Evaluation of Interactions Between Oilfield Chemicals and Reservoir Rocks     

Wuyep  E. O.  Oluyemi  G. F.  Yates  K.  Akisanya  A. R. 《Natural Resources Research》2020,29(2):1239-1258

Natural Resources Research - Sand failure and production occurs when the formation stress exceeds the strength of the formation, which is derived majorly from the natural material that cements the...  相似文献   

High‐temperature gold‐copper extraction with chloride flux in lava tubes of Tolbachik volcano (Kamchatka)     

Vadim S. Kamenetsky  Alexander Belousov  Victor V. Sharygin  Liudmila M. Zhitova  Kathy Ehrig  Michael E. Zelenski  Ilya Chaplygin  Marina A. Yudovskaya  Pavel N. Nesterenko  Sergey M. Zakharov 《地学学报》2019,31(6):511-517

Subvolcanic environments in supra‐subduction zones are renowned for hosting epithermal deposits that often contain electrum and native gold, including bonanza examples. This study examined mineral assemblages and processes occurring in shallow‐crust volcanic settings using recent eruption (2012–2013) of the basaltic Tolbachik volcano in the Kamchatka arc. The Tolbachik eruptive system is characterized by an extensive system of lava tubes. After cessation of magma input, the tubes maintained the flow of hot oxidized gases that episodically interacted with the lava surfaces and sulphate‐chloride precipitates from volcanic gases on these surfaces. The gas‐rock interaction had strong pyrometamorphic effects that resulted in the formation of molten salt, oxidized (tenorite, hematite, Cu‐rich magnesioferrite) and skarn‐like silicate mineral assemblages. By analogy with experimental studies, we propose that a combination of these processes was responsible for extraction of metals from the basaltic wall rocks and deposition of Cu‐, Fe‐ and Cu‐Fe‐oxides and native gold.  相似文献   

Digital mapping of coastal boulders – high-resolution data acquisition to infer past and recent transport dynamics     

Fabian Boesl  Max Engel  Rodrigo C. Eco  JaN B. Galang  Lia A. Gonzalo  Francesca Llanes  Eva Quix  Helmut Brückner 《Sedimentology》2020,67(3):1393-1410

Coastal boulder fields provide clues to long-term frequency-magnitude patterns of coastal flooding events and have the potential to play an important role in coastal hazard assessment. Mapping boulders in the field is time and labour-intensive, and work on intertidal reef platforms, as in the present study, is physically challenging. By addressing coastal scientists who are not specialists in remote sensing, this contribution reports on the possibilities and limitations of digital applications in boulder mapping in Eastern Samar, Philippines, where recent supertyphoons Haiyan and Hagupit induced high waves, coastal flooding and boulder transport. It is demonstrated how satellite imagery of sub-metre resolution (from Pléiades and WorldView-3 imagery) enables efficient analysis of transport vectors and distances of larger boulders, reflecting variation in latitudes of both typhoon tracks and approaching angles of typhoon-generated waves. During the investigated events, boulders with a-axes of up to 8 m were clearly identified to have been shifted for up to 32 m, mostly along the seaward margin of the boulder field. It is, however, hard to keep track of smaller boulders, and the length of a-axes and b-axes including their orientation is often impossible to map with sufficient accuracy. Orthophotographs and digital surface models created through the application of an unmanned aerial vehicle and the ‘Structure from Motion’ technique provide ultra-high-resolution data, and have the potential to not only improve the results of satellite image analysis, but also those from field mapping and may significantly reduce overall time in the field. Orthophotographs permit unequivocal mapping of a-axes and b-axes including their orientation, while precise values for c-axes can be derived from the respective digital surface models. Volume of boulders is best inferred from boulder-specific Structure from Motion-based three-dimensional models. Battery power, flight speed and altitude determine the limits of the area covered, while patches shielded by the boulders are difficult to resolve. For some tasks, field mapping remains mandatory and cannot be replaced by currently available remote sensing tools: for example, sampling for rock type, density and age dating, recording of lithological separation of boulders from the underlying geological unit and of geomorphic features on a millimetre to decimetre-scale, or documentation of fine-grained sediment transport in between the boulders in supratidal settings. In terms of future events, the digital products presented here will provide a valuable reference to track boulder transport on a centimetre to decimetre-scale and to better understand the hydrodynamics of extreme-wave events on a fringing reef coastline.  相似文献   

Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition     

Miquel Poyatos‐Mor  George D. Jones  Rufus L. Brunt  Daniel E. Tek  David M. Hodgson  Stephen S. Flint 《Basin Research》2019,31(5):920-947

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.  相似文献   

Studies of Sedimentary Matter Fluxes along a Long-Term Transoceanic Transect in the North Atlantic and Arctic Interaction Area     

Klyuvitkin  A. A.  Novigatsky  A. N.  Politova  N. V.  Koltovskaya  E. V. 《Oceanology》2019,59(3):411-421

Oceanology - New data are presented on sedimentary matter fluxes and its main components along a meridional transect (59°30′ N) in the North Atlantic under the effect of multidirectional...  相似文献   

Prospects for Estimating the Properties of a Loose Surface from the Phase Profiles of Polarization and Intensity of the Scattered Light     

Petrova  E. V.  Tishkovets  V. P.  Nelson  R. M.  Boryta  M. D. 《Solar System Research》2019,53(3):172-180

It has been shown that the model of a scattering medium composed of clusters located in the far zones of each other allows some properties of regolith-like surfaces to be quantitatively estimated from the phase dependences of intensity and polarization measured in the backscattering domain. From the polarization profiles, the sizes of particles, the structure and porosity of the medium, and a portion of the surface area covered with a disperse material can be determined. At the same time, the intensity profiles of the scattered light weakly depend on the sizes and structure of particles; they are mainly controlled by the concentration of scatterers in the medium and the shadow-hiding contribution at small phase angles. Since the latter effect is beyond the considered model, a good agreement between the model and the measured intensity cannot be achieved. Nevertheless, if a portion of the surface that participates in coherent backscattering has been found from the phase profile of polarization, the present model makes it possible to determine the relative contribution of the shadow-hiding effect to the brightness surge measured at zero phase angle. This, in turn, may allow the roughness of the scattering surface to be estimated. The model contains no free parameters, but there is currently no possibility to verify it comprehensively by the data obtained in laboratory measurements of the samples with thoroughly controlled characteristics, because such measurements are rare for a wide range of the properties of particles in a medium, their packing density, and phase angles.

  相似文献   

Hyperspectral imaging of drill core from the Steen River impact structure,Canada: Implications for hydrothermal activity and formation of suevite‐like breccias     

E. A. MacLagan  E. L. Walton  C. D. K. Herd  B. Rivard 《Meteoritics & planetary science》2020,55(7):1564-1580

Hyperspectral imaging can be used to rapidly identify and map the spatial distributions of many minerals. Here, hyperspectral mapping in three wavelength regions (visible and near‐infrared, shortwave infrared, and thermal infrared) was applied to drill cores (ST001, ST002, and ST003) penetrating a continuous sequence of crater‐fill breccias from the Steen River impact structure in Alberta, Canada. The combined data sets reveal distinct mineralogical layering, with breccias derived predominantly from sedimentary rocks overlying those derived from granitic basement. This stratigraphy demonstrates that the breccias were not appreciably disturbed following deposition, which is inconsistent with formation models of similar breccias (suevites) by explosive impact melt–fluid interaction. At Steen River, volatiles from sedimentary target rocks were an inherent part of forming these enigmatic breccias. Approximately three quarters of terrestrial impact structures contain sedimentary target rocks; therefore, the role of volatiles in producing so‐called suevitic breccias may be more widespread than previously realized. The hyperspectral maps, specifically within the SWIR wavelength region, also delineate minerals associated with postimpact hydrothermal activity, including ammoniated clay and feldspar minerals not detectable using traditional techniques. These nitrogen‐bearing minerals may have originated from microbial processes, associated with oil‐ and gas‐producing units in the crater vicinity. Such minerals may have important implications for the production of habitable environments by impact‐induced hydrothermal activity on Earth and Mars.  相似文献   

Freshwater Sources in the Bays of Yuzhnyi Island of the Novaya Zemlya Archipelago According to Isotopic (δD, δ18O) Data     

Kossova  S. A.  Dubinina  E. O.  Chizhova  Ju. N.  Miroshnikov  A. Yu. 《Doklady Earth Sciences》2020,492(2):475-479

