Re-Os isotope systematics and fractionation of siderophile elements in metal phases from CBa chondrites          下载免费PDF全文

Nao Nakanishi  Tetsuya Yokoyama  Satoki Okabayashi  Tomohiro Usui  Hikaru Iwamori 《Meteoritics & planetary science》2018,53(5):1051-1065

We report Os isotope compositions of metal grains in two CB_a chondrites (Bencubbin and Gujba) determined using a micromilling sampling coupled with thermal ionization mass spectrometry, together with the abundances of major and trace siderophile elements obtained by electron probe microanalysis and femtosecond laser ablation inductively coupled plasma–mass spectrometry. The CB_a metal grains presented ¹⁸⁷Os/¹⁸⁸Os ratios akin to carbonaceous chondrites with limited variations (0.1257–0.1270). Most of the CB_a metal grains were scattered along a ¹⁸⁷Re-¹⁸⁷Os reference isochron of IIIAB iron meteorites, indicating that the CB_a metals experienced limited Re-Os fractionation at the time of their formation. The Re/Os ratios of sampling spots for the CB_a metals, recast from the observed ¹⁸⁷Os/¹⁸⁸Os ratios, had a positive correlation with their Os/Ir ratios. In addition, the metal grains showed a positive correlation in a Pd/Fe versus Ni/Fe diagram. These correlations suggest that the CB_a metal grains have formed via equilibrium condensation or evaporation from a gaseous reservoir at ~10⁻⁴ bar with enhanced metal abundances. Compared to the Bencubbin metals, the Gujba metals are characterized by having systematically lower Pd/Fe and Ni/Fe ratios that span subchondritic values. Such a difference was most likely induced by the compositionally heterogeneous impact plume from which the metals were condensed.  相似文献   

Long-Term Effect of TMD on Vibration Control of An MDOF Offshore Fixed Platform     

SHI  Xiang 《中国海洋工程》2003,17(4):481-494

A three-dimensional fixed offshore platform in deep water modeled by the finite element method is studied in this paper. Analysis of the dynamic response of the MDOF structure is realized taking the non-linearity of the wave drag force and the wave-structure interaction into account. The structural response statistics, which have Gaussian distributions, are used to evaluate the vibration effect of the structure without TMD and with TMD. And an optimal method to design TMD controlling the first mode of the multi-mode structure is proposed. Moreover, the probabilities of occurrence of sea states at the platform site are considered for prediction of the long-term effect of a TMD. Simulation results demonstrate that the long-term effect of a well-designed TMD is good and the practical use is possible due to the good stability of its optimal parameters under different sea states.  相似文献   

Direct determination of barium in Sea water by inductively coupled plasma emission spectrometry     

Masahito Sugiyama  Masakazu Matsui  Eiichiro Nakayama 《Journal of Oceanography》1984,40(4):295-302

A method for the determination of barium in sea water was investigated using inductively coupled plasma emission spectrometry, and sea water samples from the Japan Sea and the Pacific Ocean were directly analyzed by this method. Artificial sea water was used to prepare matrix matched standard solutions to overcome the problem of physical interference. The detection limit (signal/noise ratio=2) for barium in deionized and distilled water was 0.08µg l^?1 and in sea water, 0.12µg l^?1. The reproducibilities in the purified water and in the sea water at the 10µg l^?1 level were 0.7% a#FFFFFFnd 0.5%, respectively. The barium concentration in both the Japan Sea and the Pacific Ocean increased with depth and ranged between 5.5–10.0µg l^?1 and 4.1–18.4µg l^?1, respectively.  相似文献   

Flux determination over a smooth surface under strongly unstable conditions     

Michiaki Sugita  Tetsuya Hiyama  Nobuhiko Endo  Shao-Fen Tian 《Boundary-Layer Meteorology》1995,73(1-2):145-158

Careful micrometeorological measurements on an empty parking lot allowed determination of the surface fluxes of sensible heatH and of momentum by applying profile equations derived from Monin-Obukhov similarity theory with two sets of the stability correction function for momentum _m and sensible heat _h . These fluxes were compared with reference values ofH independently determined by means of an eddy correlation technique. In general, better agreement was found betweenH values derived from profiles with the stability functions of Brutsaert (1992) and referenceH values, than when the Businger-Dyer functions were used to deriveH. The disagreement in the latter comparison was especially serious under strongly unstable conditions, with the value ofy=–z/L (wherez is the height andL is the Obukhov length) larger than 10. A closer look at the procedure for calculatingH from the profiles revealed that the large differences between theH values derived with these two different versions of the stability correction functions were caused by the small differences of the _h values, and not by the larger differences of the _m values. This result stems from the strong sensitivity of the resultingH values on the choice of _h .  相似文献   

