Direct determination of barium in Sea water by inductively coupled plasma emission spectrometry     

Masahito Sugiyama  Masakazu Matsui  Eiichiro Nakayama 《Journal of Oceanography》1984,40(4):295-302

A method for the determination of barium in sea water was investigated using inductively coupled plasma emission spectrometry, and sea water samples from the Japan Sea and the Pacific Ocean were directly analyzed by this method. Artificial sea water was used to prepare matrix matched standard solutions to overcome the problem of physical interference. The detection limit (signal/noise ratio=2) for barium in deionized and distilled water was 0.08µg l^?1 and in sea water, 0.12µg l^?1. The reproducibilities in the purified water and in the sea water at the 10µg l^?1 level were 0.7% a#FFFFFFnd 0.5%, respectively. The barium concentration in both the Japan Sea and the Pacific Ocean increased with depth and ranged between 5.5–10.0µg l^?1 and 4.1–18.4µg l^?1, respectively.  相似文献   

Gravitational N-body problem on the accretion process of terrestrial planets     

Takafumi Matsui  Hitoshi Mizutani 《Icarus》1978,34(1):146-172

Numerical integration of the gravitational N-body problem has been carried out for a variety of photoplanetary clusters in the range N = 100 to 200. Particles are assumed to coagulate at collisions irrespective of relative velocity and mass ratio of the particles. It is shown graphically how the dispersed N-bodies accumulate to a single planet through mutual collisions. The velocity distribution and size distribution of bodies are also investigated as functions of time in the accretion process. The root mean square velocity of bodies in a cluster increases with time in an early stage of accretion but decreases with time in a late stage of accretion. Accretion rates of planets are found to be dependent strongly on the initial number density distribution, the initial size distribution, and the initial velocity distribution of bodies. Formation of satellites of about 10% in the planet mass is common to most cases in the present study. A substantial mass of bodies also escapes from the cluster. Many satellites and escapers formed during the accretion process of planets may be source materials of heavy bombardment in the early history of planets.  相似文献   

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used   总被引：1，自引：0，他引：1  

Hideki Shimada  Takashi Sasaoka  Saeid Khazaei  Yasuhiro Yoshida  Kikuo Matsui 《Geotechnical and Geological Engineering》2006,24(1):57-77

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.  相似文献   

Real Time Analysis and Forecasting of Strata Caving Behaviour during Longwall Operations     

S. Tadisetty  K. Matsui  H. Shimada  R. N. Gupta 《Rock Mechanics and Rock Engineering》2006,39(4):383-393

Summary. Discontinuous manual observations and irregular caving characteristics of roof rocks often lead to improper decisions resulting in accidents and production loss. Hence, systematic monitoring of the hanging roof behind the chock shields is necessary for safe and productive mining operations. A real-time application was successfully implemented in an Indian mine for forecasting of hanging roof behaviour to enhance safety and productivity. This paper reports the functioning of real-time TWAP (time weighted average pressure) analysis in the forecasting of hanging roof behaviour in real time.  相似文献   

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation   总被引：1，自引：0，他引：1  

Saeid Khazaei  Hideki Shimada  Takashi Kawai  Junichi Yotsumoto  Kikuo Matsui 《Geotechnical and Geological Engineering》2006,24(3):735-755

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.  相似文献   

Kosa (yellow sand) components in precipitation collected at central Japan     

Tetsuji Chohji  Moritsugu Kitamura  Masahiro Tabata 《中国科学D辑(英文版)》2002,45(1):71-77

In east Asia, acidic gases derived from fossil fuel combustion have increased in the past decades. On the other hand, the Asian dust, also called Kosa (yellow sand) is transported following windstorms from arid lands in the Asian continent. Many researchers have been interested in the reaction between acidic aerosols and Kosa aerosols as well as the long-range transport of these emissions. To investigate the characteristics of chemical components in precipitation on a long-term basis over Japan, precipitation was sequentially collected from April 1984 to March 1997 at Kanazawa located near the coast of the Sea of Japan. Precipitation samples were collected at 1 mm intervals for the first 5 mm rainfall and all volume of rainwater after 6 mm for all precipitation events with an automatic wet only precipitation collector. According to the analyses of precipitation including Kosa aerosols during Kosa periods, the reaction in the air between Kosa and acidic components during the long-range transport was discussed.  相似文献   

