Fluid flow and pore pressure development throughout the evolution of a trough mouth fan,western Barents Sea     

Jaume Llopart  Roger Urgeles  Carl Fredrik Forsberg  Angelo Camerlenghi  Maarten Vanneste  Michele Rebesco  Renata Giulia Lucchi  Denise Christina Rüther  Hendrik Lantzsch 《Basin Research》2019,31(3):487-513

Using a combination of geophysical and geotechnical data from Storfjorden Trough Mouth Fan off southern Svalbard, we investigate the hydrogeology of the continental margin and how this is affected by Quaternary glacial advances and retreats over the continental shelf. The geotechnical results show that plumites, deposited during the deglaciation, have high porosities, permeabilities and compressibilities with respect to glacigenic debris flows and tills. These results together with margin stratigraphic models obtained from seismic reflection data were used as input for numerical finite element models to understand focusing of interstitial fluids on glaciated continental margins. The modelled evolution of the Storfjorden TMF shows that tills formed on the shelf following the onset of glacial sedimentation (ca. 1.5 Ma) acted as aquitards and therefore played a significant role in decreasing the vertical fluid flow towards the sea floor and diverting it towards the slope. The model shows that high overpressure ratios (up to λ ca. 0.6) developed below the shelf edge and on the middle slope. A more detailed model for the last 220 kyrs accounting for ice loading during glacial maxima shows that the formation of these aquitards on the shelf focused fluid flow towards the most permeable plumite sediments on the slope. The less permeable glacigenic debris flows that were deposited during glacial maxima on the slope hinder fluid evacuation from plumites allowing high overpressure ratios (up to λ ca. 0.7) to develop in the shallowest plumite layers. These high overpressures likely persist to the Present and are a critical precondition for submarine slope failure.  相似文献   

Lagged response of nutrient leaching to reduced surpluses at the field and catchment scales          下载免费PDF全文

Barbro Ulén  Göran Johansson  Katarina Kyllmar  Lovisa Stjernman Forsberg  Gunnar Torstensson 《水文研究》2015,29(13):3020-3037

  相似文献   

Joint 3D processing of active and passive seismic data     

Aldo Vesnaver  Lara Lovisa  Gualtiero Böhm 《Geophysical Prospecting》2010,58(5):831-844

Passive seismic provides additional illumination sources in producing reservoirs, improving the Earth's imaging obtained by standard 3D seismic surveys. The joint tomographic inversion of surface and borehole data, both active and passive, even allows the delineation of thin reservoirs that cannot be resolved by reflection tomography. As an application example, we present a feasibility study for a real case of CO₂ geological storage, showing that this operation may benefit both environment and reservoir monitoring. The origin time of micro‐earthquakes due to production operations is critical for merging active and passive data. We show here that the Wadati's method is not accurate for borehole data in a layered earth model, when the ratio between P and S velocities is not constant, as occurs in most hydrocarbon reservoirs. This drawback can be solved by deploying a few receivers at the surface close to the well.  相似文献   

The use of FFT techniques in physical geodesy   总被引：20，自引：0，他引：20  

K. P. Schwarz  M. G. Sideris  R. Forsberg 《Geophysical Journal International》1990,100(3):485-514

  相似文献   

Airborne gravimetry used in precise geoid computations by ring integration   总被引：1，自引：1，他引：0  

A. H. W. Kearsley  R. Forsberg  A. Olesen  L. Bastos  K. Hehl  U. Meyer  A. Gidskehaug 《Journal of Geodesy》1998,72(10):600-605

Two detailed geoids have been computed in the region of North Jutland. The first computation used marine data in the offshore areas. For the second computation the marine data set was replaced by the sparser airborne gravity data resulting from the AGMASCO campaign of September 1996. The results of comparisons of the geoid heights at on-shore geometric control showed that the geoid heights computed from the airborne gravity data matched in precision those computed using the marine data, supporting the view that airborne techniques have enormous potential for mapping those unsurveyed areas between the land-based data and the off-shore marine or altimetrically derived data. Received: 7 July 1997 / Accepted: 22 April 1998  相似文献   

