在对常用的光学遥感卫星影像、InSAR,LiDAR等遥感技术方法介绍的基础上,综述了这些方法在滑坡研究中的最新应用进展,从滑坡风险评估中的基础地形数据获取、滑坡编录与制图、监测、滑坡因素制图、承灾体制图等5个方面阐述遥感技术在滑坡风险中的支撑技术作用与应用前景。从遥感影像在滑坡风险评估中的作用、解译能力、影响解译的因素、精度评价和遥感数据源选择等角度阐述了常用遥感技术在滑坡风险评估应用中存在的问题,认为: ① 遥感技术在滑坡风险评估中的主要作用为数据、信息的获取与更新;② 滑坡的遥感影像解译能力取决于影像空间分辨率与待识别滑坡大小的相对关系,影像的时间分辨率、滑坡与其周边环境的对比度、立体影像的获取能力是利用遥感影像开展滑坡探测、识别与制图的关键要素;解译方法和解译员的专业素质是滑坡遥感解译的重要影响因素;③ 遥感影像与GIS空间分析、3D可视化的综合可有效增强滑坡识别与制图的效率和精度;④ 对于遥感解译滑坡的精度评价应针对具体影像的可解译性从有效解译,错误解译和遗漏解译三个方面予以客观评价;⑤ 滑坡风险评估应针对具体应用,从成本效益比的角度,本着“够用为止”原则合理选用遥感数据源。  相似文献   

JD直连式深孔绳索取心钻杆的研制与应用          下载免费PDF全文

许华松  覃强华  熊海书 《探矿工程》2008,35(10):33-35

根据深部找矿的需要,立足于我国目前钻探设备现状和材料冶炼及机械加工水平,通过对钻杆选材、结构、制造工艺的创新,研制了一种两端镦粗后整体热处理再车螺纹的新型深孔绳索取心钻杆及配套钻具,经使用,效果达到了设计要求。  相似文献