Doklady Earth Sciences - An isotope–geochemical study was performed on the waters of Abrosimov and Stepovoi bays along the southeastern coasts of the Novaya Zemlya Archipelago. The waters...  相似文献   

An integrated approach to assess the ecological and chemical status of lakes with HOD/AHOD: a case study of two lakes     

Serdar G?NCü  Erdem ALBEK 《中国海洋湖沼学报》2019,37(1):146-159

The thermal strati?cation of the lakes impedes the transfer of atmospheric oxygen into the lower layers of the lake. In lakes which are af fected by diverse anthropogenic in?uences, the increasing organic matter amounts lead to a sharp decrease in hypolimnetic oxygen amounts, aided by thermal strati?cation,and anaerobic conditions arise. The determination of hypolimnetic oxygen demand(HOD) and areal hypolimnetic oxygen demand(AHOD) and their monitoring represent an integrated approach to investigate the oxygenation of lakes, the nutrient conditions, and the physicochemical dynamics. In this study, two lakes dif fering by size and af fected by dif ferent anthropogenic sources, are investigated in this respect. At?rst, bathymetric studies were conducted to determine the depth, surface area, and volume relationships.Then, based on monitoring studies conducted in 2013 and 2014, the thermal strati?cation dynamics and layer properties were established using the relative thermal resistance to mixing(RTRM) index based on temperature and density pro?les. Following this, the oxygen depletion rates were determined by oxygen and temperature pro?ling in the hypolimnion. For the years of 2013 and 2014, the AHOD values for the Borabey Pond which is far from anthropogenic in?uences, were found to be 0.848 and 0.569 g O 2/(m·d), respectively.The AHOD values for the Porsuk Reservoir which was overburdened for years by industrial and domestic pollution were found to be 4.263 and 5.099 g O 2/(m·d), larger than its counterpart by almost sevenfold. The HOD and AHOD monitoring can be considered to a valuable tool for assessing the ecological and chemical status of lakes within Annex 5 of the Water Framework Directive and as an integrated approach to assess and monitor the status of lakes.  相似文献   

Local meteoric water lines describe extratropical precipitation     

Devin F. Smith  Elsa Saelens  Deborah L. Leslie  Anne E. Carey 《水文研究》2021,35(2):e14059

Stable water isotopes δ¹⁸O and δ²H are used to investigate precipitation trends and storm dynamics to advance knowledge of precipitation patterns in a warming world. Herein, δ¹⁸O and δ²H were used to determine the relationship between extratropical cyclonic precipitation and local meteoric water lines (LMWLs) in the eastern Ohio Valley and the eastern United States. Precipitation volume weighted and unweighted central Ohio LMWLs, created with samples collected during 2012–2018, showed that temperature had the greatest effect on precipitation isotopic composition. HYSPLIT back trajectory modelling showed that precipitation was primarily derived from a mid-continental moisture source. Remnants of major hurricanes were collected as extratropical precipitation during the 2012–2018 sampling period in central Ohio. Extratropical precipitation samples were not significantly different from the samples that created the central Ohio LMWL. Six additional LMWLs were derived from United States Geological Survey (USGS) Atmospheric Integrated Research Monitoring Network (AIRMoN) samples collected in Pennsylvania, Delaware, Tennessee, Vermont, New Hampshire, and Oxford, Ohio. Meteoric water lines describing published samples from Superstorm Sandy, plotted with these AIRMoN LMWLs, showed isotopic composition of Superstorm Sandy precipitation was commonly more depleted than the average isotopic composition at the mid-latitude locations. Meteoric water lines describing the Superstorm Sandy precipitation were not significantly different in slope from LMWLs generated within 300 km of the USGS AIRMoN site. This finding, which was observed across the eastern Ohio Valley and eastern United States, demonstrated a consistent precipitation δ²H–δ¹⁸O relationship for extratropical cyclonic and non-cyclonic events. This work also facilitates the analysis of storm development based on the relationship between extratropical event signature and the LMWL. Analysis of extratropical precipitation in relation to LMWLs along storm tracks allows for stronger development of precipitation models and understanding of which climatic and atmospheric factors determine the isotopic composition of precipitation.  相似文献