Evaluation of the Residual Mass Fractionation in High-Precision Cr Isotopic Analysis with TIMS     

Tetsuya Yokoyama  Yusuke Ohkuma  Keiji Nishikawa  Koki Sumiya  Ikshu Gautam 《Geostandards and Geoanalytical Research》2023,47(2):415-435

The Cr isotope ratios of terrestrial and extra-terrestrial materials are emerging as one of the most important tracers in geosciences. Previous studies on Cr isotopic measurements using TIMS have found that there is residual Cr isotopic fractionation between the mass-fractionation-corrected ⁵³Cr/⁵²Cr and ⁵⁴Cr/⁵²Cr ratios, which may cause an offset of obtained ratios from the reference values. The residual fractionation was thought to be caused by the evaporation of Cr-oxide species during thermal ionisation, but the mechanism by which this residual fractionation could be reduced remained unclear. Here we revisit the issue of residual fractionation and propose that this problem can be alleviated by utilising W filaments instead of conventionally used Re filaments for Cr ionisation. Using W filaments, the formation of CrO⁺ was suppressed during heating as the filament temperature was ~ 100 °C lower than when Re filaments were used. In repeated measurement of a carbonaceous chondrite, the intermediate precisions of ⁵³Cr/⁵²Cr and ⁵⁴Cr/⁵²Cr ratios in the W filament runs were two to three times better than those of the Re filament runs. Therefore, the new finding of this study will be of key importance for future studies of Cr isotopes for terrestrial and extra-terrestrial materials.  相似文献   

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction          下载免费PDF全文

Christian Auel  Ismail Albayrak  Tetsuya Sumi  Robert M. Boes 《地球表面变化过程与地形》2017,42(9):1384-1396

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Re-Os isotope systematics and fractionation of siderophile elements in metal phases from CBa chondrites          下载免费PDF全文

Nao Nakanishi  Tetsuya Yokoyama  Satoki Okabayashi  Tomohiro Usui  Hikaru Iwamori 《Meteoritics & planetary science》2018,53(5):1051-1065

We report Os isotope compositions of metal grains in two CB_a chondrites (Bencubbin and Gujba) determined using a micromilling sampling coupled with thermal ionization mass spectrometry, together with the abundances of major and trace siderophile elements obtained by electron probe microanalysis and femtosecond laser ablation inductively coupled plasma–mass spectrometry. The CB_a metal grains presented ¹⁸⁷Os/¹⁸⁸Os ratios akin to carbonaceous chondrites with limited variations (0.1257–0.1270). Most of the CB_a metal grains were scattered along a ¹⁸⁷Re-¹⁸⁷Os reference isochron of IIIAB iron meteorites, indicating that the CB_a metals experienced limited Re-Os fractionation at the time of their formation. The Re/Os ratios of sampling spots for the CB_a metals, recast from the observed ¹⁸⁷Os/¹⁸⁸Os ratios, had a positive correlation with their Os/Ir ratios. In addition, the metal grains showed a positive correlation in a Pd/Fe versus Ni/Fe diagram. These correlations suggest that the CB_a metal grains have formed via equilibrium condensation or evaporation from a gaseous reservoir at ~10⁻⁴ bar with enhanced metal abundances. Compared to the Bencubbin metals, the Gujba metals are characterized by having systematically lower Pd/Fe and Ni/Fe ratios that span subchondritic values. Such a difference was most likely induced by the compositionally heterogeneous impact plume from which the metals were condensed.  相似文献   

3-D internal architecture of methane hydrate-bearing turbidite channels in the eastern Nankai Trough, Japan     

Satoshi Noguchi  Naoyuki Shimoda  Osamu Takano  Nobutaka Oikawa  Takao Inamori  Tatsuo Saeki  Tetsuya Fujii 《Marine and Petroleum Geology》2011,28(10):1817-1828

The reservoir architecture of methane hydrate (MH) bearing turbidite channels in the eastern Nankai Trough, offshore Japan is evaluated using a combination of 3-D seismic and well data. On the 3-D seismic section, the MH-bearing turbidite channels correspond to complex patterns of strong seismic reflectors, which show the 3-D internal architecture of the channel complex. A seismic-sequence stratigraphic analysis reveals that the channel complex can be roughly classified into three different stages of depositional sequence (upper, middle, and lower). Each depositional sequence results in a different depositional system that primarily controls the reservoir architecture of the turbidite channels. To construct a 3-D facies model, the stacking patterns of the turbidite channels are interpreted, and the reservoir heterogeneities of MH-bearing sediments are discussed. The identified channels at the upper sequence around the β1 well exhibit low-sinuosity channels consisting of various channel widths that range from tens to several hundreds of meters. Paleo-current flow directions of the turbidite channels are typically oriented along the north-northeast-to-south-southwest direction. High-amplitude patterns were identified above the channels along the north-to-south and north-northeast-to-south-southeast directions. These roughly coincide with the paleo-current flow of the turbidite channels. An interval velocity using high-density velocity analysis shows that velocity anomalies (>2000 m/s) are found on the northeastern side of the turbidite channels. The depositional stage of the northeastern side of the turbidite channels exhibits slightly older sediment stages than the depositional stages of the remaining channels. Hence, the velocity anomalies of the northeastern side of the channels are related to the different stages of sediment supply, and this may lead to the different reservoir architectures of the turbidite channels.  相似文献   