The gravity field and GGOS     

R. Forsberg  M.G. Sideris  C.K. Shum   《Journal of Geodynamics》2005,40(4-5):387

The gravity field of the earth is a natural element of the Global Geodetic Observing System (GGOS). Gravity field quantities are like spatial geodetic observations of potential very high accuracy, with measurements, currently at part-per-billion (ppb) accuracy, but gravity field quantities are also unique as they can be globally represented by harmonic functions (long-wavelength geopotential model primarily from satellite gravity field missions), or based on point sampling (airborne and in situ absolute and superconducting gravimetry). From a GGOS global perspective, one of the main challenges is to ensure the consistency of the global and regional geopotential and geoid models, and the temporal changes of the gravity field at large spatial scales. The International Gravity Field Service, an umbrella “level-2” IAG service (incorporating the International Gravity Bureau, International Geoid Service, International Center for Earth Tides, International Center for Global Earth models, and other future new services for, e.g., digital terrain models), would be a natural key element contributing to GGOS. Major parts of the work of the services would, however, remain complementary to the GGOS contributions, which focus on the long-wavelength components of the geopotential and its temporal variations, the consistent procedures for regional data processing in a unified vertical datum and Terrestrial Reference Frame, and the ensuring validations of long-wavelength gravity field data products.  相似文献   

A dynamic deterministic model of hydrocarbon generation in the Midgard Field drainage area offshore Mid-Norway     

E. S. Mo  T. Throndsen  P. Andresen  S. A. Bäckström  A. Forsberg  S. Haug  B. Tørudbakken 《International Journal of Earth Sciences》1989,78(1):305-317

The Midgard Field offshore mid-Norway is a gas-condensate accumulation with a thin oil leg reservoired in Early and Middle Jurassic sandstones. There are two potential source rocks in the area; the Late Jurassic Spekk Formation is a marine shale with type II kerogen and a rich potential for oil, and the Åre Formation of Early Jurassic age which is a thick coal-bearing sequence with type III kerogen and potential mainly for gas. Geochemical analyses indicate that both the condensate and the oil leg are sourced mainly from the coal-bearing Åre Formation. Any contribution from the Spekk Formation appears to be of minor importance. Computer simulation of hydrocarbon generation in the drainage area for the Midgard Field indicates that huge volumes are formed, and confirms that hydrocarbon generation from the Åre Formation is volumetrically far more important than from the Spekk Formation. The simulation results also exclude any contribution to the reservoired gas from the Spekk Formation.

---

Zusammenfassung Das Midgard Feld vor der Küste Mittelnorwegens ist eine Gas-Kondensat-Akkumulation mit einem nur geringen Ölanteil innerhalb unter- und mitteljurassischer Sandsteine. In diesem Gebiet gibt es zwei mögliche Muttergesteine: Einmal die oberjurassische Spekk-Formation, bei der es sich um einen marinen Schiefer mit Typ II Kerogen handelt und die ein hohes Ölpotential darstellt. Zum anderen gibt es die unterjurassische Åre-Formation, eine mächtige Kohle-führende Folge mit Typ III Kerogen und ein möglicher Gaslieferant. Geochemische Analysen deuten darauf hin, daß sowohl das Gas-Kondensat als auch das Öl des Midgard Feldes auf diese Kohle-führende Åre-Formation zurückzuführen sind. Jede Zufuhr aus der Spekk-Formation scheint von geringer Bedeutung zu sein. Eine durch Computersimulation rekonstruierte Kohlenwasserstofferzeugung im Einzugsgebiet des Midgard Feldes spricht für eine hohe Bildungsrate und bestätigt die Annahme, daß die Kohlenwasserstoff-produktion der Spekk-Formation gegenüber der Åre-Formation zu vernachlässigen ist. Die Simulation ergab ferner, daß keinerlei Gas von der Spekk-Formation dem Reservoir zugeführt wurde.