MHD Dynamo Simulation Using the GeoFEM Platform: Comparison with a Spectral Method     

Hiroaki Matsui  Hiroshi Okuda 《Pure and Applied Geophysics》2004,161(11-12):2199-2212

— We investigate differences of results of a MHD dynamo simulation using the finite-element method (FEM) with that by the spherical harmonics expansion. The simulation was performed with a total of 7.8×10⁴ elements in the simulation domain. The results show that the magnetic energy is generated approximately four times of the kinetic energy in both cases. The outline of present results has consistence with that by the spectral method. However, small-scale patterns can be observed in the spectral method case. These discrepancies are caused by limitation of the spatial resolution in both of the present simulations.  相似文献   

Molecular dynamics study of MgSiO3 perovskite     

Masanori Matsui 《Physics and Chemistry of Minerals》1988,16(3):234-238

  相似文献   

An unusual zone of seismic coupling in the Bonin arc: The 1972 Hachijo-Oki earthquakes and related seismicity     

Tetsuji Moriyama  Fumiko Tajima  Tetsuzo Seno 《Pure and Applied Geophysics》1989,129(1-2):233-261

The 1972 February and December Hachijo-Oki earthquakes (M _s=7.3 and 7.4), in the northernmost part of the Izu-Bonin subduction zone, are the only major events (M _s>7.0) in the Bonin arc for the past 80 years. Relocation of the hypocenters, using one smaller event having a wellconstrained focal depth as a master event, shows that the depth of the February event is 10 km shallower than that of the December event. We have determined the rupture process for both events by minimizing the error in waveform between observed and synthetic seismograms. Although the number of available stations are limited, the depth range of the major energy release for the December event extends deeper than for the February one. The rupture propagated up-dip for both events. It is likely that the rupture zone of the two events overlapped, and that the December event ruptured the deeper part. This suggestion is consistent with the observation that the aftershock zones of both events overlap with that of the December event shifted landward. The waveforms of the December event have a smaller high frequency component than those of the February event, suggesting that the stress at the thrust zone became more uniform or reduced after the February event.No thrust type smaller event occurred near the rupture zone. Instead, theP-axes of smaller events are parallel to the dip of the slab and theirT-axes dip to the southwest. Focal depths of these events estimated byP-wave forward modeling are generally between 40–50 km and located beneath the thrust zone. We thus interpret them as the events within the Pacific slab near the zone ruptured by the two major events. The stress concentration around the rupture zone of the major events is suggested to have triggered these slab events. After the occurrence of the large events, the slab events are concentrated near the deeper portion of the rupture zone. These events may have been caused by the loading of the down-dip compressional stress near the down-dip end of the rupture zone due to the rupture. The occurrence of the doublet of large earthquakes and a number of down-dip compressional events beneath their rupture zones in a shallow portion of the subducting slab indicates an unusual zone of seismic coupling in the Bonin arc, most of which is seismically quiescent.  相似文献   

Preliminary results of a study on the responses of sedimentary rocks to shaft excavation     

Kozo Sugihara  Hisaya Yoshioka  Hiroya Matsui  Toshinori Sato 《Engineering Geology》1993,35(3-4):223-228

A shaft with a diameter of 6 m and a depth of 150 m was excavated in sedimentary rocks. Anin situ study was carried out to identify the size and rock properties of the zone disturbed by the excavation and to estimate the applicability of existing methods for measuring and modelling such a zone. The study detected displacements and changes in the properties of the rock within about 1 m of the shaft wall. Numerical analysis using a model of continuous rock mass can simulate some features of disturbance due to excavation, although slight discrepancies exist between the measured and analysed results. The excavation disturbance detected in this study is probably due to fracturing, the redistribution of stress and undersaturation. However, the relationships between the disturbance due to excavation and these processes have not been quantified. The existing methods for measurements and numerical analysis can provide important information on the disturbance due to excavation but need to be improved to understand disturbance due to excavation further.  相似文献