Development of partial factor design method on bending strength of piles for Japanese Specifications for Highway Bridges     

Toshiaki Nanazawa  Tetsuya Kouno  Gaku Sakashita  Takashi Nakaura 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2019,13(3):176-184

ABSTRACT

This paper describes the development of a partial factor design method on the bending strength of piles for the Japanese Specifications for Highway Bridges. First, uncertainties in mobilised bending moments and yield bending moments were evaluated by Monte Carlo simulations. Second, the reliability of piles designed by the previous specifications were evaluated on the basis of reliability analysis considering uncertainties in the mobilised bending moments, yield bending moments, and other factors. Finally, a partial factor design method utilising a survey subsurface investigation method and ground type was developed to reach target reliability levels determined by the Standards.  相似文献   

Dune-forming winds on Titan and the influence of topography   总被引：1，自引：0，他引：1  

Tetsuya Tokano 《Icarus》2008,194(1):243-262

Numerous extended dunes on Saturn's moon Titan detected by the Cassini RADAR constrain the long-term pattern of surface winds. We analyse the statistics of surface wind speed and direction and their spatial and temporal variability predicted by a general circulation model (GCM) in order to constrain surface wind predictions of this GCM by dune observations. The model shows that modern winds are sufficient for saltation and dune formation at low latitudes, in agreement with the presence of dunes there. The best condition for the dune-forming wind occurs with a threshold friction speed of 0.02 m s⁻¹ or slightly less. The equatorial region is conducive to longitudinal dunes because of a combined effect of a high sand drift potential and obtuse bimodal wind pattern oblique to the equator caused by the seasonal reversal of the Hadley circulation. The cross-equatorial wind is steady, and is characterised by a high Weibull shape parameter (k∼4). The wind pattern at higher latitudes is more complex and gusty, and neither longitudinal nor transversal dunes would be able to form. Putative large-scale topography is found to have a profound influence on the near-surface wind pattern. Generally mountains cause a convergence and speeding up on the flank, while basins weaken the wind and cause a divergent flow. Longitudinal dunes can be deflected on the foot of mountains by up to 90°. If Xanadu is a hypothetical large mountain, a wind pattern converging in Xanadu that entirely disagrees with the dune observations is predicted. If instead Xanadu is a large basin, the wind arcs clockwise north of Xanadu and anti-clockwise west and southwest of Xanadu, in agreement with the dune orientations in the vicinity of Xanadu. The albedo pattern has comparatively little influence on the wind field. Isolated mountain chains cause only local-scale change in the wind pattern. However, the persistent surface easterlies in Belet, which are in conflict with the dune orientations, do not disappear by any combination of large-scale topography.  相似文献   

Instability of coral limestone cliffs due to extreme waves     

Tetsuya Kogure  Yukinori Matsukura 《地球表面变化过程与地形》2010,35(11):1357-1367

Many boulders are located around the coastal cliffs with height of below 5 m made of coral limestone at Kuro‐shima, Okinawa, Japan. The origin of the boulders appears to be coral limestone cliffs which show developed notches. We undertook stability analysis, involving the wave pressure due to tsunamis, of wave‐induced collapse of the cliffs. We find that extreme waves are capable of inducing cliff collapse, as observed in circumstances where gravity is insufficient. Copyright © 2010 John Wiley and Sons, Ltd.  相似文献   

Critical notch depths for failure of coastal limestone cliffs: case study at Kuro‐shima Island,Okinawa, Japan     

Tetsuya Kogure  Yukinori Matsukura 《地球表面变化过程与地形》2010,35(9):1044-1056

Development of a notch at the base of a cliff reduces cliff stability and often induces a collapse. Pleistocene limestone coastal cliffs of elevation 5?m in Kuro‐shima, Ryukyu Islands, have a prominent notch with a depth of 3–4?m at their bases. Around these coastal cliffs, collapses different from previous studies of cliff collapses in the Ryukyu Islands were found; collapses in Kuro‐shima have a horizontal failure surface. The horizontal failure surface, situated at the height of the failure surface corresponding to the retreat point of the notch, is bounded by vertical joints cutting the whole cliff and the reef flat in front of the cliff. Two types of horizontal failure surface were found, triangular and quadrangular; the distinction appears to depend on the angle between the vertical joints and the front face of the cliff. Prior to collapse, these cliffs appear to have been separated from the adjacent cliffs by the development of vertical joints. Consequently, a cliff that will collapse can be identified in advance; cliff instability is strongly dependent on the development of a notch. To study the effect of notch development on cliff collapse, the notch depth at which collapse occurs was calculated using stability analysis. Instability of a cliff increases with notch depth; collapse occurs at the horizontal failure surface when the ratio of the notch depth to the seaward length of the cliff is approximately 0·5–0·7 for a triangular failure surface, and 0·7–0·9 for a quadrangular failure surface. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Meteorological assessment of the surface temperatures on Titan: constraints on the surface type     