---

Résumé Le champ off-shore de Midgard (Norvège moyenne) est une accumulation de gaz condensé accompagnée d'un mince corps d'huile, accumulation renfermée dans des grès d'âge jurassique inférieur et moyen. Il existe dans le secteur deux sources possibles: la formation de Spekk (shale marins du Jurassique tardif, à kérogène de type II, possédant un riche potentiel en huile) et la formation d'Åre (série épaisse jurassique inférieure, à couches de charbon, à kérogène de type III et potentiel essentiellement en gaz). Les analyses géochimiques montrent que le gaz condensé et l'huile ont tous deux comme origine la formation charbonneuse de Åre. La formation de Spekk ne semble être intervenue que de manière subordonnée. Une simulation par ordinateur de la genèse de l'hydrocarbure dans l'aire d'alimentation du champ de Midgard fait apparaître que des volumes importants ont été formés et confirme la large prépondérance de la formation de Åre parmi les roches-mères. De plus, cette simulation exclut toute expèce de contribution de la formation de Spekk dans la genèse du gaz.

---

Midgard / / . : Spekk — , 2, , Are , 3 . . . , Are. Spekk, , . Midgard , Are . , , Spekk .

  相似文献   

Experience with the ULISS-30 inertial survey system for local geodetic and cadastral network control     

Rene Forsberg 《Journal of Geodesy》1991,65(3):179-188

The capability of the recently developed SAGEM ULISS-30 inertial survey system for performing local surveys at high accuracies have been tested in a field campaign carried out November 1989 on the island of Fyn, Denmark, in cooperation with the Swedish National Land Survey. In the test a number of lines between existing national geodetic control points were surveyed, along with points in the less reliably determined cadastral network, forming an irregular network pattern of 10–15 km extent. The survey involved frequent offset measurements (up to 50–100 m) with an ISS-integrated total station. The profile geometries were not particularly suited for inertial surveys, with narrow and rather winding roads, necessitating frequent vehicle turns. In addition to the pure inertial surveys a kinematic GPS/inertial test was also carried out, using a pair of Ashtech L-XII receivers. The inertial survey results, analyzed with a smoothing algoritm utilizing common points on forward/backward runs, indicate that 5-cm accuracies are possible on reasonably straight profiles of 5 km length, corresponding to a 10 ppm best-case accuracy for double-run traverses. On longer, more winding traverses error levels of 10–20 cm are typical. To handle the inertial data optimally, proper network adjustments are required. A discussion of suitable adjustment models of both conventional and collocation type is included in the paper.  相似文献   

An Overview of Electrokinetic Consolidation of Soils     

Mona Malekzadeh  Julie Lovisa  Nagaratnam Sivakugan 《Geotechnical and Geological Engineering》2016,34(3):759-776

Electrokinetic stabilization is one of the techniques that improve the geotechnical properties of the soils. It was pioneered by Casagrande in late 1940s and has not seen much development since then, especially in large-scale field applications. Some bench scale studies have been carried out during the past two decades and there have been some small scale field studies and limited field applications, mostly on soft soils. Due to lack of understanding of the physiochemical and electrochemical changes in the soil during electrokinetic stabilization, uncertain energy costs, loss of efficiency with time and the corrosion of electrodes, this method is usually considered as a last resort for large-scale practical applications. The objective of this paper is to highlight the critical parameters affecting electrokinetic consolidation, and to discuss their effects on the efficiency of the process. A better understanding of these critical parameters and their effects will enable geotechnical engineers to design the electrokinetic consolidation operation more effectively and make it an economically viable process for many situations.  相似文献   

Geotechnical Properties of River-fed Sediments Compared with Glacier-fed Sediments     

S. L. Yang  A. Solheim  C. F. Forsberg  T. Kvalstad  X. L. Feng  A. L. Li 《Marine Georesources & Geotechnology》2013,31(4):281-295

This paper discusses the influence of sedimentary environment and geological setting on geotechnical and physical properties of resulting sedimentary deposits. For this study, two different geological settings were considered, one is a river-fed and the other is a glacier-fed sedimentary environment. For both sedimentary environments, various geotechnical properties were considered and compared. These include plasticity, activity, compressibility, undrained shear strength and sensitivity. Results indicate that physical and geotechnical properties of sediments deposited in these two settings are significantly different. These differences are then interpreted in terms of the various mechanisms involved in submarine slope failure initiation in river-fed versus glacier-fed sedimentary environments.  相似文献