Infrared polarization of venus: Its periodic fluctuations and evidence for thin haze     

Tetsuya Nagata  Shuji Sato  Tadashi Mukai  Sonoyo Mukai 《Icarus》1984,57(1):125-134

Infrared polarimetry of Venus over the phase angles from 18 to 171° has been made extending previous measurements (S. Sato, K. Kawara, Y. Kobayashi, H. Okuda, K. Noguchi, T. Mukai, and S. Mukai (1980). Icarus43, 288) in both wavelength λ and phase angle θ. The results of polarization measurements at 2.25 μm ? λ ? 5.0 μm are (i) small positive and negative values at K(2.25 μm), (ii) a remarkable variation with λ in the CVF(2.2?4.2μm) filter region, (iii) a nearly smooth curve as a function of θ having a peak value of ～36% at θ ～ 90° at both 3.6 μm and L′(3.8 μm), and (iv) a decrease with increasing field of view at M(5.0 μm) due to the contamination of thermal emission from the dark crescent. Furthermore, at 3.6 μm and L′(3.8 μm), (v) higher values at the poles than at the equator and (vi) 4.5- to 5.9-day periodic fluctuations are also found. From a comparison with model calculations, the results confirm the existence of a thin haze layer consisting of submicron-size particles above the main clouds of Venus; e.g., its optical thickness is about 0.1 at λ ～ 0.94 μm. In addition, result (vi) could be explained by a variation of the optical thickness of the haze layer or that of the brightness temperature of the main clouds.  相似文献   

Gravitational N-body problem on the accretion process of terrestrial planets     

Takafumi Matsui  Hitoshi Mizutani 《Icarus》1978,34(1):146-172

Numerical integration of the gravitational N-body problem has been carried out for a variety of photoplanetary clusters in the range N = 100 to 200. Particles are assumed to coagulate at collisions irrespective of relative velocity and mass ratio of the particles. It is shown graphically how the dispersed N-bodies accumulate to a single planet through mutual collisions. The velocity distribution and size distribution of bodies are also investigated as functions of time in the accretion process. The root mean square velocity of bodies in a cluster increases with time in an early stage of accretion but decreases with time in a late stage of accretion. Accretion rates of planets are found to be dependent strongly on the initial number density distribution, the initial size distribution, and the initial velocity distribution of bodies. Formation of satellites of about 10% in the planet mass is common to most cases in the present study. A substantial mass of bodies also escapes from the cluster. Many satellites and escapers formed during the accretion process of planets may be source materials of heavy bombardment in the early history of planets.  相似文献   

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used   总被引：1，自引：0，他引：1  

Hideki Shimada  Takashi Sasaoka  Saeid Khazaei  Yasuhiro Yoshida  Kikuo Matsui 《Geotechnical and Geological Engineering》2006,24(1):57-77

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.  相似文献   

Real Time Analysis and Forecasting of Strata Caving Behaviour during Longwall Operations     

S. Tadisetty  K. Matsui  H. Shimada  R. N. Gupta 《Rock Mechanics and Rock Engineering》2006,39(4):383-393

Summary. Discontinuous manual observations and irregular caving characteristics of roof rocks often lead to improper decisions resulting in accidents and production loss. Hence, systematic monitoring of the hanging roof behind the chock shields is necessary for safe and productive mining operations. A real-time application was successfully implemented in an Indian mine for forecasting of hanging roof behaviour to enhance safety and productivity. This paper reports the functioning of real-time TWAP (time weighted average pressure) analysis in the forecasting of hanging roof behaviour in real time.  相似文献   

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation   总被引：1，自引：0，他引：1  

Saeid Khazaei  Hideki Shimada  Takashi Kawai  Junichi Yotsumoto  Kikuo Matsui 《Geotechnical and Geological Engineering》2006,24(3):735-755

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.  相似文献   

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan     

Ahmed Belhadi    Tetsuya Nakanishi  Koichiro Watanabe  Eiji Izawa 《Resource Geology》2002,52(4):371-380

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.  相似文献