Tetsuya Tokano 《Icarus》2005,173(1):222-242

The latitudinal profile of near-surface air temperature on Titan retrieved by Voyager 1 has been difficult to understand and raised several speculations about possible exotic processes that might be occurring near Titan's surface, while the thermal properties of the surface itself are unknown. This study systematically investigates the seasonal and spatial variation of the surface temperature and air temperature in the lower troposphere by a 3-dimensional general circulation model for different putative surface types (porous icy regolith, rock-ice mixture, hydrocarbon lakes). For any viable surface type the surface temperature is unlikely to be constant through the year and should more or less vary seasonally and even diurnally, most likely by a few K. Recent observations of tropospheric clouds may be evidence of seasonal variation of the surface temperature and the model predicts in the case of solid surface the development of a convective layer with superadiabatic lapse rates near the surface exactly at those latitudes and seasons where clouds have been identified. The latitudinal profile of the surface temperature retrieved from Voyager 1 infrared spectra can be explained without invoking exotic effects, provided the thermal inertia of the surface is relatively small and/or the surface albedo is low. A dominance of water ice (high thermal inertia and high albedo) at the surface is unfavorable to reproduce the observation. The latitudinal gradient of the surface temperature is particularly large at the hydrocarbon lake surface due to low albedo and small surface drag. Local anomalies of the surface albedo or surface thermal inertia are likely to cause substantial inhomogeneities of the surface temperature. Quasi-permanent accumulation of stratospheric haze at both poles would create a perennial equator-to-pole contrast of the surface temperature, but also a substantially lower global-mean surface temperature due to an enhanced anti-greenhouse effect in summer. The air temperature in the lower troposphere exhibits a tiny latitudinal gradient and a pole-to-pole gradient due to the presence of a pole-to-pole Hadley circulation, indicating that the temperature within the planetary boundary layer may exhibit a vertical profile characteristic of season, location and scenario. There may be a shallow near-surface inversion layer in cold seasons and a shallow convective layer in warm seasons.  相似文献   

Hydrometeorological behaviour of pine and larch forests in eastern Siberia     

Shuko Hamada  Takeshi Ohta  Tetsuya Hiyama  Takashi Kuwada  Atsuhiro Takahashi  Trofim C. Maximov 《水文研究》2004,18(1):23-39

Seasonal changes in the water and energy exchanges over a pine forest in eastern Siberia were investigated and compared with published data from a nearby larch forest. Continuous observations (April to August 2000) were made of the eddy‐correlation sensible heat flux and latent heat flux above the canopy. The energy balance was almost closed, although the sum of the turbulent fluxes sometimes exceeded the available energy flux (R_n ? G) when the latent heat flux was large; this was related to the wind direction. We examined the seasonal variation in energy balance components at this site. The seasonal variation and magnitude of the sensible heat flux (H) was similar to that of the latent heat flux (λE), with maximum values occurring in mid‐June. Consequently, the Bowen ratio was around 1·0 on many days during the study period. On some clear days just after rainfall, λE was very large and the sum of H and λE exceeded R_n ? G. The evapotranspiration rate above the dry canopy from May to August was 2·2 mm day^?1. The contributions of understory evapotranspiration (E_u) and overstory transpiration (E_o) to the evapotranspiration of the entire ecosystem (E_t) were both from 25 to 50% throughout the period analysed. These results suggest that E_u plays a very important role in the water cycle at this site. From snowmelt through the tree growth season (23 April to 19 August 2000), the total incoming water, comprised of the sum of precipitation and the water equivalent of the snow at the beginning of the melt season, was 228 mm. Total evapotranspiration from the forest, including interception loss and evaporation from the soil when the canopy was wet, was 208–254 mm. The difference between the incoming and outgoing amounts in the water balance was from +20 to ?26 mm. The water and energy exchanges of the pine and larch forest differed in that λE and H increased slowly in the pine forest, whereas λE increased rapidly in the larch forest and H decreased sharply after the melting season. Consequently, the shape of the Bowen ratio curves at the two sites differed over the period analysed, as a result of the differences in the species in each forest and in soil thawing. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献